From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 68659C4332F for ; Thu, 15 Dec 2022 15:19:07 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230175AbiLOPTF (ORCPT ); Thu, 15 Dec 2022 10:19:05 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:46256 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230059AbiLOPSV (ORCPT ); Thu, 15 Dec 2022 10:18:21 -0500 Received: from mail.hugovil.com (mail.hugovil.com [162.243.120.170]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 4D56AC70; Thu, 15 Dec 2022 07:18:19 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=hugovil.com ; s=x; h=Subject:Content-Transfer-Encoding:MIME-Version:References: In-Reply-To:Message-Id:Date:Cc:To:From:Sender:Reply-To:Content-Type: Content-ID:Content-Description:Resent-Date:Resent-From:Resent-Sender: Resent-To:Resent-Cc:Resent-Message-ID:List-Id:List-Help:List-Unsubscribe: List-Subscribe:List-Post:List-Owner:List-Archive; bh=93BpRoQca1NquGcy51NScGuvojh7/iuZ0TUbanDmc/E=; b=YLMnlpqQYsCMooD65o0qavlFV0 Mr/Zc+DEXDLagiHezge4uw47CPPxCbCgvOG1Lmj1HQhnvvc2LB2ktR0ORuJ9yyOCDmUG+UFcpGgIb p1jQECwB9fjzsYg1LQuQONsqH1V1nwztOKDmWyr2lCbltoNAjz+TeZC7ZldTS1qnkISw=; Received: from modemcable168.174-80-70.mc.videotron.ca ([70.80.174.168]:48102 helo=pettiford.lan) by mail.hugovil.com with esmtpa (Exim 4.92) (envelope-from ) id 1p5pmJ-0000EC-9e; Thu, 15 Dec 2022 10:04:07 -0500 From: Hugo Villeneuve To: a.zummo@towertech.it, alexandre.belloni@bootlin.com, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org Cc: linux-rtc@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, hugo@hugovil.com, Hugo Villeneuve Date: Thu, 15 Dec 2022 10:02:09 -0500 Message-Id: <20221215150214.1109074-9-hugo@hugovil.com> X-Mailer: git-send-email 2.30.2 In-Reply-To: <20221215150214.1109074-1-hugo@hugovil.com> References: <20221215150214.1109074-1-hugo@hugovil.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-SA-Exim-Connect-IP: 70.80.174.168 X-SA-Exim-Mail-From: hugo@hugovil.com Subject: [PATCH v3 08/14] rtc: pcf2127: add support for PCF2131 interrupts on output INT_A X-SA-Exim-Version: 4.2.1 (built Wed, 08 May 2019 21:11:16 +0000) X-SA-Exim-Scanned: Yes (on mail.hugovil.com) Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Hugo Villeneuve The PCF2127 and PCF2129 have one output interrupt pin. The PCF2131 has two, named INT_A and INT_B. The hardware support that any interrupt source can be routed to either one or both of them. Force all interrupt sources to go to the INT A pin. Support to route any interrupt source to INT A/B pins is not supported by this driver at the moment. Signed-off-by: Hugo Villeneuve --- drivers/rtc/rtc-pcf2127.c | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) diff --git a/drivers/rtc/rtc-pcf2127.c b/drivers/rtc/rtc-pcf2127.c index 4148e135f935..68af4d0438b8 100644 --- a/drivers/rtc/rtc-pcf2127.c +++ b/drivers/rtc/rtc-pcf2127.c @@ -191,6 +191,7 @@ struct pcf21xx_config { int max_register; unsigned int has_nvmem:1; unsigned int has_bit_wd_ctl_cd0:1; + unsigned int has_int_a_b:1; /* PCF2131 supports two interrupt outputs. */ u8 regs_td_base; /* Time/data base registers. */ u8 regs_alarm_base; /* Alarm function base registers. */ u8 reg_wd_ctl; /* Watchdog control register. */ @@ -879,6 +880,7 @@ static struct pcf21xx_config pcf21xx_cfg[] = { .max_register = 0x1d, .has_nvmem = 1, .has_bit_wd_ctl_cd0 = 1, + .has_int_a_b = 0, .regs_td_base = PCF2127_REG_TIME_DATE_BASE, .regs_alarm_base = PCF2127_REG_ALARM_BASE, .reg_wd_ctl = PCF2127_REG_WD_CTL, @@ -902,6 +904,7 @@ static struct pcf21xx_config pcf21xx_cfg[] = { .max_register = 0x19, .has_nvmem = 0, .has_bit_wd_ctl_cd0 = 0, + .has_int_a_b = 0, .regs_td_base = PCF2127_REG_TIME_DATE_BASE, .regs_alarm_base = PCF2127_REG_ALARM_BASE, .reg_wd_ctl = PCF2127_REG_WD_CTL, @@ -925,6 +928,7 @@ static struct pcf21xx_config pcf21xx_cfg[] = { .max_register = 0x36, .has_nvmem = 0, .has_bit_wd_ctl_cd0 = 0, + .has_int_a_b = 1, .regs_td_base = PCF2131_REG_TIME_DATE_BASE, .regs_alarm_base = PCF2131_REG_ALARM_BASE, .reg_wd_ctl = PCF2131_REG_WD_CTL, @@ -1017,6 +1021,28 @@ static int pcf2127_enable_ts(struct device *dev, int ts_id) return ret; } +/* Route all interrupt sources to INT A pin. */ +static int pcf2127_configure_interrupt_pins(struct device *dev) +{ + struct pcf2127 *pcf2127 = dev_get_drvdata(dev); + int ret; + + /* Mask bits need to be cleared to enable corresponding + * interrupt source. + */ + ret = regmap_write(pcf2127->regmap, + PCF2131_REG_INT_A_MASK1, 0); + if (ret) + return ret; + + ret = regmap_write(pcf2127->regmap, + PCF2131_REG_INT_A_MASK2, 0); + if (ret) + return ret; + + return ret; +} + static int pcf2127_probe(struct device *dev, struct regmap *regmap, int alarm_irq, const char *name, const struct pcf21xx_config *config) { @@ -1076,6 +1102,15 @@ static int pcf2127_probe(struct device *dev, struct regmap *regmap, set_bit(RTC_FEATURE_ALARM, pcf2127->rtc->features); } + if (pcf2127->cfg->has_int_a_b) { + /* Configure int A/B pins, independently of alarm_irq. */ + ret = pcf2127_configure_interrupt_pins(dev); + if (ret) { + dev_err(dev, "failed to configure interrupt pins\n"); + return ret; + } + } + if (pcf2127->cfg->has_nvmem) { struct nvmem_config nvmem_cfg = { .priv = pcf2127, -- 2.30.2