Hello Linus,

On Fri, Nov 18, 2022 at 11:44:04PM +0100, Uwe Kleine-König wrote:
> From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
> 
> .probe_new() doesn't get the i2c_device_id * parameter, so determine
> that explicitly in the probe function.
> 
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
> ---
>  drivers/pinctrl/pinctrl-mcp23s08_i2c.c | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/pinctrl/pinctrl-mcp23s08_i2c.c b/drivers/pinctrl/pinctrl-mcp23s08_i2c.c
> index e0b001c8c08c..b635c5737e0c 100644
> --- a/drivers/pinctrl/pinctrl-mcp23s08_i2c.c
> +++ b/drivers/pinctrl/pinctrl-mcp23s08_i2c.c
> @@ -8,8 +8,9 @@
>  
>  #include "pinctrl-mcp23s08.h"
>  
> -static int mcp230xx_probe(struct i2c_client *client, const struct i2c_device_id *id)
> +static int mcp230xx_probe(struct i2c_client *client)
>  {
> +	const struct i2c_device_id *id = i2c_client_get_device_id(client);
>  	struct device *dev = &client->dev;
>  	unsigned int type = id->driver_data;
>  	struct mcp23s08 *mcp;
> @@ -100,7 +101,7 @@ static struct i2c_driver mcp230xx_driver = {
>  		.name	= "mcp230xx",
>  		.of_match_table = mcp23s08_i2c_of_match,
>  	},
> -	.probe		= mcp230xx_probe,
> +	.probe_new	= mcp230xx_probe,
>  	.id_table	= mcp230xx_id,
>  };

To eventually get all drivers converted to probe_new it would be great
if you picked this patch and #511 for pinctrl.

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | https://www.pengutronix.de/ |