linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Konrad Dybcio <konrad.dybcio@linaro.org>
To: linux-arm-msm@vger.kernel.org, andersson@kernel.org,
	agross@kernel.org, krzysztof.kozlowski@linaro.org
Cc: marijn.suijten@somainline.org, bryan.odonoghue@linaro.org,
	Konrad Dybcio <konrad.dybcio@linaro.org>,
	Georgi Djakov <djakov@kernel.org>,
	linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 08/10] interconnect: qcom: rpm: Handle interface clocks
Date: Tue, 10 Jan 2023 14:22:00 +0100	[thread overview]
Message-ID: <20230110132202.956619-9-konrad.dybcio@linaro.org> (raw)
In-Reply-To: <20230110132202.956619-1-konrad.dybcio@linaro.org>

Some (but not all) providers (or their specific nodes) require
specific clocks to be turned on before they can be accessed. Failure
to ensure that results in a seemingly random system crash (which
would usually happen at boot with the interconnect driver built-in),
resulting in the platform not booting up properly.

Limit the number of bus_clocks to 2 (which is the maximum that SMD
RPM interconnect supports anyway) and handle non-scaling clocks
separately. Update MSM8996 and SDM660 drivers to make sure they do
not regress with this change.

This unfortunately has to be done in one patch to prevent either
compile errors or broken bisect.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 drivers/interconnect/qcom/icc-rpm.c | 48 ++++++++++++++++++++++-------
 drivers/interconnect/qcom/icc-rpm.h | 10 ++++--
 drivers/interconnect/qcom/msm8996.c | 22 ++++++-------
 drivers/interconnect/qcom/sdm660.c  | 16 ++++------
 4 files changed, 60 insertions(+), 36 deletions(-)

diff --git a/drivers/interconnect/qcom/icc-rpm.c b/drivers/interconnect/qcom/icc-rpm.c
index 150ae89e0a1a..12c58f9237e8 100644
--- a/drivers/interconnect/qcom/icc-rpm.c
+++ b/drivers/interconnect/qcom/icc-rpm.c
@@ -460,28 +460,43 @@ int qnoc_probe(struct platform_device *pdev)
 	qnodes = desc->nodes;
 	num_nodes = desc->num_nodes;
 
-	if (desc->num_bus_clocks) {
-		cds = desc->bus_clocks;
-		cd_num = desc->num_bus_clocks;
+	if (desc->num_intf_clocks) {
+		cds = desc->intf_clocks;
+		cd_num = desc->num_intf_clocks;
 	} else {
-		cds = bus_clocks;
-		cd_num = ARRAY_SIZE(bus_clocks);
+		/* 0 intf clocks is perfectly fine */
+		cd_num = 0;
 	}
 
-	qp = devm_kzalloc(dev, struct_size(qp, bus_clks, cd_num), GFP_KERNEL);
+	qp = devm_kzalloc(dev, struct_size(qp, intf_clks, cd_num), GFP_KERNEL);
 	if (!qp)
 		return -ENOMEM;
 
-	qp->bus_clk_rate = devm_kcalloc(dev, cd_num, sizeof(*qp->bus_clk_rate),
-					GFP_KERNEL);
-	if (!qp->bus_clk_rate)
-		return -ENOMEM;
-
 	data = devm_kzalloc(dev, struct_size(data, nodes, num_nodes),
 			    GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
 
+	for (i = 0; i < cd_num; i++)
+		qp->intf_clks[i].id = cds[i];
+	qp->num_intf_clks = cd_num;
+
+	if (desc->num_bus_clocks) {
+		cds = desc->bus_clocks;
+		cd_num = desc->num_bus_clocks;
+	} else {
+		cds = bus_clocks;
+		cd_num = ARRAY_SIZE(bus_clocks);
+	}
+
+	/*
+	 * This is not realistic, scaling is only possible with an
+	 * always-active and an active-only clock, or at least one
+	 * of them in some very bizzare cases.
+	 */
+	if (WARN_ON(cd_num > 2))
+		cd_num = 2;
+
 	for (i = 0; i < cd_num; i++)
 		qp->bus_clks[i].id = cds[i];
 	qp->num_bus_clks = cd_num;
@@ -522,6 +537,14 @@ int qnoc_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
+	ret = devm_clk_bulk_get(dev, qp->num_intf_clks, qp->intf_clks);
+	if (ret)
+		return ret;
+
+	ret = clk_bulk_prepare_enable(qp->num_intf_clks, qp->intf_clks);
+	if (ret)
+		return ret;
+
 	if (desc->has_bus_pd) {
 		ret = dev_pm_domain_attach(dev, true);
 		if (ret)
@@ -540,6 +563,7 @@ int qnoc_probe(struct platform_device *pdev)
 	ret = icc_provider_add(provider);
 	if (ret) {
 		dev_err(dev, "error adding interconnect provider: %d\n", ret);
+		clk_bulk_disable_unprepare(qp->num_intf_clks, qp->intf_clks);
 		clk_bulk_disable_unprepare(qp->num_bus_clks, qp->bus_clks);
 		return ret;
 	}
@@ -573,6 +597,7 @@ int qnoc_probe(struct platform_device *pdev)
 	return 0;
 err:
 	icc_nodes_remove(provider);
+	clk_bulk_disable_unprepare(qp->num_intf_clks, qp->intf_clks);
 	clk_bulk_disable_unprepare(qp->num_bus_clks, qp->bus_clks);
 	icc_provider_del(provider);
 
@@ -585,6 +610,7 @@ int qnoc_remove(struct platform_device *pdev)
 	struct qcom_icc_provider *qp = platform_get_drvdata(pdev);
 
 	icc_nodes_remove(&qp->provider);
+	clk_bulk_disable_unprepare(qp->num_intf_clks, qp->intf_clks);
 	clk_bulk_disable_unprepare(qp->num_bus_clks, qp->bus_clks);
 	icc_provider_del(&qp->provider);
 
diff --git a/drivers/interconnect/qcom/icc-rpm.h b/drivers/interconnect/qcom/icc-rpm.h
index d55d2bd44b7d..b4888e4cb74a 100644
--- a/drivers/interconnect/qcom/icc-rpm.h
+++ b/drivers/interconnect/qcom/icc-rpm.h
@@ -24,20 +24,24 @@ enum qcom_icc_type {
  * struct qcom_icc_provider - Qualcomm specific interconnect provider
  * @provider: generic interconnect provider
  * @num_bus_clks: the total number of bus_clks clk_bulk_data entries
+ * @num_intf_clks: the total number of intf_clks clk_bulk_data entries
  * @type: the ICC provider type
  * @regmap: regmap for QoS registers read/write access
  * @qos_offset: offset to QoS registers
  * @bus_clk_rate: bus clock rate in Hz
  * @bus_clks: the clk_bulk_data table of bus clocks
+ * @intf_clks: the clk_bulk_data table of interface clocks
  */
 struct qcom_icc_provider {
 	struct icc_provider provider;
 	int num_bus_clks;
+	int num_intf_clks;
 	enum qcom_icc_type type;
 	struct regmap *regmap;
 	int qos_offset;
-	u64 *bus_clk_rate;
-	struct clk_bulk_data bus_clks[];
+	u64 bus_clk_rate[2];
+	struct clk_bulk_data bus_clks[2];
+	struct clk_bulk_data intf_clks[];
 };
 
 /**
@@ -93,6 +97,8 @@ struct qcom_icc_desc {
 	size_t num_nodes;
 	const char * const *bus_clocks;
 	size_t num_bus_clocks;
+	const char * const *intf_clocks;
+	size_t num_intf_clocks;
 	bool has_bus_pd;
 	enum qcom_icc_type type;
 	const struct regmap_config *regmap_cfg;
diff --git a/drivers/interconnect/qcom/msm8996.c b/drivers/interconnect/qcom/msm8996.c
index 69fc50a6fa5c..1a5e0ad36cc4 100644
--- a/drivers/interconnect/qcom/msm8996.c
+++ b/drivers/interconnect/qcom/msm8996.c
@@ -21,21 +21,17 @@
 #include "smd-rpm.h"
 #include "msm8996.h"
 
-static const char * const bus_mm_clocks[] = {
-	"bus",
-	"bus_a",
+static const char * const mm_intf_clocks[] = {
 	"iface"
 };
 
-static const char * const bus_a0noc_clocks[] = {
+static const char * const a0noc_intf_clocks[] = {
 	"aggre0_snoc_axi",
 	"aggre0_cnoc_ahb",
 	"aggre0_noc_mpu_cfg"
 };
 
-static const char * const bus_a2noc_clocks[] = {
-	"bus",
-	"bus_a",
+static const char * const a2noc_intf_clocks[] = {
 	"aggre2_ufs_axi",
 	"ufs_axi"
 };
@@ -1821,8 +1817,8 @@ static const struct qcom_icc_desc msm8996_a0noc = {
 	.type = QCOM_ICC_NOC,
 	.nodes = a0noc_nodes,
 	.num_nodes = ARRAY_SIZE(a0noc_nodes),
-	.bus_clocks = bus_a0noc_clocks,
-	.num_bus_clocks = ARRAY_SIZE(bus_a0noc_clocks),
+	.intf_clocks = a0noc_intf_clocks,
+	.num_intf_clocks = ARRAY_SIZE(a0noc_intf_clocks),
 	.has_bus_pd = true,
 	.regmap_cfg = &msm8996_a0noc_regmap_config
 };
@@ -1866,8 +1862,8 @@ static const struct qcom_icc_desc msm8996_a2noc = {
 	.type = QCOM_ICC_NOC,
 	.nodes = a2noc_nodes,
 	.num_nodes = ARRAY_SIZE(a2noc_nodes),
-	.bus_clocks = bus_a2noc_clocks,
-	.num_bus_clocks = ARRAY_SIZE(bus_a2noc_clocks),
+	.intf_clocks = a2noc_intf_clocks,
+	.num_intf_clocks = ARRAY_SIZE(a2noc_intf_clocks),
 	.regmap_cfg = &msm8996_a2noc_regmap_config
 };
 
@@ -2005,8 +2001,8 @@ static const struct qcom_icc_desc msm8996_mnoc = {
 	.type = QCOM_ICC_NOC,
 	.nodes = mnoc_nodes,
 	.num_nodes = ARRAY_SIZE(mnoc_nodes),
-	.bus_clocks = bus_mm_clocks,
-	.num_bus_clocks = ARRAY_SIZE(bus_mm_clocks),
+	.intf_clocks = mm_intf_clocks,
+	.num_intf_clocks = ARRAY_SIZE(mm_intf_clocks),
 	.regmap_cfg = &msm8996_mnoc_regmap_config
 };
 
diff --git a/drivers/interconnect/qcom/sdm660.c b/drivers/interconnect/qcom/sdm660.c
index a22ba821efbf..0e8a96f4ce90 100644
--- a/drivers/interconnect/qcom/sdm660.c
+++ b/drivers/interconnect/qcom/sdm660.c
@@ -127,15 +127,11 @@ enum {
 	SDM660_SNOC,
 };
 
-static const char * const bus_mm_clocks[] = {
-	"bus",
-	"bus_a",
+static const char * const mm_intf_clocks[] = {
 	"iface",
 };
 
-static const char * const bus_a2noc_clocks[] = {
-	"bus",
-	"bus_a",
+static const char * const a2noc_intf_clocks[] = {
 	"ipa",
 	"ufs_axi",
 	"aggre2_ufs_axi",
@@ -1516,8 +1512,8 @@ static const struct qcom_icc_desc sdm660_a2noc = {
 	.type = QCOM_ICC_NOC,
 	.nodes = sdm660_a2noc_nodes,
 	.num_nodes = ARRAY_SIZE(sdm660_a2noc_nodes),
-	.bus_clocks = bus_a2noc_clocks,
-	.num_bus_clocks = ARRAY_SIZE(bus_a2noc_clocks),
+	.intf_clocks = a2noc_intf_clocks,
+	.num_intf_clocks = ARRAY_SIZE(a2noc_intf_clocks),
 	.regmap_cfg = &sdm660_a2noc_regmap_config,
 };
 
@@ -1659,8 +1655,8 @@ static const struct qcom_icc_desc sdm660_mnoc = {
 	.type = QCOM_ICC_NOC,
 	.nodes = sdm660_mnoc_nodes,
 	.num_nodes = ARRAY_SIZE(sdm660_mnoc_nodes),
-	.bus_clocks = bus_mm_clocks,
-	.num_bus_clocks = ARRAY_SIZE(bus_mm_clocks),
+	.intf_clocks = mm_intf_clocks,
+	.num_intf_clocks = ARRAY_SIZE(mm_intf_clocks),
 	.regmap_cfg = &sdm660_mnoc_regmap_config,
 };
 
-- 
2.39.0


  parent reply	other threads:[~2023-01-10 13:22 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20230110132202.956619-1-konrad.dybcio@linaro.org>
2023-01-10 13:21 ` [PATCH v2 01/10] interconnect: qcom: rpm: Don't set QoS params before non-zero bw is requested Konrad Dybcio
2023-01-10 14:00   ` Bryan O'Donoghue
2023-01-10 17:05     ` Konrad Dybcio
2023-01-10 13:21 ` [PATCH v2 02/10] interconnect: qcom: rpm: make QoS INVALID default, separate out driver data Konrad Dybcio
2023-01-10 23:13   ` Bryan O'Donoghue
2023-01-10 23:47     ` Konrad Dybcio
2023-01-16 13:06       ` Konrad Dybcio
2023-01-10 13:21 ` [PATCH v2 03/10] interconnect: qcom: rpm: Always set QoS params on QNoC Konrad Dybcio
2023-01-10 23:36   ` Bryan O'Donoghue
2023-01-10 13:21 ` [PATCH v2 04/10] interconnect: qcom: rpm: Add support for specifying channel num Konrad Dybcio
2023-01-10 23:44   ` Bryan O'Donoghue
2023-01-10 23:55     ` Konrad Dybcio
2023-01-10 23:58       ` Bryan O'Donoghue
2023-01-10 13:21 ` [PATCH v2 05/10] interconnect: qcom: Sort kerneldoc entries Konrad Dybcio
2023-01-10 13:21 ` [PATCH v2 06/10] interconnect: qcom: rpm: Rename icc desc clocks to bus_blocks Konrad Dybcio
2023-01-11 11:05   ` Bryan O'Donoghue
2023-01-10 13:21 ` [PATCH v2 07/10] interconnect: qcom: rpm: Rename icc provider num_clocks to num_bus_clocks Konrad Dybcio
2023-01-10 13:22 ` Konrad Dybcio [this message]
2023-01-10 13:22 ` [PATCH v2 09/10] interconnect: qcom: rpm: Add a way to always set QoS registers Konrad Dybcio
2023-01-10 13:22 ` [PATCH v2 10/10] interconnect: qcom: rpm: Don't use clk_get_optional for bus clocks anymore Konrad Dybcio

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230110132202.956619-9-konrad.dybcio@linaro.org \
    --to=konrad.dybcio@linaro.org \
    --cc=agross@kernel.org \
    --cc=andersson@kernel.org \
    --cc=bryan.odonoghue@linaro.org \
    --cc=djakov@kernel.org \
    --cc=krzysztof.kozlowski@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=marijn.suijten@somainline.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).