From: Oleksij Rempel <o.rempel@pengutronix.de>
To: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Abel Vesa <abelvesa@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
Richard Cochran <richardcochran@gmail.com>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>,
kernel@pengutronix.de, Fabio Estevam <festevam@gmail.com>,
NXP Linux Team <linux-imx@nxp.com>,
Russell King <linux@armlinux.org.uk>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-clk@vger.kernel.org, netdev@vger.kernel.org
Subject: [PATCH v2 06/19] ARM: dts: imx6dl-alti6p: configure ethernet reference clock parent
Date: Tue, 17 Jan 2023 07:14:40 +0100 [thread overview]
Message-ID: <20230117061453.3723649-7-o.rempel@pengutronix.de> (raw)
In-Reply-To: <20230117061453.3723649-1-o.rempel@pengutronix.de>
On this board the PHY is the ref clock provider. So, configure ethernet
reference clock as input.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
arch/arm/boot/dts/imx6dl-alti6p.dts | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/imx6dl-alti6p.dts b/arch/arm/boot/dts/imx6dl-alti6p.dts
index e8325fd680d9..e6a4e2770640 100644
--- a/arch/arm/boot/dts/imx6dl-alti6p.dts
+++ b/arch/arm/boot/dts/imx6dl-alti6p.dts
@@ -22,6 +22,7 @@ clock_ksz8081: clock-ksz8081 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <50000000>;
+ clock-output-names = "enet_ref_pad";
};
i2c2-mux {
@@ -191,6 +192,13 @@ &can1 {
status = "okay";
};
+&clks {
+ clocks = <&clock_ksz8081>;
+ clock-names = "enet_ref_pad";
+ assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+ assigned-clock-parents = <&clock_ksz8081>;
+};
+
&ecspi1 {
cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
@@ -208,10 +216,6 @@ &fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rmii";
- clocks = <&clks IMX6QDL_CLK_ENET>,
- <&clks IMX6QDL_CLK_ENET>,
- <&clock_ksz8081>;
- clock-names = "ipg", "ahb", "ptp";
status = "okay";
mdio {
--
2.30.2
next prev parent reply other threads:[~2023-01-17 6:15 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-17 6:14 [PATCH v2 00/19] ARM: imx: make Ethernet refclock configurable Oleksij Rempel
2023-01-17 6:14 ` [PATCH v2 01/19] clk: imx: add clk-gpr-mux driver Oleksij Rempel
2023-01-29 17:36 ` Abel Vesa
2023-01-17 6:14 ` [PATCH v2 02/19] clk: imx6q: add ethernet refclock mux support Oleksij Rempel
2023-01-29 17:34 ` Abel Vesa
2023-01-17 6:14 ` [PATCH v2 03/19] ARM: imx6q: skip ethernet refclock reconfiguration if enet_clk_ref is present Oleksij Rempel
2023-01-17 6:14 ` [PATCH v2 04/19] ARM: dts: imx6qdl: use enet_clk_ref instead of enet_out for the FEC node Oleksij Rempel
2023-01-17 6:14 ` [PATCH v2 05/19] ARM: dts: imx6dl-lanmcu: configure ethernet reference clock parent Oleksij Rempel
2023-01-17 6:14 ` Oleksij Rempel [this message]
2023-01-17 6:14 ` [PATCH v2 07/19] ARM: dts: imx6dl-plybas: " Oleksij Rempel
2023-01-17 6:14 ` [PATCH v2 08/19] ARM: dts: imx6dl-plym2m: " Oleksij Rempel
2023-01-17 6:14 ` [PATCH v2 09/19] ARM: dts: imx6dl-prtmvt: " Oleksij Rempel
2023-01-17 6:14 ` [PATCH v2 10/19] ARM: dts: imx6dl-victgo: " Oleksij Rempel
2023-01-17 6:14 ` [PATCH v2 11/19] ARM: dts: imx6q-prtwd2: " Oleksij Rempel
2023-01-17 6:14 ` [PATCH v2 12/19] ARM: dts: imx6qdl-skov-cpu: " Oleksij Rempel
2023-01-17 6:14 ` [PATCH v2 13/19] ARM: dts: imx6dl-eckelmann-ci4x10: " Oleksij Rempel
2023-01-17 6:14 ` [PATCH v2 14/19] clk: imx: add imx_obtain_fixed_of_clock() Oleksij Rempel
2023-01-29 17:33 ` Abel Vesa
2023-01-17 6:14 ` [PATCH v2 15/19] clk: imx6ul: fix enet1 gate configuration Oleksij Rempel
2023-01-29 17:32 ` Abel Vesa
2023-01-30 12:15 ` Oleksij Rempel
2023-01-30 14:54 ` Abel Vesa
2023-01-17 6:14 ` [PATCH v2 16/19] clk: imx6ul: add ethernet refclock mux support Oleksij Rempel
2023-01-30 22:05 ` Abel Vesa
2023-01-17 6:14 ` [PATCH v2 17/19] ARM: dts: imx6ul: set enet_clk_ref to CLK_ENETx_REF_SEL Oleksij Rempel
2023-01-17 6:14 ` [PATCH v2 18/19] ARM: mach-imx: imx6ul: remove not optional ethernet refclock overwrite Oleksij Rempel
2023-01-17 6:14 ` [PATCH v2 19/19] ARM: dts: imx6ul-prti6g: configure ethernet reference clock parent Oleksij Rempel
2023-01-30 22:11 ` [PATCH v2 00/19] ARM: imx: make Ethernet refclock configurable Abel Vesa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230117061453.3723649-7-o.rempel@pengutronix.de \
--to=o.rempel@pengutronix.de \
--cc=abelvesa@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mturquette@baylibre.com \
--cc=netdev@vger.kernel.org \
--cc=richardcochran@gmail.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=sboyd@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).