From: Herve Codina <herve.codina@bootlin.com>
To: Herve Codina <herve.codina@bootlin.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Linus Walleij <linus.walleij@linaro.org>,
Bartosz Golaszewski <brgl@bgdev.pl>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>
Cc: alsa-devel@alsa-project.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org,
Christophe Leroy <christophe.leroy@csgroup.eu>,
Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Subject: [PATCH v3 0/3] Add the Renesas IDT821034 codec support
Date: Thu, 26 Jan 2023 09:51:34 +0100 [thread overview]
Message-ID: <20230126085137.375814-1-herve.codina@bootlin.com> (raw)
Hi,
The Renesas IDT821034 codec is four channel PCM codec with on-chip
filters and programmable gain setting.
It also provides SLIC (Subscriber Line Interface Circuit) signals as
GPIOs.
Based on previous iteration,
https://lore.kernel.org/linux-kernel/20230120095036.514639-1-herve.codina@bootlin.com/
this v3 series mainly:
- Fixes _put() methods
- Introduces and uses idt821034_2x8bit_write()
- Removes the '#if IS_ENABLED(CONFIG_GPIOLIB)' conditional
Best regards,
Herve Codina
Changes v2 -> v3:
- Patch 1
Fix the example node name.
Add 'Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>'
- Patch 2
Fix _put() methods return code.
Remove 'select REGMAP_SPI' from Kconfig
Introduce and use idt821034_2x8bit_write()
Remove the '#if IS_ENABLED(CONFIG_GPIOLIB)' conditional
Fix comments and other minor code simplifications
Changes v1 -> v2:
- All patches
Reformat commit log
- Patch 1
Remove '$ref: /schemas/gpio/gpio.yaml#'
Use 'unevaluatedProperties: false'
Update the node name and remove the sound node in the example
- Patch 2
Change the file header comment format
Rework in order to remove the regmap virtual registers
Herve Codina (3):
dt-bindings: sound: Add Renesas IDT821034 codec
ASoC: codecs: Add support for the Renesas IDT821034 codec
MAINTAINERS: add the Renesas IDT821034 codec entry
.../bindings/sound/renesas,idt821034.yaml | 75 ++
MAINTAINERS | 7 +
sound/soc/codecs/Kconfig | 11 +
sound/soc/codecs/Makefile | 2 +
sound/soc/codecs/idt821034.c | 1180 +++++++++++++++++
5 files changed, 1275 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/renesas,idt821034.yaml
create mode 100644 sound/soc/codecs/idt821034.c
--
2.39.0
next reply other threads:[~2023-01-26 8:52 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-26 8:51 Herve Codina [this message]
2023-01-26 8:51 ` [PATCH v3 1/3] dt-bindings: sound: Add Renesas IDT821034 codec Herve Codina
2023-01-26 8:51 ` [PATCH v3 2/3] ASoC: codecs: Add support for the " Herve Codina
2023-01-26 8:51 ` [PATCH v3 3/3] MAINTAINERS: add the Renesas IDT821034 codec entry Herve Codina
2023-01-31 14:32 ` [PATCH v3 0/3] Add the Renesas IDT821034 codec support Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230126085137.375814-1-herve.codina@bootlin.com \
--to=herve.codina@bootlin.com \
--cc=alsa-devel@alsa-project.org \
--cc=brgl@bgdev.pl \
--cc=broonie@kernel.org \
--cc=christophe.leroy@csgroup.eu \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=perex@perex.cz \
--cc=robh+dt@kernel.org \
--cc=thomas.petazzoni@bootlin.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).