linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Hal Feng <hal.feng@starfivetech.com>
To: <linux-gpio@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-riscv@lists.infradead.org>
Cc: Linus Walleij <linus.walleij@linaro.org>,
	Andreas Schwab <schwab@suse.de>, Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor@kernel.org>,
	"Palmer Dabbelt" <palmer@dabbelt.com>,
	Emil Renner Berthing <emil.renner.berthing@canonical.com>,
	Jianlong Huang <jianlong.huang@starfivetech.com>,
	Hal Feng <hal.feng@starfivetech.com>,
	<linux-kernel@vger.kernel.org>
Subject: [PATCH v5 0/4] Basic pinctrl support for StarFive JH7110 RISC-V SoC
Date: Thu, 9 Feb 2023 22:36:58 +0800	[thread overview]
Message-ID: <20230209143702.44408-1-hal.feng@starfivetech.com> (raw)

This patch series adds basic pinctrl support for StarFive JH7110 SoC.

Changes since v4:
Patch 1 & 2:
- Added pinmux-node.yaml reference for '-pins$' patternProperties.
- Dropped reference for pinmux properties.

  v4: https://lore.kernel.org/all/20230203141801.59083-1-hal.feng@starfivetech.com/

Changes since v3:
- Rebased on Linus's "devel" branch of linux-pinctrl repo, which was based on
  on tag v6.2-rc1.
- Dropped patch 1.
Patch 2 & 3:
- Added a reference for '-pins$' patternProperties.
- Put "additionalProperties: false" before properties section. (by Rob)
- Improved the description.
- Changed the node name in examples from "gpio" to "pinctrl".
Patch 4:
- Added some missing headers. (by Andreas)

  v3: https://lore.kernel.org/all/20221220005529.34744-1-hal.feng@starfivetech.com/

Changes since v2:
- Rebased on tag v6.1.
Patch 1:
- Renamed pinctrl-starfive-jh7110.h to
  starfive,jh7110-pinctrl.h. (by Krzysztof)
- Separated the register values in the binding header and stored them in
  a new file arch/riscv/boot/dts/starfive/jh7110-pinfunc.h. (by Krzysztof)
- Split patch 1 into sys part and aon part. Merged them into patch 2
  and patch 3 respectively.
Patch 2 & 3:
- Dropped "reg-names" and the description of "interrupts". Dropped quotes
  behind "$ref" and kept consisitent quotes. (by Krzysztof)
- Moved gpio properties behind interrupt properties.
- Moved "required" behind "patternProperties". (by Krzysztof)
- Rewrote the examples of bindings. (by Krzysztof and Emil)
- Added Co-developed-by tag for Emil.
- Dropped unused "clocks" property in patch 3.
Patch 4 & 5:
- Renamed "pinctrl-starfive.*" to "pinctrl-starfive-jh7110.*" and replaced
  all "starfive_" prefix with "jh7110_" in these files. (by Emil)
- Dropped macro GPIO_NUM_PER_WORD. (by Emil)
- Dropped unused flag member in starfive_pinctrl_soc_info structure. (by Emil)
- Renamed "pinctrl-jh7110-sys.c" to "pinctrl-starfive-jh7110-sys.c".
  Renamed "pinctrl-jh7110-aon.c" to "pinctrl-starfive-jh7110-aon.c". (by Emil)
- Added individual Kconfig options for sys and aon pinctrl drivers. (by Emil)
- Made the sys and aon pinctrl drivers be modules. (by Emil)
- Added "JH7110_" prefix for macro SYS_GPO_PDA_0_74_CFG,
  SYS_GPO_PDA_89_94_CFG and AON_GPO_PDA_0_5_CFG. (by Emil)
- Dropped jh7110_sys_pinctrl_probe() and jh7110_aon_pinctrl_probe().
  Got the match data in the common jh7110_pinctrl_probe() and used it
  to probe. (by Emil)
- Dropped the of_match_ptr macro(). (by Emil)
- Set the MODULE_LICENSE as "GPL" according to commit bf7fbeeae6db.

  v2: https://lore.kernel.org/all/20221118011108.70715-1-hal.feng@starfivetech.com/

Changes since v1:
- Rebased on tag v6.1-rc5.
- Dropped patch 22 and 23 since they were merged in v6.1-rc1.
- Removed some unused macros and register values which do not belong to
  bindings. Simplified pinctrl definitions in patch 24. (by Krzysztof)
- Split the bindings into sys pinctrl bindings and aon pinctrl bindings,
  and split patch 25 into two patches.
- Made the bindings follow generic pinctrl bindings. (by Krzysztof)
- Fixed some wrong indentation in bindings, and checked it with
  `make dt_binding_check`.
- Split the patch 26 into two patches which added sys and aon pinctrl
  driver respectively.
- Restructured the pinctrl drivers so made them follow generic pinctrl
  bindings. Rewrote `dt_node_to_map` and extracted the public code to make
  it clearer.

  v1: https://lore.kernel.org/all/20220929143225.17907-1-hal.feng@linux.starfivetech.com/

Jianlong Huang (4):
  dt-bindings: pinctrl: Add StarFive JH7110 sys pinctrl
  dt-bindings: pinctrl: Add StarFive JH7110 aon pinctrl
  pinctrl: starfive: Add StarFive JH7110 sys controller driver
  pinctrl: starfive: Add StarFive JH7110 aon controller driver

 .../pinctrl/starfive,jh7110-aon-pinctrl.yaml  | 124 +++
 .../pinctrl/starfive,jh7110-sys-pinctrl.yaml  | 142 +++
 MAINTAINERS                                   |   8 +-
 drivers/pinctrl/starfive/Kconfig              |  33 +
 drivers/pinctrl/starfive/Makefile             |   4 +
 .../starfive/pinctrl-starfive-jh7110-aon.c    | 177 ++++
 .../starfive/pinctrl-starfive-jh7110-sys.c    | 449 ++++++++
 .../starfive/pinctrl-starfive-jh7110.c        | 982 ++++++++++++++++++
 .../starfive/pinctrl-starfive-jh7110.h        |  70 ++
 .../pinctrl/starfive,jh7110-pinctrl.h         | 137 +++
 10 files changed, 2123 insertions(+), 3 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/starfive,jh7110-aon-pinctrl.yaml
 create mode 100644 Documentation/devicetree/bindings/pinctrl/starfive,jh7110-sys-pinctrl.yaml
 create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive-jh7110-aon.c
 create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive-jh7110-sys.c
 create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive-jh7110.c
 create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive-jh7110.h
 create mode 100644 include/dt-bindings/pinctrl/starfive,jh7110-pinctrl.h

-- 
2.38.1


             reply	other threads:[~2023-02-09 14:37 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-02-09 14:36 Hal Feng [this message]
2023-02-09 14:36 ` [PATCH v5 1/4] dt-bindings: pinctrl: Add StarFive JH7110 sys pinctrl Hal Feng
2023-02-09 14:37 ` [PATCH v5 2/4] dt-bindings: pinctrl: Add StarFive JH7110 aon pinctrl Hal Feng
2023-02-09 14:37 ` [PATCH v5 3/4] pinctrl: starfive: Add StarFive JH7110 sys controller driver Hal Feng
2023-02-09 14:37 ` [PATCH v5 4/4] pinctrl: starfive: Add StarFive JH7110 aon " Hal Feng
2023-02-10 22:45 ` [PATCH v5 0/4] Basic pinctrl support for StarFive JH7110 RISC-V SoC Linus Walleij
2023-02-11  8:24   ` Hal Feng
2023-02-20 10:15     ` Emil Renner Berthing
2023-03-06 13:43       ` Linus Walleij

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230209143702.44408-1-hal.feng@starfivetech.com \
    --to=hal.feng@starfivetech.com \
    --cc=conor@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=emil.renner.berthing@canonical.com \
    --cc=jianlong.huang@starfivetech.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=palmer@dabbelt.com \
    --cc=robh+dt@kernel.org \
    --cc=schwab@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).