linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>,
	Chris Chiu <chris.chiu@canonical.com>,
	Bjorn Helgaas <bhelgaas@google.com>,
	Sasha Levin <sashal@kernel.org>,
	linux-pci@vger.kernel.org
Subject: [PATCH AUTOSEL 6.1 45/60] PCI: Distribute available resources for root buses, too
Date: Fri,  3 Mar 2023 16:42:59 -0500	[thread overview]
Message-ID: <20230303214315.1447666-45-sashal@kernel.org> (raw)
In-Reply-To: <20230303214315.1447666-1-sashal@kernel.org>

From: Mika Westerberg <mika.westerberg@linux.intel.com>

[ Upstream commit 7180c1d08639f28e63110ad35815f7a1785b8a19 ]

Previously we distributed spare resources only upon hot-add, so if the
initial root bus scan found devices that had not been fully configured by
the BIOS, we allocated only enough resources to cover what was then
present. If some of those devices were hotplug bridges, we did not leave
any additional resource space for future expansion.

Distribute the available resources for root buses, too, to make this work
the same way as the normal hotplug case.

A previous commit to do this was reverted due to a regression reported by
Jonathan Cameron:

  e96e27fc6f79 ("PCI: Distribute available resources for root buses, too")
  5632e2beaf9d ("Revert "PCI: Distribute available resources for root buses, too"")

This commit changes pci_bridge_resources_not_assigned() to work with
bridges that do not have all the resource windows programmed by the boot
firmware (previously we expected all I/O, memory and prefetchable memory
were programmed).

Link: https://bugzilla.kernel.org/show_bug.cgi?id=216000
Link: https://lore.kernel.org/r/20220905080232.36087-5-mika.westerberg@linux.intel.com
Link: https://lore.kernel.org/r/20230131092405.29121-4-mika.westerberg@linux.intel.com
Reported-by: Chris Chiu <chris.chiu@canonical.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/setup-bus.c | 57 ++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 56 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index b7b8dddb77722..c690572b10ce7 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -1770,7 +1770,10 @@ static void adjust_bridge_window(struct pci_dev *bridge, struct resource *res,
 	}
 
 	res->end = res->start + new_size - 1;
-	remove_from_list(add_list, res);
+
+	/* If the resource is part of the add_list, remove it now */
+	if (add_list)
+		remove_from_list(add_list, res);
 }
 
 static void remove_dev_resource(struct resource *avail, struct pci_dev *dev,
@@ -1972,6 +1975,8 @@ static void pci_bridge_distribute_available_resources(struct pci_dev *bridge,
 	if (!bridge->is_hotplug_bridge)
 		return;
 
+	pci_dbg(bridge, "distributing available resources\n");
+
 	/* Take the initial extra resources from the hotplug port */
 	available_io = bridge->resource[PCI_BRIDGE_IO_WINDOW];
 	available_mmio = bridge->resource[PCI_BRIDGE_MEM_WINDOW];
@@ -1983,6 +1988,54 @@ static void pci_bridge_distribute_available_resources(struct pci_dev *bridge,
 					       available_mmio_pref);
 }
 
+static bool pci_bridge_resources_not_assigned(struct pci_dev *dev)
+{
+	const struct resource *r;
+
+	/*
+	 * If the child device's resources are not yet assigned it means we
+	 * are configuring them (not the boot firmware), so we should be
+	 * able to extend the upstream bridge resources in the same way we
+	 * do with the normal hotplug case.
+	 */
+	r = &dev->resource[PCI_BRIDGE_IO_WINDOW];
+	if (r->flags && !(r->flags & IORESOURCE_STARTALIGN))
+		return false;
+	r = &dev->resource[PCI_BRIDGE_MEM_WINDOW];
+	if (r->flags && !(r->flags & IORESOURCE_STARTALIGN))
+		return false;
+	r = &dev->resource[PCI_BRIDGE_PREF_MEM_WINDOW];
+	if (r->flags && !(r->flags & IORESOURCE_STARTALIGN))
+		return false;
+
+	return true;
+}
+
+static void
+pci_root_bus_distribute_available_resources(struct pci_bus *bus,
+					    struct list_head *add_list)
+{
+	struct pci_dev *dev, *bridge = bus->self;
+
+	for_each_pci_bridge(dev, bus) {
+		struct pci_bus *b;
+
+		b = dev->subordinate;
+		if (!b)
+			continue;
+
+		/*
+		 * Need to check "bridge" here too because it is NULL
+		 * in case of root bus.
+		 */
+		if (bridge && pci_bridge_resources_not_assigned(dev))
+			pci_bridge_distribute_available_resources(bridge,
+								  add_list);
+		else
+			pci_root_bus_distribute_available_resources(b, add_list);
+	}
+}
+
 /*
  * First try will not touch PCI bridge res.
  * Second and later try will clear small leaf bridge res.
@@ -2022,6 +2075,8 @@ void pci_assign_unassigned_root_bus_resources(struct pci_bus *bus)
 	 */
 	__pci_bus_size_bridges(bus, add_list);
 
+	pci_root_bus_distribute_available_resources(bus, add_list);
+
 	/* Depth last, allocate resources and update the hardware. */
 	__pci_bus_assign_resources(bus, add_list, &fail_head);
 	if (add_list)
-- 
2.39.2


  parent reply	other threads:[~2023-03-03 21:52 UTC|newest]

Thread overview: 60+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-03-03 21:42 [PATCH AUTOSEL 6.1 01/60] IB/hfi1: Update RMT size calculation Sasha Levin
2023-03-03 21:42 ` [PATCH AUTOSEL 6.1 02/60] iommu/amd: Fix error handling for pdev_pri_ats_enable() Sasha Levin
2023-03-03 21:42 ` [PATCH AUTOSEL 6.1 03/60] PCI/ACPI: Account for _S0W of the target bridge in acpi_pci_bridge_d3() Sasha Levin
2023-03-03 21:42 ` [PATCH AUTOSEL 6.1 04/60] media: uvcvideo: Remove format descriptions Sasha Levin
2023-03-03 21:42 ` [PATCH AUTOSEL 6.1 05/60] media: uvcvideo: Handle cameras with invalid descriptors Sasha Levin
2023-03-03 21:42 ` [PATCH AUTOSEL 6.1 06/60] media: uvcvideo: Handle errors from calls to usb_string Sasha Levin
2023-03-03 21:42 ` [PATCH AUTOSEL 6.1 07/60] media: uvcvideo: Quirk for autosuspend in Logitech B910 and C910 Sasha Levin
2023-03-03 21:42 ` [PATCH AUTOSEL 6.1 08/60] media: uvcvideo: Silence memcpy() run-time false positive warnings Sasha Levin
2023-03-03 21:42 ` [PATCH AUTOSEL 6.1 09/60] USB: fix memory leak with using debugfs_lookup() Sasha Levin
2023-03-03 21:42 ` [PATCH AUTOSEL 6.1 10/60] cacheinfo: Fix shared_cpu_map to handle shared caches at different levels Sasha Levin
2023-03-03 21:42 ` [PATCH AUTOSEL 6.1 11/60] staging: emxx_udc: Add checks for dma_alloc_coherent() Sasha Levin
2023-03-03 21:42 ` [PATCH AUTOSEL 6.1 12/60] tty: fix out-of-bounds access in tty_driver_lookup_tty() Sasha Levin
2023-03-03 21:42 ` [PATCH AUTOSEL 6.1 13/60] tty: serial: fsl_lpuart: disable the CTS when send break signal Sasha Levin
2023-03-03 21:42 ` [PATCH AUTOSEL 6.1 14/60] serial: sc16is7xx: setup GPIO controller later in probe Sasha Levin
2023-03-03 21:42 ` [PATCH AUTOSEL 6.1 15/60] mei: bus-fixup:upon error print return values of send and receive Sasha Levin
2023-03-03 21:42 ` [PATCH AUTOSEL 6.1 16/60] parport_pc: Set up mode and ECR masks for Oxford Semiconductor devices Sasha Levin
2023-03-03 21:42 ` [PATCH AUTOSEL 6.1 17/60] tools/iio/iio_utils:fix memory leak Sasha Levin
2023-03-03 21:42 ` [PATCH AUTOSEL 6.1 18/60] bus: mhi: ep: Fix the debug message for MHI_PKT_TYPE_RESET_CHAN_CMD cmd Sasha Levin
2023-03-03 21:42 ` [PATCH AUTOSEL 6.1 19/60] iio: accel: mma9551_core: Prevent uninitialized variable in mma9551_read_status_word() Sasha Levin
2023-03-03 21:42 ` [PATCH AUTOSEL 6.1 20/60] iio: accel: mma9551_core: Prevent uninitialized variable in mma9551_read_config_word() Sasha Levin
2023-03-03 21:42 ` [PATCH AUTOSEL 6.1 21/60] media: uvcvideo: Add GUID for BGRA/X 8:8:8:8 Sasha Levin
2023-03-03 21:42 ` [PATCH AUTOSEL 6.1 22/60] firmware: coreboot: framebuffer: Ignore reserved pixel color bits Sasha Levin
2023-03-03 21:42 ` [PATCH AUTOSEL 6.1 23/60] soundwire: bus_type: Avoid lockdep assert in sdw_drv_probe() Sasha Levin
2023-03-03 21:42 ` [PATCH AUTOSEL 6.1 24/60] PCI: loongson: Prevent LS7A MRRS increases Sasha Levin
2023-03-03 21:42 ` [PATCH AUTOSEL 6.1 25/60] staging: pi433: fix memory leak with using debugfs_lookup() Sasha Levin
2023-03-03 21:42 ` [PATCH AUTOSEL 6.1 26/60] USB: dwc3: " Sasha Levin
2023-03-03 21:42 ` [PATCH AUTOSEL 6.1 27/60] USB: chipidea: " Sasha Levin
2023-03-03 21:42 ` [PATCH AUTOSEL 6.1 28/60] USB: ULPI: " Sasha Levin
2023-03-03 21:42 ` [PATCH AUTOSEL 6.1 29/60] USB: uhci: " Sasha Levin
2023-03-03 21:42 ` [PATCH AUTOSEL 6.1 30/60] USB: sl811: " Sasha Levin
2023-03-03 21:42 ` [PATCH AUTOSEL 6.1 31/60] USB: fotg210: " Sasha Levin
2023-03-03 21:42 ` [PATCH AUTOSEL 6.1 32/60] USB: isp116x: " Sasha Levin
2023-03-03 21:42 ` [PATCH AUTOSEL 6.1 33/60] USB: isp1362: " Sasha Levin
2023-03-03 21:42 ` [PATCH AUTOSEL 6.1 34/60] USB: gadget: gr_udc: " Sasha Levin
2023-03-03 21:42 ` [PATCH AUTOSEL 6.1 35/60] USB: gadget: bcm63xx_udc: " Sasha Levin
2023-03-03 21:42 ` [PATCH AUTOSEL 6.1 36/60] USB: gadget: lpc32xx_udc: " Sasha Levin
2023-03-03 21:42 ` [PATCH AUTOSEL 6.1 37/60] USB: gadget: pxa25x_udc: " Sasha Levin
2023-03-03 21:42 ` [PATCH AUTOSEL 6.1 38/60] USB: gadget: pxa27x_udc: " Sasha Levin
2023-03-03 21:42 ` [PATCH AUTOSEL 6.1 39/60] usb: host: xhci: mvebu: Iterate over array indexes instead of using pointer math Sasha Levin
2023-03-03 21:42 ` [PATCH AUTOSEL 6.1 40/60] USB: ene_usb6250: Allocate enough memory for full object Sasha Levin
2023-03-03 21:42 ` [PATCH AUTOSEL 6.1 41/60] usb: uvc: Enumerate valid values for color matching Sasha Levin
2023-03-03 21:42 ` [PATCH AUTOSEL 6.1 42/60] usb: gadget: uvc: Make bSourceID read/write Sasha Levin
2023-03-03 21:42 ` [PATCH AUTOSEL 6.1 43/60] PCI: Align extra resources for hotplug bridges properly Sasha Levin
2023-03-03 21:42 ` [PATCH AUTOSEL 6.1 44/60] PCI: Take other bus devices into account when distributing resources Sasha Levin
2023-03-03 21:42 ` Sasha Levin [this message]
2023-03-03 21:43 ` [PATCH AUTOSEL 6.1 46/60] tty: pcn_uart: fix memory leak with using debugfs_lookup() Sasha Levin
2023-03-03 21:43 ` [PATCH AUTOSEL 6.1 47/60] misc: vmw_balloon: " Sasha Levin
2023-03-03 21:43 ` [PATCH AUTOSEL 6.1 48/60] drivers: base: component: " Sasha Levin
2023-03-03 21:43 ` [PATCH AUTOSEL 6.1 49/60] drivers: base: dd: " Sasha Levin
2023-03-03 21:43 ` [PATCH AUTOSEL 6.1 50/60] kernel/time/test_udelay.c: " Sasha Levin
2023-03-03 21:43 ` [PATCH AUTOSEL 6.1 51/60] kernel/power/energy_model.c: " Sasha Levin
2023-03-03 21:43 ` [PATCH AUTOSEL 6.1 52/60] kernel/fail_function: " Sasha Levin
2023-03-03 21:43 ` [PATCH AUTOSEL 6.1 53/60] PCI: loongson: Add more devices that need MRRS quirk Sasha Levin
2023-03-03 21:43 ` [PATCH AUTOSEL 6.1 54/60] PCI: Add ACS quirk for Wangxun NICs Sasha Levin
2023-03-03 21:43 ` [PATCH AUTOSEL 6.1 55/60] PCI: pciehp: Add Qualcomm quirk for Command Completed erratum Sasha Levin
2023-03-03 21:43 ` [PATCH AUTOSEL 6.1 56/60] phy: rockchip-typec: Fix unsigned comparison with less than zero Sasha Levin
2023-03-03 21:43 ` [PATCH AUTOSEL 6.1 57/60] RDMA/cma: Distinguish between sockaddr_in and sockaddr_in6 by size Sasha Levin
2023-03-03 21:43 ` [PATCH AUTOSEL 6.1 58/60] iommu: Attach device group to old domain in error path Sasha Levin
2023-03-03 21:43 ` [PATCH AUTOSEL 6.1 59/60] soundwire: cadence: Remove wasted space in response_buf Sasha Levin
2023-03-03 21:43 ` [PATCH AUTOSEL 6.1 60/60] soundwire: cadence: Drain the RX FIFO after an IO timeout Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230303214315.1447666-45-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=bhelgaas@google.com \
    --cc=chris.chiu@canonical.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=mika.westerberg@linux.intel.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).