From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Ricardo Ribalda <ribalda@chromium.org>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Sasha Levin <sashal@kernel.org>,
mchehab@kernel.org, linux-media@vger.kernel.org
Subject: [PATCH AUTOSEL 5.10 05/30] media: uvcvideo: Quirk for autosuspend in Logitech B910 and C910
Date: Fri, 3 Mar 2023 16:46:50 -0500 [thread overview]
Message-ID: <20230303214715.1452256-5-sashal@kernel.org> (raw)
In-Reply-To: <20230303214715.1452256-1-sashal@kernel.org>
From: Ricardo Ribalda <ribalda@chromium.org>
[ Upstream commit 136effa754b57632f99574fc4a3433e0cfc031d9 ]
Logitech B910 and C910 firmware are unable to recover from a USB
autosuspend. When it resumes, the device is in a state where it only
produces invalid frames. Eg:
$ echo 0xFFFF > /sys/module/uvcvideo/parameters/trace # enable verbose log
$ yavta -c1 -n1 --file='frame#.jpg' --format MJPEG --size=1920x1080 /dev/video1
[350438.435219] uvcvideo: uvc_v4l2_open
[350438.529794] uvcvideo: Resuming interface 2
[350438.529801] uvcvideo: Resuming interface 3
[350438.529991] uvcvideo: Trying format 0x47504a4d (MJPG): 1920x1080.
[350438.529996] uvcvideo: Using default frame interval 33333.3 us (30.0 fps).
[350438.551496] uvcvideo: uvc_v4l2_mmap
[350438.555890] uvcvideo: Device requested 3060 B/frame bandwidth.
[350438.555896] uvcvideo: Selecting alternate setting 11 (3060 B/frame bandwidth).
[350438.556362] uvcvideo: Allocated 5 URB buffers of 32x3060 bytes each.
[350439.316468] uvcvideo: Marking buffer as bad (error bit set).
[350439.316475] uvcvideo: Frame complete (EOF found).
[350439.316477] uvcvideo: EOF in empty payload.
[350439.316484] uvcvideo: frame 1 stats: 149/261/417 packets, 1/149/417 pts (early initial), 416/417 scr, last pts/stc/sof 2976325734/2978107243/249
[350439.384510] uvcvideo: Marking buffer as bad (error bit set).
[350439.384516] uvcvideo: Frame complete (EOF found).
[350439.384518] uvcvideo: EOF in empty payload.
[350439.384525] uvcvideo: frame 2 stats: 265/379/533 packets, 1/265/533 pts (early initial), 532/533 scr, last pts/stc/sof 2979524454/2981305193/316
[350439.448472] uvcvideo: Marking buffer as bad (error bit set).
[350439.448478] uvcvideo: Frame complete (EOF found).
[350439.448480] uvcvideo: EOF in empty payload.
[350439.448487] uvcvideo: frame 3 stats: 265/377/533 packets, 1/265/533 pts (early initial), 532/533 scr, last pts/stc/sof 2982723174/2984503144/382
...(loop)...
The devices can leave this invalid state if the alternate setting of
the streaming interface is toggled.
This patch adds a quirk for this device so it can be autosuspended
properly.
lsusb -v:
Bus 001 Device 049: ID 046d:0821 Logitech, Inc. HD Webcam C910
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
idVendor 0x046d Logitech, Inc.
idProduct 0x0821 HD Webcam C910
bcdDevice 0.10
iManufacturer 0
iProduct 0
iSerial 1 390022B0
bNumConfigurations 1
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/usb/uvc/uvc_driver.c | 18 ++++++++++++++++++
drivers/media/usb/uvc/uvc_video.c | 11 +++++++++++
drivers/media/usb/uvc/uvcvideo.h | 1 +
3 files changed, 30 insertions(+)
diff --git a/drivers/media/usb/uvc/uvc_driver.c b/drivers/media/usb/uvc/uvc_driver.c
index 2be18fa7982d7..6334f99f1854d 100644
--- a/drivers/media/usb/uvc/uvc_driver.c
+++ b/drivers/media/usb/uvc/uvc_driver.c
@@ -2555,6 +2555,24 @@ static const struct usb_device_id uvc_ids[] = {
.bInterfaceSubClass = 1,
.bInterfaceProtocol = 0,
.driver_info = (kernel_ulong_t)&uvc_quirk_probe_minmax },
+ /* Logitech, Webcam C910 */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x046d,
+ .idProduct = 0x0821,
+ .bInterfaceClass = USB_CLASS_VIDEO,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0,
+ .driver_info = UVC_INFO_QUIRK(UVC_QUIRK_WAKE_AUTOSUSPEND)},
+ /* Logitech, Webcam B910 */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x046d,
+ .idProduct = 0x0823,
+ .bInterfaceClass = USB_CLASS_VIDEO,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0,
+ .driver_info = UVC_INFO_QUIRK(UVC_QUIRK_WAKE_AUTOSUSPEND)},
/* Logitech Quickcam Fusion */
{ .match_flags = USB_DEVICE_ID_MATCH_DEVICE
| USB_DEVICE_ID_MATCH_INT_INFO,
diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c
index f6373d678d256..d5a4e967883c5 100644
--- a/drivers/media/usb/uvc/uvc_video.c
+++ b/drivers/media/usb/uvc/uvc_video.c
@@ -1903,6 +1903,17 @@ static int uvc_video_start_transfer(struct uvc_streaming *stream,
uvc_trace(UVC_TRACE_VIDEO, "Selecting alternate setting %u "
"(%u B/frame bandwidth).\n", altsetting, best_psize);
+ /*
+ * Some devices, namely the Logitech C910 and B910, are unable
+ * to recover from a USB autosuspend, unless the alternate
+ * setting of the streaming interface is toggled.
+ */
+ if (stream->dev->quirks & UVC_QUIRK_WAKE_AUTOSUSPEND) {
+ usb_set_interface(stream->dev->udev, intfnum,
+ altsetting);
+ usb_set_interface(stream->dev->udev, intfnum, 0);
+ }
+
ret = usb_set_interface(stream->dev->udev, intfnum, altsetting);
if (ret < 0)
return ret;
diff --git a/drivers/media/usb/uvc/uvcvideo.h b/drivers/media/usb/uvc/uvcvideo.h
index c884020b28784..284200becbbdb 100644
--- a/drivers/media/usb/uvc/uvcvideo.h
+++ b/drivers/media/usb/uvc/uvcvideo.h
@@ -203,6 +203,7 @@
#define UVC_QUIRK_RESTORE_CTRLS_ON_INIT 0x00000400
#define UVC_QUIRK_FORCE_Y8 0x00000800
#define UVC_QUIRK_FORCE_BPP 0x00001000
+#define UVC_QUIRK_WAKE_AUTOSUSPEND 0x00002000
/* Format flags */
#define UVC_FMT_FLAG_COMPRESSED 0x00000001
--
2.39.2
next prev parent reply other threads:[~2023-03-03 21:54 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-03 21:46 [PATCH AUTOSEL 5.10 01/30] IB/hfi1: Update RMT size calculation Sasha Levin
2023-03-03 21:46 ` [PATCH AUTOSEL 5.10 02/30] iommu/amd: Fix error handling for pdev_pri_ats_enable() Sasha Levin
2023-03-03 21:46 ` [PATCH AUTOSEL 5.10 03/30] media: uvcvideo: Handle cameras with invalid descriptors Sasha Levin
2023-03-03 21:46 ` [PATCH AUTOSEL 5.10 04/30] media: uvcvideo: Handle errors from calls to usb_string Sasha Levin
2023-03-03 21:46 ` Sasha Levin [this message]
2023-03-03 21:46 ` [PATCH AUTOSEL 5.10 06/30] media: uvcvideo: Silence memcpy() run-time false positive warnings Sasha Levin
2023-03-03 21:46 ` [PATCH AUTOSEL 5.10 07/30] staging: emxx_udc: Add checks for dma_alloc_coherent() Sasha Levin
2023-03-03 21:46 ` [PATCH AUTOSEL 5.10 08/30] tty: fix out-of-bounds access in tty_driver_lookup_tty() Sasha Levin
2023-03-03 21:46 ` [PATCH AUTOSEL 5.10 09/30] tty: serial: fsl_lpuart: disable the CTS when send break signal Sasha Levin
2023-03-03 21:46 ` [PATCH AUTOSEL 5.10 10/30] serial: sc16is7xx: setup GPIO controller later in probe Sasha Levin
2023-03-03 21:46 ` [PATCH AUTOSEL 5.10 11/30] mei: bus-fixup:upon error print return values of send and receive Sasha Levin
2023-03-03 21:46 ` [PATCH AUTOSEL 5.10 12/30] parport_pc: Set up mode and ECR masks for Oxford Semiconductor devices Sasha Levin
2023-03-03 21:46 ` [PATCH AUTOSEL 5.10 13/30] tools/iio/iio_utils:fix memory leak Sasha Levin
2023-03-03 21:46 ` [PATCH AUTOSEL 5.10 14/30] iio: accel: mma9551_core: Prevent uninitialized variable in mma9551_read_status_word() Sasha Levin
2023-03-03 21:47 ` [PATCH AUTOSEL 5.10 15/30] iio: accel: mma9551_core: Prevent uninitialized variable in mma9551_read_config_word() Sasha Levin
2023-03-03 21:47 ` [PATCH AUTOSEL 5.10 16/30] firmware: coreboot: framebuffer: Ignore reserved pixel color bits Sasha Levin
2023-03-03 21:47 ` [PATCH AUTOSEL 5.10 17/30] PCI: loongson: Prevent LS7A MRRS increases Sasha Levin
2023-03-03 21:47 ` [PATCH AUTOSEL 5.10 18/30] usb: host: xhci: mvebu: Iterate over array indexes instead of using pointer math Sasha Levin
2023-03-03 21:47 ` [PATCH AUTOSEL 5.10 19/30] USB: ene_usb6250: Allocate enough memory for full object Sasha Levin
2023-03-03 21:47 ` [PATCH AUTOSEL 5.10 20/30] usb: uvc: Enumerate valid values for color matching Sasha Levin
2023-03-03 21:47 ` [PATCH AUTOSEL 5.10 21/30] usb: gadget: uvc: Make bSourceID read/write Sasha Levin
2023-03-03 21:47 ` [PATCH AUTOSEL 5.10 22/30] PCI: Align extra resources for hotplug bridges properly Sasha Levin
2023-03-03 21:47 ` [PATCH AUTOSEL 5.10 23/30] PCI: Take other bus devices into account when distributing resources Sasha Levin
2023-03-03 21:47 ` [PATCH AUTOSEL 5.10 24/30] kernel/power/energy_model.c: fix memory leak with using debugfs_lookup() Sasha Levin
2023-03-03 21:47 ` [PATCH AUTOSEL 5.10 25/30] kernel/fail_function: " Sasha Levin
2023-03-03 21:47 ` [PATCH AUTOSEL 5.10 26/30] PCI: loongson: Add more devices that need MRRS quirk Sasha Levin
2023-03-03 21:47 ` [PATCH AUTOSEL 5.10 27/30] PCI: Add ACS quirk for Wangxun NICs Sasha Levin
2023-03-03 21:47 ` [PATCH AUTOSEL 5.10 28/30] phy: rockchip-typec: Fix unsigned comparison with less than zero Sasha Levin
2023-03-03 21:47 ` [PATCH AUTOSEL 5.10 29/30] soundwire: cadence: Remove wasted space in response_buf Sasha Levin
2023-03-03 21:47 ` [PATCH AUTOSEL 5.10 30/30] soundwire: cadence: Drain the RX FIFO after an IO timeout Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230303214715.1452256-5-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=ribalda@chromium.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).