From: Niklas Schnelle <schnelle@linux.ibm.com>
To: Arnd Bergmann <arnd@arndb.de>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Mathias Nyman <mathias.nyman@intel.com>,
Alan Stern <stern@rowland.harvard.edu>
Cc: "Bjorn Helgaas" <bhelgaas@google.com>,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
"Mauro Carvalho Chehab" <mchehab@kernel.org>,
"Rafael J. Wysocki" <rafael@kernel.org>,
"Geert Uytterhoeven" <geert@linux-m68k.org>,
"Paul Walmsley" <paul.walmsley@sifive.com>,
"Palmer Dabbelt" <palmer@dabbelt.com>,
"Albert Ou" <aou@eecs.berkeley.edu>,
linux-kernel@vger.kernel.org, linux-arch@vger.kernel.org,
linux-pci@vger.kernel.org, "Arnd Bergmann" <arnd@kernel.org>,
linux-usb@vger.kernel.org
Subject: [PATCH v3 34/38] usb: handle HAS_IOPORT dependencies
Date: Tue, 14 Mar 2023 13:12:12 +0100 [thread overview]
Message-ID: <20230314121216.413434-35-schnelle@linux.ibm.com> (raw)
In-Reply-To: <20230314121216.413434-1-schnelle@linux.ibm.com>
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to guard sections of code calling them
as alternative access methods with CONFIG_HAS_IOPORT checks. Similarly
drivers requiring these functions need to depend on HAS_IOPORT.
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
---
drivers/usb/core/hcd-pci.c | 2 +
drivers/usb/host/Kconfig | 4 +-
drivers/usb/host/pci-quirks.c | 125 ++++++++++++++++++----------------
drivers/usb/host/pci-quirks.h | 31 ++++++---
drivers/usb/host/uhci-hcd.c | 2 +-
drivers/usb/host/uhci-hcd.h | 36 ++++++----
6 files changed, 117 insertions(+), 83 deletions(-)
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index ab2f3737764e..f2e825ee3246 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -206,8 +206,10 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct hc_driver *driver)
goto free_irq_vectors;
}
+#ifdef CONFIG_USB_PCI_AMD
hcd->amd_resume_bug = (usb_hcd_amd_remote_wakeup_quirk(dev) &&
driver->flags & (HCD_USB11 | HCD_USB3)) ? 1 : 0;
+#endif
if (driver->flags & HCD_MEMORY) {
/* EHCI, OHCI */
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index eacb603ad1b2..73315ad28a75 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -376,7 +376,7 @@ config USB_ISP116X_HCD
config USB_ISP1362_HCD
tristate "ISP1362 HCD support"
- depends on HAS_IOMEM
+ depends on HAS_IOPORT
depends on COMPILE_TEST # nothing uses this
help
Supports the Philips ISP1362 chip as a host controller
@@ -578,7 +578,7 @@ endif # USB_OHCI_HCD
config USB_UHCI_HCD
tristate "UHCI HCD (most Intel and VIA) support"
- depends on USB_PCI || USB_UHCI_SUPPORT_NON_PCI_HC
+ depends on (USB_PCI && HAS_IOPORT) || USB_UHCI_SUPPORT_NON_PCI_HC
help
The Universal Host Controller Interface is a standard by Intel for
accessing the USB hardware in the PC (which is also called the USB
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index ef08d68b9714..98870f26b250 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -60,6 +60,23 @@
#define EHCI_USBLEGCTLSTS 4 /* legacy control/status */
#define EHCI_USBLEGCTLSTS_SOOE (1 << 13) /* SMI on ownership change */
+/* ASMEDIA quirk use */
+#define ASMT_DATA_WRITE0_REG 0xF8
+#define ASMT_DATA_WRITE1_REG 0xFC
+#define ASMT_CONTROL_REG 0xE0
+#define ASMT_CONTROL_WRITE_BIT 0x02
+#define ASMT_WRITEREG_CMD 0x10423
+#define ASMT_FLOWCTL_ADDR 0xFA30
+#define ASMT_FLOWCTL_DATA 0xBA
+#define ASMT_PSEUDO_DATA 0
+
+/* Intel quirk use */
+#define USB_INTEL_XUSB2PR 0xD0
+#define USB_INTEL_USB2PRM 0xD4
+#define USB_INTEL_USB3_PSSEN 0xD8
+#define USB_INTEL_USB3PRM 0xDC
+
+#ifdef CONFIG_USB_PCI_AMD
/* AMD quirk use */
#define AB_REG_BAR_LOW 0xe0
#define AB_REG_BAR_HIGH 0xe1
@@ -93,21 +110,6 @@
#define NB_PIF0_PWRDOWN_0 0x01100012
#define NB_PIF0_PWRDOWN_1 0x01100013
-#define USB_INTEL_XUSB2PR 0xD0
-#define USB_INTEL_USB2PRM 0xD4
-#define USB_INTEL_USB3_PSSEN 0xD8
-#define USB_INTEL_USB3PRM 0xDC
-
-/* ASMEDIA quirk use */
-#define ASMT_DATA_WRITE0_REG 0xF8
-#define ASMT_DATA_WRITE1_REG 0xFC
-#define ASMT_CONTROL_REG 0xE0
-#define ASMT_CONTROL_WRITE_BIT 0x02
-#define ASMT_WRITEREG_CMD 0x10423
-#define ASMT_FLOWCTL_ADDR 0xFA30
-#define ASMT_FLOWCTL_DATA 0xBA
-#define ASMT_PSEUDO_DATA 0
-
/*
* amd_chipset_gen values represent AMD different chipset generations
*/
@@ -460,50 +462,6 @@ void usb_amd_quirk_pll_disable(void)
}
EXPORT_SYMBOL_GPL(usb_amd_quirk_pll_disable);
-static int usb_asmedia_wait_write(struct pci_dev *pdev)
-{
- unsigned long retry_count;
- unsigned char value;
-
- for (retry_count = 1000; retry_count > 0; --retry_count) {
-
- pci_read_config_byte(pdev, ASMT_CONTROL_REG, &value);
-
- if (value == 0xff) {
- dev_err(&pdev->dev, "%s: check_ready ERROR", __func__);
- return -EIO;
- }
-
- if ((value & ASMT_CONTROL_WRITE_BIT) == 0)
- return 0;
-
- udelay(50);
- }
-
- dev_warn(&pdev->dev, "%s: check_write_ready timeout", __func__);
- return -ETIMEDOUT;
-}
-
-void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev)
-{
- if (usb_asmedia_wait_write(pdev) != 0)
- return;
-
- /* send command and address to device */
- pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_WRITEREG_CMD);
- pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_FLOWCTL_ADDR);
- pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT);
-
- if (usb_asmedia_wait_write(pdev) != 0)
- return;
-
- /* send data to device */
- pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_FLOWCTL_DATA);
- pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_PSEUDO_DATA);
- pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT);
-}
-EXPORT_SYMBOL_GPL(usb_asmedia_modifyflowcontrol);
-
void usb_amd_quirk_pll_enable(void)
{
usb_amd_quirk_pll(0);
@@ -632,7 +590,53 @@ bool usb_amd_pt_check_port(struct device *device, int port)
return !(value & BIT(port_shift));
}
EXPORT_SYMBOL_GPL(usb_amd_pt_check_port);
+#endif
+
+static int usb_asmedia_wait_write(struct pci_dev *pdev)
+{
+ unsigned long retry_count;
+ unsigned char value;
+
+ for (retry_count = 1000; retry_count > 0; --retry_count) {
+
+ pci_read_config_byte(pdev, ASMT_CONTROL_REG, &value);
+
+ if (value == 0xff) {
+ dev_err(&pdev->dev, "%s: check_ready ERROR", __func__);
+ return -EIO;
+ }
+
+ if ((value & ASMT_CONTROL_WRITE_BIT) == 0)
+ return 0;
+
+ udelay(50);
+ }
+
+ dev_warn(&pdev->dev, "%s: check_write_ready timeout", __func__);
+ return -ETIMEDOUT;
+}
+
+void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev)
+{
+ if (usb_asmedia_wait_write(pdev) != 0)
+ return;
+
+ /* send command and address to device */
+ pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_WRITEREG_CMD);
+ pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_FLOWCTL_ADDR);
+ pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT);
+
+ if (usb_asmedia_wait_write(pdev) != 0)
+ return;
+ /* send data to device */
+ pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_FLOWCTL_DATA);
+ pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_PSEUDO_DATA);
+ pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT);
+}
+EXPORT_SYMBOL_GPL(usb_asmedia_modifyflowcontrol);
+
+#ifdef CONFIG_HAS_IOPORT
/*
* Make sure the controller is completely inactive, unable to
* generate interrupts or do DMA.
@@ -713,6 +717,7 @@ int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base)
return 1;
}
EXPORT_SYMBOL_GPL(uhci_check_and_reset_hc);
+#endif
static inline int io_type_enabled(struct pci_dev *pdev, unsigned int mask)
{
@@ -725,6 +730,7 @@ static inline int io_type_enabled(struct pci_dev *pdev, unsigned int mask)
static void quirk_usb_handoff_uhci(struct pci_dev *pdev)
{
+#ifdef HAS_IOPORT
unsigned long base = 0;
int i;
@@ -739,6 +745,7 @@ static void quirk_usb_handoff_uhci(struct pci_dev *pdev)
if (base)
uhci_check_and_reset_hc(pdev, base);
+#endif
}
static int mmio_resource_enabled(struct pci_dev *pdev, int idx)
diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h
index e729de21fad7..5642318fd1d1 100644
--- a/drivers/usb/host/pci-quirks.h
+++ b/drivers/usb/host/pci-quirks.h
@@ -2,33 +2,48 @@
#ifndef __LINUX_USB_PCI_QUIRKS_H
#define __LINUX_USB_PCI_QUIRKS_H
-#ifdef CONFIG_USB_PCI
void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
-int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *pdev);
+
+#ifdef CONFIG_USB_PCI_AMD
bool usb_amd_hang_symptom_quirk(void);
bool usb_amd_prefetch_quirk(void);
void usb_amd_dev_put(void);
bool usb_amd_quirk_pll_check(void);
void usb_amd_quirk_pll_disable(void);
void usb_amd_quirk_pll_enable(void);
-void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev);
-void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev);
-void usb_disable_xhci_ports(struct pci_dev *xhci_pdev);
void sb800_prefetch(struct device *dev, int on);
bool usb_amd_pt_check_port(struct device *device, int port);
#else
-struct pci_dev;
+static inline bool usb_amd_hang_symptom_quirk(void)
+{
+ return false;
+};
+static inline bool usb_amd_prefetch_quirk(void)
+{
+ return false;
+}
+static inline bool usb_amd_quirk_pll_check(void)
+{
+ return false;
+}
static inline void usb_amd_quirk_pll_disable(void) {}
static inline void usb_amd_quirk_pll_enable(void) {}
-static inline void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev) {}
static inline void usb_amd_dev_put(void) {}
-static inline void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) {}
static inline void sb800_prefetch(struct device *dev, int on) {}
static inline bool usb_amd_pt_check_port(struct device *device, int port)
{
return false;
}
+#endif /* CONFIG_USB_PCI_AMD */
+
+#ifdef CONFIG_USB_PCI
+void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev);
+void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev);
+void usb_disable_xhci_ports(struct pci_dev *xhci_pdev);
+#else
+static inline void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev) {}
+static inline void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) {}
#endif /* CONFIG_USB_PCI */
#endif /* __LINUX_USB_PCI_QUIRKS_H */
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index 7cdc2fa7c28f..fd2408b553cf 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -841,7 +841,7 @@ static int uhci_count_ports(struct usb_hcd *hcd)
static const char hcd_name[] = "uhci_hcd";
-#ifdef CONFIG_USB_PCI
+#if defined(CONFIG_USB_PCI) && defined(CONFIG_HAS_IOPORT)
#include "uhci-pci.c"
#define PCI_DRIVER uhci_pci_driver
#endif
diff --git a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h
index 0688c3e5bfe2..c77705d03ed0 100644
--- a/drivers/usb/host/uhci-hcd.h
+++ b/drivers/usb/host/uhci-hcd.h
@@ -505,41 +505,49 @@ static inline bool uhci_is_aspeed(const struct uhci_hcd *uhci)
* we use memory mapped registers.
*/
+#ifdef CONFIG_HAS_IOPORT
+#define UHCI_IN(x) x
+#define UHCI_OUT(x) x
+#else
+#define UHCI_IN(x) 0
+#define UHCI_OUT(x)
+#endif
+
#ifndef CONFIG_USB_UHCI_SUPPORT_NON_PCI_HC
/* Support PCI only */
static inline u32 uhci_readl(const struct uhci_hcd *uhci, int reg)
{
- return inl(uhci->io_addr + reg);
+ return UHCI_IN(inl(uhci->io_addr + reg));
}
static inline void uhci_writel(const struct uhci_hcd *uhci, u32 val, int reg)
{
- outl(val, uhci->io_addr + reg);
+ UHCI_OUT(outl(val, uhci->io_addr + reg));
}
static inline u16 uhci_readw(const struct uhci_hcd *uhci, int reg)
{
- return inw(uhci->io_addr + reg);
+ return UHCI_IN(inw(uhci->io_addr + reg));
}
static inline void uhci_writew(const struct uhci_hcd *uhci, u16 val, int reg)
{
- outw(val, uhci->io_addr + reg);
+ UHCI_OUT(outw(val, uhci->io_addr + reg));
}
static inline u8 uhci_readb(const struct uhci_hcd *uhci, int reg)
{
- return inb(uhci->io_addr + reg);
+ return UHCI_IN(inb(uhci->io_addr + reg));
}
static inline void uhci_writeb(const struct uhci_hcd *uhci, u8 val, int reg)
{
- outb(val, uhci->io_addr + reg);
+ UHCI_OUT(outb(val, uhci->io_addr + reg));
}
#else
/* Support non-PCI host controllers */
-#ifdef CONFIG_USB_PCI
+#if defined(CONFIG_USB_PCI) && defined(HAS_IOPORT)
/* Support PCI and non-PCI host controllers */
#define uhci_has_pci_registers(u) ((u)->io_addr != 0)
#else
@@ -587,7 +595,7 @@ static inline int uhci_aspeed_reg(unsigned int reg)
static inline u32 uhci_readl(const struct uhci_hcd *uhci, int reg)
{
if (uhci_has_pci_registers(uhci))
- return inl(uhci->io_addr + reg);
+ return UHCI_IN(inl(uhci->io_addr + reg));
else if (uhci_is_aspeed(uhci))
return readl(uhci->regs + uhci_aspeed_reg(reg));
#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
@@ -601,7 +609,7 @@ static inline u32 uhci_readl(const struct uhci_hcd *uhci, int reg)
static inline void uhci_writel(const struct uhci_hcd *uhci, u32 val, int reg)
{
if (uhci_has_pci_registers(uhci))
- outl(val, uhci->io_addr + reg);
+ UHCI_OUT(outl(val, uhci->io_addr + reg));
else if (uhci_is_aspeed(uhci))
writel(val, uhci->regs + uhci_aspeed_reg(reg));
#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
@@ -615,7 +623,7 @@ static inline void uhci_writel(const struct uhci_hcd *uhci, u32 val, int reg)
static inline u16 uhci_readw(const struct uhci_hcd *uhci, int reg)
{
if (uhci_has_pci_registers(uhci))
- return inw(uhci->io_addr + reg);
+ return UHCI_IN(inw(uhci->io_addr + reg));
else if (uhci_is_aspeed(uhci))
return readl(uhci->regs + uhci_aspeed_reg(reg));
#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
@@ -629,7 +637,7 @@ static inline u16 uhci_readw(const struct uhci_hcd *uhci, int reg)
static inline void uhci_writew(const struct uhci_hcd *uhci, u16 val, int reg)
{
if (uhci_has_pci_registers(uhci))
- outw(val, uhci->io_addr + reg);
+ UHCI_OUT(outw(val, uhci->io_addr + reg));
else if (uhci_is_aspeed(uhci))
writel(val, uhci->regs + uhci_aspeed_reg(reg));
#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
@@ -643,7 +651,7 @@ static inline void uhci_writew(const struct uhci_hcd *uhci, u16 val, int reg)
static inline u8 uhci_readb(const struct uhci_hcd *uhci, int reg)
{
if (uhci_has_pci_registers(uhci))
- return inb(uhci->io_addr + reg);
+ return UHCI_IN(inb(uhci->io_addr + reg));
else if (uhci_is_aspeed(uhci))
return readl(uhci->regs + uhci_aspeed_reg(reg));
#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
@@ -657,7 +665,7 @@ static inline u8 uhci_readb(const struct uhci_hcd *uhci, int reg)
static inline void uhci_writeb(const struct uhci_hcd *uhci, u8 val, int reg)
{
if (uhci_has_pci_registers(uhci))
- outb(val, uhci->io_addr + reg);
+ UHCI_OUT(outb(val, uhci->io_addr + reg));
else if (uhci_is_aspeed(uhci))
writel(val, uhci->regs + uhci_aspeed_reg(reg));
#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
@@ -668,6 +676,8 @@ static inline void uhci_writeb(const struct uhci_hcd *uhci, u8 val, int reg)
writeb(val, uhci->regs + reg);
}
#endif /* CONFIG_USB_UHCI_SUPPORT_NON_PCI_HC */
+#undef UHCI_IN
+#undef UHCI_OUT
/*
* The GRLIB GRUSBHC controller can use big endian format for its descriptors.
--
2.37.2
next prev parent reply other threads:[~2023-03-14 12:16 UTC|newest]
Thread overview: 110+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-14 12:11 [PATCH v3 00/38] Kconfig: Introduce HAS_IOPORT config option Niklas Schnelle
2023-03-14 12:11 ` [PATCH v3 01/38] Kconfig: introduce HAS_IOPORT option and select it as necessary Niklas Schnelle
2023-03-14 12:37 ` Johannes Berg
2023-03-23 13:23 ` Niklas Schnelle
2023-03-14 12:48 ` Geert Uytterhoeven
2023-03-14 13:29 ` Arnd Bergmann
2023-03-14 16:11 ` Niklas Schnelle
2023-03-14 16:37 ` Niklas Schnelle
2023-03-14 12:11 ` [PATCH v3 02/38] ata: add HAS_IOPORT dependencies Niklas Schnelle
2023-03-15 1:23 ` Damien Le Moal
2023-03-15 6:46 ` Arnd Bergmann
2023-03-15 7:15 ` Damien Le Moal
2023-03-15 7:15 ` Damien Le Moal
2023-03-15 8:39 ` Geert Uytterhoeven
2023-03-15 9:12 ` Damien Le Moal
2023-03-15 11:36 ` Geert Uytterhoeven
2023-03-15 23:57 ` Damien Le Moal
2023-03-16 15:21 ` Arnd Bergmann
2023-04-28 13:32 ` Niklas Schnelle
2023-03-14 12:11 ` [PATCH v3 03/38] char: impi, tpm: depend on HAS_IOPORT Niklas Schnelle
2023-03-14 12:20 ` Jarkko Sakkinen
2023-03-14 14:01 ` Arnd Bergmann
2023-03-14 13:52 ` Corey Minyard
2023-03-14 14:17 ` Geert Uytterhoeven
2023-03-14 15:08 ` Arnd Bergmann
2023-03-21 14:33 ` Jason Gunthorpe
2023-03-14 12:11 ` [PATCH v3 04/38] comedi: add HAS_IOPORT dependencies Niklas Schnelle
2023-03-14 12:11 ` [PATCH v3 05/38] counter: " Niklas Schnelle
2023-03-14 12:41 ` William Breathitt Gray
2023-04-28 13:27 ` Niklas Schnelle
2023-03-14 12:11 ` [PATCH v3 06/38] /dev/port: don't compile file operations without CONFIG_DEVPORT Niklas Schnelle
2023-03-14 12:11 ` [PATCH v3 07/38] drm: handle HAS_IOPORT dependencies Niklas Schnelle
2023-03-15 11:54 ` Jani Nikula
2023-03-23 15:05 ` Niklas Schnelle
2023-03-14 12:11 ` [PATCH v3 08/38] firmware: dmi-sysfs: handle HAS_IOPORT=n Niklas Schnelle
2023-03-14 12:11 ` [PATCH v3 09/38] gpio: add HAS_IOPORT dependencies Niklas Schnelle
2023-03-15 8:42 ` Linus Walleij
2023-04-28 14:41 ` Niklas Schnelle
2023-05-01 12:29 ` Linus Walleij
2023-03-14 12:11 ` [PATCH v3 10/38] hwmon: " Niklas Schnelle
2023-03-14 12:11 ` [PATCH v3 11/38] i2c: " Niklas Schnelle
2023-03-14 12:11 ` [PATCH v3 12/38] iio: ad7606: Kconfig: " Niklas Schnelle
2023-03-14 12:11 ` [PATCH v3 13/38] Input: " Niklas Schnelle
2023-03-15 8:22 ` Geert Uytterhoeven
2023-04-28 14:50 ` Niklas Schnelle
2023-03-14 12:11 ` [PATCH v3 14/38] Input: gameport: add ISA and " Niklas Schnelle
2023-03-14 12:11 ` [PATCH v3 15/38] leds: add " Niklas Schnelle
2023-03-16 16:14 ` Lee Jones
2023-03-23 12:42 ` Niklas Schnelle
2023-03-23 13:32 ` Arnd Bergmann
2023-03-23 14:02 ` Niklas Schnelle
2023-03-23 14:05 ` Arnd Bergmann
2023-03-23 16:11 ` Geert Uytterhoeven
2023-03-23 16:25 ` Arnd Bergmann
2023-03-23 14:53 ` Lee Jones
2023-03-23 15:33 ` Niklas Schnelle
2023-03-14 12:11 ` [PATCH v3 16/38] media: " Niklas Schnelle
2023-03-14 12:11 ` [PATCH v3 17/38] misc: " Niklas Schnelle
2023-03-14 12:11 ` [PATCH v3 18/38] mISDN: " Niklas Schnelle
2023-03-15 5:41 ` Jakub Kicinski
2023-03-14 12:11 ` [PATCH v3 19/38] mpt fusion: " Niklas Schnelle
2023-03-14 12:11 ` [PATCH v3 20/38] net: handle " Niklas Schnelle
2023-03-15 5:41 ` Jakub Kicinski
2023-03-15 9:47 ` Maciej W. Rozycki
2023-03-14 12:11 ` [PATCH v3 21/38] parport: PC style parport depends on HAS_IOPORT Niklas Schnelle
2023-03-14 14:12 ` Arnd Bergmann
2023-05-02 13:40 ` Niklas Schnelle
2023-05-02 15:30 ` Bjorn Helgaas
2023-03-14 12:12 ` [PATCH v3 22/38] PCI: Make quirk using inw() depend " Niklas Schnelle
2023-03-14 12:12 ` [PATCH v3 23/38] PCI/sysfs: Make I/O resource " Niklas Schnelle
2023-03-14 16:05 ` Bjorn Helgaas
2023-03-14 12:12 ` [PATCH v3 24/38] pcmcia: add HAS_IOPORT dependencies Niklas Schnelle
2023-03-14 12:12 ` [PATCH v3 25/38] platform: " Niklas Schnelle
2023-03-15 2:21 ` Tzung-Bi Shih
2023-03-14 12:12 ` [PATCH v3 26/38] pnp: " Niklas Schnelle
2023-03-20 17:37 ` Rafael J. Wysocki
2023-03-21 13:56 ` Rafael J. Wysocki
2023-03-23 12:55 ` Niklas Schnelle
2023-03-24 18:45 ` Wysocki, Rafael J
2023-03-14 12:12 ` [PATCH v3 27/38] power: " Niklas Schnelle
2023-03-29 23:01 ` Sebastian Reichel
2023-03-14 12:12 ` [PATCH v3 28/38] rtc: " Niklas Schnelle
2023-03-14 12:52 ` Alexandre Belloni
2023-05-08 15:36 ` Niklas Schnelle
2023-05-08 20:01 ` Arnd Bergmann
2023-05-09 6:38 ` Geert Uytterhoeven
2023-05-09 8:22 ` Arnd Bergmann
2023-05-09 8:51 ` Geert Uytterhoeven
2023-05-09 9:46 ` Arnd Bergmann
2023-03-14 12:12 ` [PATCH v3 29/38] scsi: " Niklas Schnelle
2023-03-14 12:12 ` [PATCH v3 30/38] sound: " Niklas Schnelle
2023-03-14 12:33 ` Takashi Iwai
2023-05-08 16:41 ` Niklas Schnelle
2023-03-14 12:12 ` [PATCH v3 31/38] speakup: add HAS_IOPORT dependency for SPEAKUP_SERIALIO Niklas Schnelle
2023-03-14 12:12 ` [PATCH v3 32/38] staging: add HAS_IOPORT dependencies Niklas Schnelle
2023-03-14 12:12 ` [PATCH v3 33/38] tty: serial: handle " Niklas Schnelle
2023-03-14 12:12 ` Niklas Schnelle [this message]
2023-03-14 14:56 ` [PATCH v3 34/38] usb: " Arnd Bergmann
2023-03-14 12:12 ` [PATCH v3 35/38] video: " Niklas Schnelle
2023-03-15 8:16 ` Geert Uytterhoeven
2023-03-15 10:19 ` Ville Syrjälä
2023-03-23 14:17 ` Niklas Schnelle
2023-03-23 16:08 ` Ville Syrjälä
2023-05-08 17:09 ` Niklas Schnelle
2023-03-14 12:12 ` [PATCH v3 36/38] watchdog: add " Niklas Schnelle
2023-03-14 14:21 ` Guenter Roeck
2023-03-14 12:12 ` [PATCH v3 37/38] wireless: " Niklas Schnelle
2023-03-15 5:26 ` Kalle Valo
2023-03-14 12:12 ` [PATCH v3 38/38] asm-generic/io.h: drop inb() etc for HAS_IOPORT=n Niklas Schnelle
2023-03-14 14:05 ` [PATCH v3 00/38] Kconfig: Introduce HAS_IOPORT config option Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230314121216.413434-35-schnelle@linux.ibm.com \
--to=schnelle@linux.ibm.com \
--cc=aou@eecs.berkeley.edu \
--cc=arnd@arndb.de \
--cc=arnd@kernel.org \
--cc=bhelgaas@google.com \
--cc=geert@linux-m68k.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-arch@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mathias.nyman@intel.com \
--cc=mchehab@kernel.org \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=rafael@kernel.org \
--cc=stern@rowland.harvard.edu \
--cc=u.kleine-koenig@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).