linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: tomas.krcka@gmail.com
To: will@kernel.org
Cc: Tomas Krcka <krckatom@amazon.de>,
	Robin Murphy <robin.murphy@arm.com>,
	Joerg Roedel <joro@8bytes.org>,
	Lu Baolu <baolu.lu@linux.intel.com>,
	Jason Gunthorpe <jgg@ziepe.ca>,
	Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>,
	linux-arm-kernel@lists.infradead.org, iommu@lists.linux.dev,
	linux-kernel@vger.kernel.org
Subject: [PATCH] iommu/arm-smmu-v3: Acknowledge pri/event queue overflow if any
Date: Wed, 29 Mar 2023 12:34:19 +0000	[thread overview]
Message-ID: <20230329123420.34641-1-tomas.krcka@gmail.com> (raw)

From: Tomas Krcka <krckatom@amazon.de>

When an overflow occurs in the PRI queue, the SMMU toggles the overflow
flag in the PROD register. To exit the overflow condition, the PRI thread
is supposed to acknowledge it by toggling this flag in the CONS register.
Unacknowledged overflow causes the queue to stop adding anything new.

Currently, the priq thread always writes the CONS register back to the
SMMU after clearing the queue.

The writeback is not necessary if the OVFLG in the PROD register has not
been changed, no overflow has occured.

This commit checks the difference of the overflow flag between CONS and
PROD register. If it's different, toggles the OVACKFLG flag in the CONS
register and write it to the SMMU.

The situation is similar for the event queue.
The acknowledge register is also toggled after clearing the event
queue but never propagated to the hardware. This would only be done the
next time when executing evtq thread.

Unacknowledged event queue overflow doesn't affect the event
queue, because the SMMU still adds elements to that queue when the
overflow condition is active.
But it feel nicer to keep SMMU in sync when possible, so use the same
way here as well.

Signed-off-by: Tomas Krcka <krckatom@amazon.de>
---
 drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 19 ++++++++++++++-----
 1 file changed, 14 insertions(+), 5 deletions(-)

diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
index f2425b0f0cd6..7614739ea2c1 100644
--- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
+++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
@@ -152,6 +152,18 @@ static void queue_inc_cons(struct arm_smmu_ll_queue *q)
 	q->cons = Q_OVF(q->cons) | Q_WRP(q, cons) | Q_IDX(q, cons);
 }
 
+static void queue_sync_cons_ovf(struct arm_smmu_queue *q)
+{
+	struct arm_smmu_ll_queue *llq = &q->llq;
+
+	if (likely(Q_OVF(llq->prod) == Q_OVF(llq->cons)))
+		return;
+
+	llq->cons = Q_OVF(llq->prod) | Q_WRP(llq, llq->cons) |
+		      Q_IDX(llq, llq->cons);
+	queue_sync_cons_out(q);
+}
+
 static int queue_sync_prod_in(struct arm_smmu_queue *q)
 {
 	u32 prod;
@@ -1577,8 +1589,7 @@ static irqreturn_t arm_smmu_evtq_thread(int irq, void *dev)
 	} while (!queue_empty(llq));
 
 	/* Sync our overflow flag, as we believe we're up to speed */
-	llq->cons = Q_OVF(llq->prod) | Q_WRP(llq, llq->cons) |
-		    Q_IDX(llq, llq->cons);
+	queue_sync_cons_ovf(q);
 	return IRQ_HANDLED;
 }
 
@@ -1636,9 +1647,7 @@ static irqreturn_t arm_smmu_priq_thread(int irq, void *dev)
 	} while (!queue_empty(llq));
 
 	/* Sync our overflow flag, as we believe we're up to speed */
-	llq->cons = Q_OVF(llq->prod) | Q_WRP(llq, llq->cons) |
-		      Q_IDX(llq, llq->cons);
-	queue_sync_cons_out(q);
+	queue_sync_cons_ovf(q);
 	return IRQ_HANDLED;
 }
 
-- 
2.39.2


             reply	other threads:[~2023-03-29 12:34 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-03-29 12:34 tomas.krcka [this message]
2023-04-06  8:13 ` [PATCH] iommu/arm-smmu-v3: Acknowledge pri/event queue overflow if any Tomas Krcka
2023-04-06 15:51 ` Will Deacon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230329123420.34641-1-tomas.krcka@gmail.com \
    --to=tomas.krcka@gmail.com \
    --cc=baolu.lu@linux.intel.com \
    --cc=iommu@lists.linux.dev \
    --cc=jgg@ziepe.ca \
    --cc=joro@8bytes.org \
    --cc=krckatom@amazon.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robin.murphy@arm.com \
    --cc=shameerali.kolothum.thodi@huawei.com \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).