Hi Vladimir, > Hello Lukasz, > > On Mon, May 29, 2023 at 11:02:22AM +0200, Lukasz Majewski wrote: > > Dear All, > > > > > After the commit (SHA1: 7e9517375a14f44ee830ca1c3278076dd65fcc8f); > > > "net: dsa: mv88e6xxx: fix max_mtu of 1492 on 6165, 6191, 6220, > > > 6250, 6290" the error when mv88e6020 or mv88e6071 is used is not > > > present anymore. > > > > > > > Are there any more comments for this patch set? > > Has your email client eaten these comments too? > > https://lore.kernel.org/netdev/c39f4127-e1fe-4d38-83eb-f372ca2ebcd3@lunn.ch/ > | On Wed, May 24, 2023 at 03:48:02PM +0200, Andrew Lunn wrote: > | > > > Vladimir indicates here that it is not known how to change > the max MTU | > > > for the MV88E6250. Where did you get the > information from to implement | > > > it? > | > > > | > > Please refer to [1]. > | > > > | > > The mv88e6185_g1_set_max_frame_size() function can be reused (as > | > > registers' offsets and bits are the same for mv88e60{71|20}). > | > > | > So you have the datasheet? You get the information to implement > this | > from the data sheet? > | > This I've replied to Andrew in a private mail. > | > Andrew > > https://lore.kernel.org/netdev/ZG4E+wd03cKipsib@shell.armlinux.org.uk/ > | On Wed, May 24, 2023 at 01:37:15PM +0100, Russell King (Oracle) > wrote: | > On Wed, May 24, 2023 at 02:17:43PM +0200, Lukasz Majewski > wrote: | > > Please refer to [1]. > | > > > | > > The mv88e6185_g1_set_max_frame_size() function can be reused (as > | > > registers' offsets and bits are the same for mv88e60{71|20}). > | > > > | > > After using Vladimir's patch there is no need to add max_frame > size | > > field and related patches from v6 can be dropped. > | > > | > However, you haven't responded to: > | > > | > > https://lore.kernel.org/all/ZGzP0qEjQkCFnXnr@shell.armlinux.org.uk/ | > > | > to explain why what you're doing (adding this function) is safe. > | > > | > Thanks. > | > The above question has been replied: https://lore.kernel.org/all/20230524145357.3928f261@wsk/ > | > -- > | > RMK's Patch system: https://www.armlinux.org.uk/developer/patches/ > | > FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last! Do you have any more comments? Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Erika Unter HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@denx.de