Re: [PATCH V15 2/4] dt-bindings: pwm: add IPQ6018 binding

["Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>]

[-- Attachment #1: Type: text/plain, Size: 3834 bytes --]

Hello,

On Thu, Oct 05, 2023 at 09:35:48PM +0530, Devi Priya wrote:
> DT binding for the PWM block in Qualcomm IPQ6018 SoC.
> 
> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Co-developed-by: Baruch Siach <baruch.siach@siklu.com>
> Signed-off-by: Baruch Siach <baruch.siach@siklu.com>
> Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
> ---
> v15:
> 
>   No change
> 
> v14:
> 
>   Picked up the R-b tag
> 
> v13:
> 
>   Updated the file name to match the compatible
>   
>   Sorted the properties and updated the order in the required field
> 
>   Dropped the syscon node from examples
> 
> v12:
> 
>   Picked up the R-b tag
> 
> v11:
> 
>   No change
> 
> v10:
> 
>   No change
> 
> v9:
> 
>   Add 'ranges' property to example (Rob)
> 
>   Drop label in example (Rob)
> 
> v8:
> 
>   Add size cell to 'reg' (Rob)
> 
> v7:
> 
>   Use 'reg' instead of 'offset' (Rob)
> 
>   Drop 'clock-names' and 'assigned-clock*' (Bjorn)
> 
>   Use single cell address/size in example node (Bjorn)
> 
>   Move '#pwm-cells' lower in example node (Bjorn)
> 
>   List 'reg' as required
> 
> v6:
> 
>   Device node is child of TCSR; remove phandle (Rob Herring)
> 
>   Add assigned-clocks/assigned-clock-rates (Uwe Kleine-König)
> 
> v5: Use qcom,pwm-regs for phandle instead of direct regs (Bjorn
>     Andersson, Kathiravan T)
> 
> v4: Update the binding example node as well (Rob Herring's bot)
> 
> v3: s/qcom,pwm-ipq6018/qcom,ipq6018-pwm/ (Rob Herring)
> 
> v2: Make #pwm-cells const (Rob Herring)
> 
>  .../bindings/pwm/qcom,ipq6018-pwm.yaml        | 45 +++++++++++++++++++
>  1 file changed, 45 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pwm/qcom,ipq6018-pwm.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pwm/qcom,ipq6018-pwm.yaml b/Documentation/devicetree/bindings/pwm/qcom,ipq6018-pwm.yaml
> new file mode 100644
> index 000000000000..6d0d7ed271f7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pwm/qcom,ipq6018-pwm.yaml
> @@ -0,0 +1,45 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pwm/qcom,ipq6018-pwm.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm IPQ6018 PWM controller
> +
> +maintainers:
> +  - Baruch Siach <baruch@tkos.co.il>

Not being very fluent in dt and binding yaml I wonder if adding

	allOf:
	  - $ref: pwm.yaml#

would be beneficial?!

> +properties:
> +  compatible:
> +    const: qcom,ipq6018-pwm
> +
> +  reg:
> +    description: Offset of PWM register in the TCSR block.
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  "#pwm-cells":
> +    const: 2

The driver only supports normal polarity. Is this a shortcoming of the
driver, or is the hardware incapable to do that, too?

If it's only the former I'd want #pwm-cells = <3> here. For ease of use
I'd not oppose if you pick #pwm-cells = <3> even if the hardware can
only do normal polarity.

> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - "#pwm-cells"
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/qcom,gcc-ipq6018.h>
> +
> +    pwm: pwm@a010 {
> +        compatible = "qcom,ipq6018-pwm";
> +        reg = <0xa010 0x20>;
> +        clocks = <&gcc GCC_ADSS_PWM_CLK>;
> +        assigned-clocks = <&gcc GCC_ADSS_PWM_CLK>;
> +        assigned-clock-rates = <100000000>;
> +        #pwm-cells = <2>;
> +    };

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | https://www.pengutronix.de/ |

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]