From: Lorenz Brun <lorenz@brun.one>
To: Stefan Binding <sbinding@opensource.cirrus.com>,
James Schulman <james.schulman@cirrus.com>,
David Rhodes <david.rhodes@cirrus.com>,
Richard Fitzgerald <rf@opensource.cirrus.com>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>
Cc: alsa-devel@alsa-project.org, patches@opensource.cirrus.com,
linux-sound@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2] ALSA: hda: cs35l41: Add HP override
Date: Sat, 23 Dec 2023 16:09:11 +0100 [thread overview]
Message-ID: <20231223150912.3040328-1-lorenz@brun.one> (raw)
This adds an override for a series of notebooks using a common config
taken from HP's proprietary Windows driver.
This has been tested on a HP 15-ey0xxxx device (subsystem 103C8A31)
together with another Realtek quirk and the calibration files from the
proprietary driver.
Signed-off-by: Lorenz Brun <lorenz@brun.one>
---
Changes in v2:
- Use newly-introduced config table instead of function
- Change boost cap value from 10uF to 24uF after cross-referencing my
sources with the preexisting 103C89C6 entry.
Just noticed that yesterday I sent out another copy of v1 instead of v2,
sorry about that.
sound/pci/hda/cs35l41_hda_property.c | 46 ++++++++++++++++++++++++++++
1 file changed, 46 insertions(+)
diff --git a/sound/pci/hda/cs35l41_hda_property.c b/sound/pci/hda/cs35l41_hda_property.c
index c9eb70290973..c65b106ff1ab 100644
--- a/sound/pci/hda/cs35l41_hda_property.c
+++ b/sound/pci/hda/cs35l41_hda_property.c
@@ -42,6 +42,30 @@ static const struct cs35l41_config cs35l41_config_table[] = {
* in the ACPI. The Reset GPIO is also valid, so we can use the Reset defined in _DSD.
*/
{ "103C89C6", SPI, 2, INTERNAL, { CS35L41_RIGHT, CS35L41_LEFT, 0, 0 }, -1, -1, -1, 1000, 4500, 24 },
+
+ { "103C8A28", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+ { "103C8A29", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+ { "103C8A2A", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+ { "103C8A2B", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+ { "103C8A2C", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+ { "103C8A2D", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+ { "103C8A2E", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+ { "103C8A30", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+ { "103C8A31", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+ { "103C8BB3", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+ { "103C8BB4", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+ { "103C8BDF", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+ { "103C8BE0", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+ { "103C8BE1", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+ { "103C8BE2", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+ { "103C8BE9", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+ { "103C8BDD", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+ { "103C8BDE", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+ { "103C8BE3", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+ { "103C8BE5", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+ { "103C8BE6", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+ { "103C8B3A", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+
{ "104312AF", SPI, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 },
{ "10431433", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4500, 24 },
{ "10431463", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4500, 24 },
@@ -374,6 +398,28 @@ static const struct cs35l41_prop_model cs35l41_prop_model_table[] = {
{ "CSC3551", "10431F12", generic_dsd_config },
{ "CSC3551", "10431F1F", generic_dsd_config },
{ "CSC3551", "10431F62", generic_dsd_config },
+ { "CSC3551", "103C8A28", generic_dsd_config },
+ { "CSC3551", "103C8A29", generic_dsd_config },
+ { "CSC3551", "103C8A2A", generic_dsd_config },
+ { "CSC3551", "103C8A2B", generic_dsd_config },
+ { "CSC3551", "103C8A2C", generic_dsd_config },
+ { "CSC3551", "103C8A2D", generic_dsd_config },
+ { "CSC3551", "103C8A2E", generic_dsd_config },
+ { "CSC3551", "103C8A30", generic_dsd_config },
+ { "CSC3551", "103C8A31", generic_dsd_config },
+ { "CSC3551", "103C8BB3", generic_dsd_config },
+ { "CSC3551", "103C8BB4", generic_dsd_config },
+ { "CSC3551", "103C8BDF", generic_dsd_config },
+ { "CSC3551", "103C8BE0", generic_dsd_config },
+ { "CSC3551", "103C8BE1", generic_dsd_config },
+ { "CSC3551", "103C8BE2", generic_dsd_config },
+ { "CSC3551", "103C8BE9", generic_dsd_config },
+ { "CSC3551", "103C8BDD", generic_dsd_config },
+ { "CSC3551", "103C8BDE", generic_dsd_config },
+ { "CSC3551", "103C8BE3", generic_dsd_config },
+ { "CSC3551", "103C8BE5", generic_dsd_config },
+ { "CSC3551", "103C8BE6", generic_dsd_config },
+ { "CSC3551", "103C8B3A", generic_dsd_config },
{}
};
--
2.42.0
next reply other threads:[~2023-12-23 15:09 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-23 15:09 Lorenz Brun [this message]
2023-12-29 14:19 ` [PATCH v2] ALSA: hda: cs35l41: Add HP override Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231223150912.3040328-1-lorenz@brun.one \
--to=lorenz@brun.one \
--cc=alsa-devel@alsa-project.org \
--cc=david.rhodes@cirrus.com \
--cc=james.schulman@cirrus.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=patches@opensource.cirrus.com \
--cc=perex@perex.cz \
--cc=rf@opensource.cirrus.com \
--cc=sbinding@opensource.cirrus.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).