From: Borislav Petkov <bp@alien8.de>
To: linux-i2c@vger.kernel.org
Cc: lkml <linux-kernel@vger.kernel.org>,
Jarkko Nikula <jarkko.nikula@linux.intel.com>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Mika Westerberg <mika.westerberg@linux.intel.com>,
Jan Dabros <jsd@semihalf.com>, Andi Shyti <andi.shyti@kernel.org>,
Mario Limonciello <mario.limonciello@amd.com>,
narasimhan.v@amd.com
Subject: i2c-designware: NULL ptr at RIP: 0010:regmap_read+0x12/0x70
Date: Fri, 29 Dec 2023 13:08:20 +0100 [thread overview]
Message-ID: <20231229120820.GCZY62tM7z4v2XmOAZ@fat_crate.local> (raw)
Hi,
we're seeing the below splat in our testing of linux-next.
Disassembling Code: gives
17: 90 nop
18: f3 0f 1e fa endbr64
1c: 0f 1f 44 00 00 nopl 0x0(%rax,%rax,1)
21: 55 push %rbp
22: 48 89 e5 mov %rsp,%rbp
25: 41 55 push %r13
27: 41 54 push %r12
29: 53 push %rbx
2a:* 8b 87 fc 01 00 00 mov 0x1fc(%rdi),%eax <-- trapping instruction
which is
regmap_read:
endbr64
1: call __fentry__
.section __mcount_loc, "a",@progbits
.quad 1b
.previous
pushq %rbp #
movq %rsp, %rbp #,
pushq %r13 #
pushq %r12 #
pushq %rbx #
# drivers/base/regmap/regmap.c:2826: if (!IS_ALIGNED(reg, map->reg_stride))
movl 508(%rdi), %eax # map_12(D)->reg_stride, tmp107
^^^^^^^^
i.e., that @map argument is 0.
Looking at the call stack, I see
2409205acd3c ("i2c: designware: fix __i2c_dw_disable() in case master is holding SCL low")
which does that dev->map deref in __i2c_dw_disable() but maybe ->map is
invalid by then...?
Just a stab in the dark anyway...
Thx.
[ 6.245173] i2c_designware AMDI0010:00: Unknown Synopsys component type: 0xffffffff
[ 6.252683] BUG: kernel NULL pointer dereference, address: 00000000000001fc
[ 6.256551] #PF: supervisor read access in kernel mode
[ 6.256551] #PF: error_code(0x0000) - not-present page
[ 6.256551] PGD 0
[ 6.256551] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ 6.256551] CPU: 32 PID: 211 Comm: kworker/32:0 Not tainted 6.7.0-rc6-next-20231222-1703820640818 #1
[ 6.256551] Workqueue: pm pm_runtime_work
[ 6.256551] RIP: 0010:regmap_read+0x12/0x70
[ 6.256551] Code: 00 00 00 00 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 55 48 89 e5 41 55 41 54 53 <8b> 87 fc 01 00 00 83 e8 01 85 f0 75 42 48 89 fb 41 89 f4 49 89 d5
[ 6.256551] RSP: 0018:ff7fa5c740bcbc98 EFLAGS: 00010246
[ 6.256551] RAX: 0000000000000000 RBX: ff38ff5c159f1028 RCX: 0000000000000008
[ 6.256551] RDX: ff7fa5c740bcbcc4 RSI: 0000000000000034 RDI: 0000000000000000
[ 6.256551] RBP: ff7fa5c740bcbcb0 R08: ff38ff5c02ceb8b0 R09: ff38ff5c002a4500
[ 6.256551] R10: 0000000000000003 R11: 0000000000000003 R12: ff38ff5c159f1028
[ 6.256551] R13: 0000000000000000 R14: 0000000000000000 R15: ff38ff5c159ed8f4
[ 6.256551] FS: 0000000000000000(0000) GS:ff38ff6b0d200000(0000) knlGS:0000000000000000
[ 6.256551] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 6.256551] CR2: 00000000000001fc CR3: 000000007403c001 CR4: 0000000000771ef0
[ 6.256551] PKRU: 55555554
[ 6.256551] Call Trace:
[ 6.256551] <TASK>
[ 6.256551] ? show_regs+0x6d/0x80
[ 6.256551] ? __die+0x29/0x70
[ 6.256551] ? page_fault_oops+0x153/0x4a0
[ 6.256551] ? do_user_addr_fault+0x30f/0x6c0
[ 6.256551] ? exc_page_fault+0x7c/0x190
[ 6.256551] ? asm_exc_page_fault+0x2b/0x30
[ 6.256551] ? regmap_read+0x12/0x70
[ 6.256551] ? update_load_avg+0x82/0x7d0
[ 6.256551] __i2c_dw_disable+0x38/0x180
[ 6.256551] i2c_dw_disable+0x3f/0xb0
[ 6.256551] i2c_dw_runtime_suspend+0x33/0x50
[ 6.256551] ? __pfx_pm_generic_runtime_suspend+0x10/0x10
[ 6.256551] pm_generic_runtime_suspend+0x2f/0x40
[ 6.256551] __rpm_callback+0x48/0x120
[ 6.256551] ? __pfx_pm_generic_runtime_suspend+0x10/0x10
[ 6.256551] rpm_callback+0x66/0x70
[ 6.256551] ? __pfx_pm_generic_runtime_suspend+0x10/0x10
[ 6.256551] rpm_suspend+0x166/0x700
[ 6.256551] ? srso_alias_return_thunk+0x5/0xfbef5
[ 6.256551] ? __schedule+0x3df/0x1720
[ 6.256551] pm_runtime_work+0xb2/0xd0
[ 6.256551] process_one_work+0x178/0x350
[ 6.256551] worker_thread+0x2f5/0x420
[ 6.256551] ? __pfx_worker_thread+0x10/0x10
[ 6.256551] kthread+0xf5/0x130
[ 6.256551] ? __pfx_kthread+0x10/0x10
[ 6.256551] ret_from_fork+0x3d/0x60
[ 6.256551] ? __pfx_kthread+0x10/0x10
[ 6.256551] ret_from_fork_asm+0x1a/0x30
[ 6.256551] </TASK>
[ 6.256551] Modules linked in:
[ 6.256551] CR2: 00000000000001fc
[ 6.256551] ---[ end trace 0000000000000000 ]---
[ 6.256551] RIP: 0010:regmap_read+0x12/0x70
[ 6.256551] Code: 00 00 00 00 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 55 48 89 e5 41 55 41 54 53 <8b> 87 fc 01 00 00 83 e8 01 85 f0 75 42 48 89 fb 41 89 f4 49 89 d5
[ 6.256551] RSP: 0018:ff7fa5c740bcbc98 EFLAGS: 00010246
[ 6.256551] RAX: 0000000000000000 RBX: ff38ff5c159f1028 RCX: 0000000000000008
[ 6.256551] RDX: ff7fa5c740bcbcc4 RSI: 0000000000000034 RDI: 0000000000000000
[ 6.256551] RBP: ff7fa5c740bcbcb0 R08: ff38ff5c02ceb8b0 R09: ff38ff5c002a4500
[ 6.256551] R10: 0000000000000003 R11: 0000000000000003 R12: ff38ff5c159f1028
[ 6.256551] R13: 0000000000000000 R14: 0000000000000000 R15: ff38ff5c159ed8f4
[ 6.256551] FS: 0000000000000000(0000) GS:ff38ff6b0d200000(0000) knlGS:0000000000000000
[ 6.256551] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 6.256551] CR2: 00000000000001fc CR3: 000000007403c001 CR4: 0000000000771ef0
[ 6.256551] PKRU: 55555554
[ 6.256551] note: kworker/32:0[211] exited with irqs disabled
--
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquette
next reply other threads:[~2023-12-29 12:08 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-29 12:08 Borislav Petkov [this message]
2024-01-02 13:42 ` i2c-designware: NULL ptr at RIP: 0010:regmap_read+0x12/0x70 Jarkko Nikula
[not found] ` <DM4PR12MB508654DF49FE079D6C283D658961A@DM4PR12MB5086.namprd12.prod.outlook.com>
2024-01-03 15:25 ` Jarkko Nikula
[not found] ` <DM4PR12MB5086DE2882C7C5044697B1C38967A@DM4PR12MB5086.namprd12.prod.outlook.com>
2024-01-04 13:40 ` Jarkko Nikula
2024-01-06 16:06 ` Andy Shevchenko
[not found] ` <DM4PR12MB508652E9A422CF639C2FEEC0896A2@DM4PR12MB5086.namprd12.prod.outlook.com>
2024-01-09 10:11 ` Jarkko Nikula
2024-01-10 22:56 ` Kim Phillips
2024-01-11 13:01 ` Jarkko Nikula
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231229120820.GCZY62tM7z4v2XmOAZ@fat_crate.local \
--to=bp@alien8.de \
--cc=andi.shyti@kernel.org \
--cc=andriy.shevchenko@linux.intel.com \
--cc=jarkko.nikula@linux.intel.com \
--cc=jsd@semihalf.com \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mario.limonciello@amd.com \
--cc=mika.westerberg@linux.intel.com \
--cc=narasimhan.v@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).