From: Alexey Charkov <alchark@gmail.com>
To: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Heiko Stuebner <heiko@sntech.de>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>,
Dragan Simic <dsimic@manjaro.org>,
devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org,
linux-kernel@vger.kernel.org, Alexey Charkov <alchark@gmail.com>
Subject: [PATCH 4/4] arm64: dts: rockchip: Add OPP data for CPU cores on RK3588
Date: Thu, 25 Jan 2024 00:30:07 +0400 [thread overview]
Message-ID: <20240125-rk-dts-additions-v1-4-5879275db36f@gmail.com> (raw)
In-Reply-To: <20240125-rk-dts-additions-v1-0-5879275db36f@gmail.com>
By default the CPUs on RK3588 start up in a conservative performance
mode. Add frequency and voltage mappings to the device tree to enable
dynamic scaling via cpufreq
Signed-off-by: Alexey Charkov <alchark@gmail.com>
---
arch/arm64/boot/dts/rockchip/rk3588s.dtsi | 209 ++++++++++++++++++++++++++++++
1 file changed, 209 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
index 131b9eb21398..e605be531a0f 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
@@ -97,6 +97,7 @@ cpu_l0: cpu@0 {
clocks = <&scmi_clk SCMI_CLK_CPUL>;
assigned-clocks = <&scmi_clk SCMI_CLK_CPUL>;
assigned-clock-rates = <816000000>;
+ operating-points-v2 = <&cluster0_opp_table>;
cpu-idle-states = <&CPU_SLEEP>;
i-cache-size = <32768>;
i-cache-line-size = <64>;
@@ -116,6 +117,7 @@ cpu_l1: cpu@100 {
enable-method = "psci";
capacity-dmips-mhz = <530>;
clocks = <&scmi_clk SCMI_CLK_CPUL>;
+ operating-points-v2 = <&cluster0_opp_table>;
cpu-idle-states = <&CPU_SLEEP>;
i-cache-size = <32768>;
i-cache-line-size = <64>;
@@ -135,6 +137,7 @@ cpu_l2: cpu@200 {
enable-method = "psci";
capacity-dmips-mhz = <530>;
clocks = <&scmi_clk SCMI_CLK_CPUL>;
+ operating-points-v2 = <&cluster0_opp_table>;
cpu-idle-states = <&CPU_SLEEP>;
i-cache-size = <32768>;
i-cache-line-size = <64>;
@@ -154,6 +157,7 @@ cpu_l3: cpu@300 {
enable-method = "psci";
capacity-dmips-mhz = <530>;
clocks = <&scmi_clk SCMI_CLK_CPUL>;
+ operating-points-v2 = <&cluster0_opp_table>;
cpu-idle-states = <&CPU_SLEEP>;
i-cache-size = <32768>;
i-cache-line-size = <64>;
@@ -175,6 +179,7 @@ cpu_b0: cpu@400 {
clocks = <&scmi_clk SCMI_CLK_CPUB01>;
assigned-clocks = <&scmi_clk SCMI_CLK_CPUB01>;
assigned-clock-rates = <816000000>;
+ operating-points-v2 = <&cluster1_opp_table>;
cpu-idle-states = <&CPU_SLEEP>;
i-cache-size = <65536>;
i-cache-line-size = <64>;
@@ -194,6 +199,7 @@ cpu_b1: cpu@500 {
enable-method = "psci";
capacity-dmips-mhz = <1024>;
clocks = <&scmi_clk SCMI_CLK_CPUB01>;
+ operating-points-v2 = <&cluster1_opp_table>;
cpu-idle-states = <&CPU_SLEEP>;
i-cache-size = <65536>;
i-cache-line-size = <64>;
@@ -215,6 +221,7 @@ cpu_b2: cpu@600 {
clocks = <&scmi_clk SCMI_CLK_CPUB23>;
assigned-clocks = <&scmi_clk SCMI_CLK_CPUB23>;
assigned-clock-rates = <816000000>;
+ operating-points-v2 = <&cluster2_opp_table>;
cpu-idle-states = <&CPU_SLEEP>;
i-cache-size = <65536>;
i-cache-line-size = <64>;
@@ -234,6 +241,7 @@ cpu_b3: cpu@700 {
enable-method = "psci";
capacity-dmips-mhz = <1024>;
clocks = <&scmi_clk SCMI_CLK_CPUB23>;
+ operating-points-v2 = <&cluster2_opp_table>;
cpu-idle-states = <&CPU_SLEEP>;
i-cache-size = <65536>;
i-cache-line-size = <64>;
@@ -348,6 +356,207 @@ l3_cache: l3-cache {
};
};
+ cluster0_opp_table: opp-table-cluster0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-408000000 {
+ opp-hz = /bits/ 64 <408000000>;
+ opp-microvolt = <675000 675000 950000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <675000 675000 950000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-816000000 {
+ opp-hz = /bits/ 64 <816000000>;
+ opp-microvolt = <675000 675000 950000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-1008000000 {
+ opp-hz = /bits/ 64 <1008000000>;
+ opp-microvolt = <675000 675000 950000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <712500 712500 950000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-1416000000 {
+ opp-hz = /bits/ 64 <1416000000>;
+ opp-microvolt = <762500 762500 950000>;
+ clock-latency-ns = <40000>;
+ opp-suspend;
+ };
+ opp-1608000000 {
+ opp-hz = /bits/ 64 <1608000000>;
+ opp-microvolt = <850000 850000 950000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-1800000000 {
+ opp-hz = /bits/ 64 <1800000000>;
+ opp-microvolt = <950000 950000 950000>;
+ clock-latency-ns = <40000>;
+ };
+ };
+
+ cluster1_opp_table: opp-table-cluster1 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-408000000 {
+ opp-hz = /bits/ 64 <408000000>;
+ opp-microvolt = <675000 675000 1000000>;
+ clock-latency-ns = <40000>;
+ opp-suspend;
+ };
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <675000 675000 1000000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-816000000 {
+ opp-hz = /bits/ 64 <816000000>;
+ opp-microvolt = <675000 675000 1000000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-1008000000 {
+ opp-hz = /bits/ 64 <1008000000>;
+ opp-microvolt = <675000 675000 1000000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <675000 675000 1000000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-1416000000 {
+ opp-hz = /bits/ 64 <1416000000>;
+ opp-microvolt = <725000 725000 1000000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-1608000000 {
+ opp-hz = /bits/ 64 <1608000000>;
+ opp-microvolt = <762500 762500 1000000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-1800000000 {
+ opp-hz = /bits/ 64 <1800000000>;
+ opp-microvolt = <850000 850000 1000000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-2016000000 {
+ opp-hz = /bits/ 64 <2016000000>;
+ opp-microvolt = <925000 925000 1000000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-2208000000 {
+ opp-hz = /bits/ 64 <2208000000>;
+ opp-microvolt = <987500 987500 1000000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-2256000000 {
+ opp-hz = /bits/ 64 <2256000000>;
+ opp-microvolt = <1000000 1000000 1000000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-2304000000 {
+ opp-hz = /bits/ 64 <2304000000>;
+ opp-microvolt = <1000000 1000000 1000000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-2352000000 {
+ opp-hz = /bits/ 64 <2352000000>;
+ opp-microvolt = <1000000 1000000 1000000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-2400000000 {
+ opp-hz = /bits/ 64 <2400000000>;
+ opp-microvolt = <1000000 1000000 1000000>;
+ clock-latency-ns = <40000>;
+ };
+ };
+
+ cluster2_opp_table: opp-table-cluster2 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-408000000 {
+ opp-hz = /bits/ 64 <408000000>;
+ opp-microvolt = <675000 675000 1000000>;
+ clock-latency-ns = <40000>;
+ opp-suspend;
+ };
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <675000 675000 1000000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-816000000 {
+ opp-hz = /bits/ 64 <816000000>;
+ opp-microvolt = <675000 675000 1000000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-1008000000 {
+ opp-hz = /bits/ 64 <1008000000>;
+ opp-microvolt = <675000 675000 1000000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <675000 675000 1000000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-1416000000 {
+ opp-hz = /bits/ 64 <1416000000>;
+ opp-microvolt = <725000 725000 1000000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-1608000000 {
+ opp-hz = /bits/ 64 <1608000000>;
+ opp-microvolt = <762500 762500 1000000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-1800000000 {
+ opp-hz = /bits/ 64 <1800000000>;
+ opp-microvolt = <850000 850000 1000000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-2016000000 {
+ opp-hz = /bits/ 64 <2016000000>;
+ opp-microvolt = <925000 925000 1000000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-2208000000 {
+ opp-hz = /bits/ 64 <2208000000>;
+ opp-microvolt = <987500 987500 1000000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-2256000000 {
+ opp-hz = /bits/ 64 <2256000000>;
+ opp-microvolt = <1000000 1000000 1000000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-2304000000 {
+ opp-hz = /bits/ 64 <2304000000>;
+ opp-microvolt = <1000000 1000000 1000000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-2352000000 {
+ opp-hz = /bits/ 64 <2352000000>;
+ opp-microvolt = <1000000 1000000 1000000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-2400000000 {
+ opp-hz = /bits/ 64 <2400000000>;
+ opp-microvolt = <1000000 1000000 1000000>;
+ clock-latency-ns = <40000>;
+ };
+ };
+
firmware {
optee: optee {
compatible = "linaro,optee-tz";
--
2.43.0
next prev parent reply other threads:[~2024-01-24 20:30 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-24 20:30 [PATCH 0/4] RK3588 and Rock 5B dts additions: thermal, OPP, rfkill and fan Alexey Charkov
2024-01-24 20:30 ` [PATCH 1/4] arm64: dts: rockchip: add rfkill node for M.2 Key E WiFi on rock-5b Alexey Charkov
2024-01-24 20:30 ` [PATCH 2/4] arm64: dts: rockchip: enable built-in thermal monitoring on rk3588 Alexey Charkov
2024-01-24 21:56 ` Daniel Lezcano
2024-01-25 8:26 ` Alexey Charkov
2024-01-25 10:02 ` Daniel Lezcano
2024-01-25 14:46 ` Alexey Charkov
2024-01-25 22:19 ` Dragan Simic
2024-01-25 13:34 ` Diederik de Haas
2024-01-24 20:30 ` [PATCH 3/4] arm64: dts: rockchip: enable temperature driven fan control on Rock 5B Alexey Charkov
2024-01-24 21:59 ` Daniel Lezcano
2024-01-25 23:13 ` Dragan Simic
2024-01-27 20:27 ` Dragan Simic
2024-01-28 20:08 ` Alexey Charkov
2024-01-29 0:46 ` Dragan Simic
2024-01-24 20:30 ` Alexey Charkov [this message]
2024-01-25 9:30 ` [PATCH 4/4] arm64: dts: rockchip: Add OPP data for CPU cores on RK3588 Daniel Lezcano
2024-01-25 10:17 ` Alexey Charkov
2024-01-26 6:32 ` Dragan Simic
2024-01-26 6:44 ` Alexey Charkov
2024-01-26 7:04 ` Dragan Simic
2024-01-26 7:30 ` Alexey Charkov
2024-01-26 7:49 ` Dragan Simic
2024-01-26 12:56 ` Daniel Lezcano
2024-01-26 13:44 ` Alexey Charkov
2024-01-26 20:33 ` Dragan Simic
2024-01-27 19:41 ` Alexey Charkov
2024-01-28 3:35 ` Dragan Simic
2024-01-28 19:14 ` Alexey Charkov
2024-01-29 0:09 ` Dragan Simic
2024-01-29 7:39 ` Dragan Simic
2024-01-28 15:06 ` Daniel Lezcano
2024-01-28 19:32 ` Alexey Charkov
2024-01-26 20:04 ` Dragan Simic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240125-rk-dts-additions-v1-4-5879275db36f@gmail.com \
--to=alchark@gmail.com \
--cc=conor+dt@kernel.org \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=dsimic@manjaro.org \
--cc=heiko@sntech.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).