Re: [PATCH v3 4/4] arm64: dts: rockchip: add regulator info for Kevin digitizer

[Heiko Stuebner <heiko@sntech.de>]

Am Montag, 20. März 2017, 16:53:44 CET schrieb Brian Norris:
> We need to enable this regulator before the digitizer can be used. Wacom
> recommended waiting for 100 ms before talking to the HID.
> 
> Signed-off-by: Brian Norris <briannorris@chromium.org>
> ---
> v3:
>  * reintroduced into patch set; bindings are in linux-next
> ---
>  arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
> b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts index
> 2f720cf2fd07..f4714c4606f3 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
> @@ -232,6 +232,9 @@ ap_i2c_dig: &i2c2 {

according to the hid-over-i2c binding, this should use a special compatible 
like

	compatible = "wacom,w9013", "hid-over-i2c"

As the binding patch is from Caesar, I assume that is the Kevin component and
I can add that myself, just need confirmation that this is actually the correct 
component :-) .


Thanks
Heiko

>  		pinctrl-names = "default";
>  		pinctrl-0 = <&cpu1_dig_irq_l &cpu1_dig_pdct_l>;
> 
> +		vdd-supply = <&p3_3v_dig>;
> +		post-power-on-delay-ms = <100>;
> +
>  		interrupt-parent = <&gpio2>;
>  		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;