From: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
To: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Cc: linux-pm@vger.kernel.org, naveenkrishna.ch@gmail.com,
rui.zhang@intel.com, eduardo.valentin@ti.com,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org,
amit.daniel@samsung.com, kgene.kim@samsung.com,
devicetree@vger.kernel.org, cpgs@samsung.com
Subject: Re: [PATCH 1/3 v6] thermal: samsung: add intclr_fall_shift bit in exynos_tmu_register
Date: Thu, 17 Oct 2013 12:03:50 +0200 [thread overview]
Message-ID: <2064487.sPVcMNRS4J@amdc1032> (raw)
In-Reply-To: <1381979473-7079-1-git-send-email-ch.naveen@samsung.com>
Hi Naveen,
On Thursday, October 17, 2013 08:41:13 AM Naveen Krishna Chatradhi wrote:
> On Exynos5250, the FALL interrupt related en, status and clear bits are
> available at an offset of
> 16 in INTEN, INTSTAT registers and at an offset of
> 12 in INTCLEAR register.
>
> On Exynos5420, the FALL interrupt related en, status and clear bits are
> available at an offset of
> 16 in INTEN, INTSTAT and INTCLEAR registers.
>
> On Exynos5440,
> the FALL_IRQEN bits are at an offset of 4
> and the RISE_IRQEN bits are at an offset of 0
>
> This patch introduces a new bit field intclr_fall_shift to handle the
> offset for exyns5250 and exynos5440
>
> Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
> ---
> Changes since v1:
> Changes since v2:
> Changes since v3:
> None
> Changes since v4:
> Correct the CLEAR_FALL_INT_SHIFT for Exynos5250/Exynos5440
> Changes since v5:
> Modify the commit message
Thank you but v5 had more issues which are not fixed yet. Please see below.
> drivers/thermal/samsung/exynos_tmu.c | 2 +-
> drivers/thermal/samsung/exynos_tmu.h | 2 ++
> drivers/thermal/samsung/exynos_tmu_data.c | 2 ++
> drivers/thermal/samsung/exynos_tmu_data.h | 4 +++-
> 4 files changed, 8 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
> index 32f38b9..b2202fa 100644
> --- a/drivers/thermal/samsung/exynos_tmu.c
> +++ b/drivers/thermal/samsung/exynos_tmu.c
> @@ -265,7 +265,7 @@ skip_calib_data:
> data->base + reg->threshold_th1);
>
> writel((reg->inten_rise_mask << reg->inten_rise_shift) |
> - (reg->inten_fall_mask << reg->inten_fall_shift),
> + (reg->inten_fall_mask << reg->intclr_fall_shift),
> data->base + reg->tmu_intclear);
>
> /* if last threshold limit is also present */
> diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h
> index 3fb6554..5f4fe6c 100644
> --- a/drivers/thermal/samsung/exynos_tmu.h
> +++ b/drivers/thermal/samsung/exynos_tmu.h
> @@ -136,6 +136,7 @@ enum soc_type {
> * @inten_fall3_shift: shift bits of falling 3 interrupt bits.
> * @tmu_intstat: Register containing the interrupt status values.
> * @tmu_intclear: Register for clearing the raised interrupt status.
> + * @intclr_fall_shift: shift bits for interrupt clear fall 0
> * @emul_con: TMU emulation controller register.
> * @emul_temp_shift: shift bits of emulation temperature.
> * @emul_time_shift: shift bits of emulation time.
> @@ -207,6 +208,7 @@ struct exynos_tmu_registers {
> u32 tmu_intstat;
>
> u32 tmu_intclear;
> + u32 intclr_fall_shift;
>
> u32 emul_con;
> u32 emul_temp_shift;
> diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c
> index 073c292..09a8a27 100644
> --- a/drivers/thermal/samsung/exynos_tmu_data.c
> +++ b/drivers/thermal/samsung/exynos_tmu_data.c
> @@ -123,6 +123,7 @@ static const struct exynos_tmu_registers exynos4412_tmu_registers = {
> .inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT,
> .tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
> .tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
> + .intclr_fall_shift = EXYNOS5250_TMU_CLEAR_FALL_INT_SHIFT,
> .emul_con = EXYNOS_EMUL_CON,
> .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
> .emul_time_shift = EXYNOS_EMUL_TIME_SHIFT,
> @@ -228,6 +229,7 @@ static const struct exynos_tmu_registers exynos5440_tmu_registers = {
> .inten_fall0_shift = EXYNOS5440_TMU_INTEN_FALL0_SHIFT,
> .tmu_intstat = EXYNOS5440_TMU_S0_7_IRQ,
> .tmu_intclear = EXYNOS5440_TMU_S0_7_IRQ,
> + .intclr_fall_shift = EXYNOS5440_TMU_CLEAR_FALL_INT_SHIFT,
> .tmu_irqstatus = EXYNOS5440_TMU_IRQ_STATUS,
> .emul_con = EXYNOS5440_TMU_S0_7_DEBUG,
> .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
> diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h
> index a1ea19d..9c1e2c8 100644
> --- a/drivers/thermal/samsung/exynos_tmu_data.h
> +++ b/drivers/thermal/samsung/exynos_tmu_data.h
> @@ -69,9 +69,11 @@
> #define EXYNOS_TMU_RISE_INT_MASK 0x111
> #define EXYNOS_TMU_RISE_INT_SHIFT 0
> #define EXYNOS_TMU_FALL_INT_MASK 0x111
> -#define EXYNOS_TMU_FALL_INT_SHIFT 12
> +#define EXYNOS_TMU_FALL_INT_SHIFT 16
> #define EXYNOS_TMU_CLEAR_RISE_INT 0x111
> #define EXYNOS_TMU_CLEAR_FALL_INT (0x111 << 12)
> +#define EXYNOS5250_TMU_CLEAR_FALL_INT_SHIFT 12
The better name would be EXYNOS_TMU_CLEAR_FALL_INT_SHIFT because it is
also used on EXYNOS4412.
Also in patch #3 you should define EXYNOS5420_TMU_CLEAR_FALL_INT_SHIFT
instead of re-using EXYNOS_TMU_FALL_INT_SHIFT.
Finally please remove no longer used inten_fall_shift field and related
defines (EXYNOS_TMU_FALL_INT_MASK and EXYNOS5440_TMU_FALL_INT_MASK).
Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics
> +#define EXYNOS5440_TMU_CLEAR_FALL_INT_SHIFT 4
> #define EXYNOS_TMU_TRIP_MODE_SHIFT 13
> #define EXYNOS_TMU_TRIP_MODE_MASK 0x7
> #define EXYNOS_TMU_THERM_TRIP_EN_SHIFT 12
next prev parent reply other threads:[~2013-10-17 10:03 UTC|newest]
Thread overview: 98+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-01 6:02 [PATCH] thermal: exynos: Handle the misplaced TRIMINFO register Naveen Krishna Chatradhi
2013-08-01 8:32 ` amit daniel kachhap
2013-08-01 8:48 ` Naveen Krishna Ch
2013-08-01 10:36 ` [PATCH v2] " Naveen Krishna Chatradhi
2013-08-07 6:36 ` amit daniel kachhap
2013-08-07 6:43 ` Naveen Krishna Ch
2013-08-28 5:45 ` [PATCH 0/3] thermal: samsung: Add TMU for Exynos5420 Naveen Krishna Chatradhi
2013-08-28 5:45 ` [PATCH 1/3] thermal: samsung: correct the fall interrupt en, status bit fields Naveen Krishna Chatradhi
2013-08-28 5:57 ` amit daniel kachhap
2013-09-04 4:23 ` Naveen Krishna Chatradhi
2013-09-04 4:23 ` [PATCH 2/3] thermal: samsung: change base_common to more meaningful base_second Naveen Krishna Chatradhi
2013-09-06 4:38 ` amit daniel kachhap
2013-10-17 3:12 ` [PATCH 2/3 v6] " Naveen Krishna Chatradhi
2013-11-06 13:28 ` [PATCH 2/3 v7] " Naveen Krishna Chatradhi
2013-11-07 5:53 ` [PATCH 2/3 v8] " Naveen Krishna Chatradhi
2013-11-12 6:36 ` [PATCH 2/4 v9] " Naveen Krishna Chatradhi
2013-11-18 3:24 ` Naveen Krishna Ch
2013-11-19 13:04 ` [PATCH 2/4 v10] " Naveen Krishna Chatradhi
2013-11-22 8:56 ` Naveen Krishna Ch
2013-12-09 12:48 ` Tomasz Figa
2013-12-10 6:41 ` [PATCH v11 2/4] " Naveen Krishna Chatradhi
2013-12-18 15:51 ` Tomasz Figa
2013-12-19 6:06 ` [PATCH v12 " Naveen Krishna Chatradhi
2014-02-07 9:35 ` Naveen Krishna Ch
2013-09-04 4:23 ` [PATCH 3/3] thermal: samsung: Add TMU support for Exynos5420 SoCs Naveen Krishna Chatradhi
2013-10-03 12:01 ` Naveen Krishna Ch
2013-10-03 12:42 ` Bartlomiej Zolnierkiewicz
2013-10-09 11:45 ` Naveen Krishna Ch
2013-10-09 12:08 ` [PATCH 1/3 v4] thermal: samsung: correct the fall interrupt en, status bit fields Naveen Krishna Chatradhi
2013-10-09 12:08 ` [PATCH 2/3 v4] thermal: samsung: change base_common to more meaningful base_second Naveen Krishna Chatradhi
2013-10-14 13:47 ` Eduardo Valentin
2013-10-09 12:08 ` [PATCH 3/3 v4] thermal: samsung: Add TMU support for Exynos5420 SoCs Naveen Krishna Chatradhi
2013-10-09 14:03 ` [PATCH 1/3 v4] thermal: samsung: correct the fall interrupt en, status bit fields Bartlomiej Zolnierkiewicz
2013-10-11 15:10 ` Eduardo Valentin
2013-10-11 15:57 ` Bartlomiej Zolnierkiewicz
2013-10-14 14:18 ` Eduardo Valentin
2013-10-14 16:01 ` Bartlomiej Zolnierkiewicz
2013-10-15 11:39 ` Naveen Krishna Ch
2013-10-14 13:56 ` Eduardo Valentin
2013-11-06 13:28 ` [PATCH 3/3 v7] thermal: samsung: Add TMU support for Exynos5420 SoCs Naveen Krishna Chatradhi
2013-11-06 13:44 ` Bartlomiej Zolnierkiewicz
2013-11-07 5:53 ` [PATCH 3/3 v8] " Naveen Krishna Chatradhi
2013-11-07 15:09 ` Tomasz Figa
2013-11-12 6:19 ` Naveen Krishna Ch
2013-11-12 6:37 ` [PATCH 3/4 v9] " Naveen Krishna Chatradhi
2013-11-18 3:22 ` Naveen Krishna Ch
2013-11-18 11:27 ` Mark Rutland
2013-12-09 12:43 ` Tomasz Figa
2013-11-19 13:05 ` [PATCH 3/4 v10] " Naveen Krishna Chatradhi
2013-11-22 8:55 ` Naveen Krishna Ch
2013-12-09 12:46 ` Tomasz Figa
2013-12-10 6:42 ` [PATCH v11 3/4] " Naveen Krishna Chatradhi
2013-12-18 15:50 ` Tomasz Figa
2013-12-19 4:44 ` Naveen Krishna Ch
2013-12-19 6:06 ` [PATCH v12 " Naveen Krishna Chatradhi
2013-12-19 11:34 ` Tomasz Figa
2014-02-07 9:34 ` Naveen Krishna Ch
2013-10-17 3:11 ` [PATCH 1/3 v6] thermal: samsung: add intclr_fall_shift bit in exynos_tmu_register Naveen Krishna Chatradhi
2013-10-17 10:03 ` Bartlomiej Zolnierkiewicz [this message]
2013-11-06 13:17 ` Naveen Krishna Ch
2013-11-06 13:36 ` Bartlomiej Zolnierkiewicz
2013-11-06 13:27 ` [PATCH 1/3 v7] " Naveen Krishna Chatradhi
2013-11-07 5:52 ` [PATCH 1/3 v8] thermal: samsung: add intclr_fall_shift bit in exynos_tmu_register struct Naveen Krishna Chatradhi
2013-11-07 10:48 ` Bartlomiej Zolnierkiewicz
2013-11-07 10:58 ` Naveen Krishna Ch
2013-11-07 14:47 ` Tomasz Figa
2013-11-12 6:36 ` [PATCH 1/4 v9] thermal: samsung: replace inten_ bit fields with intclr_ Naveen Krishna Chatradhi
2013-11-18 3:25 ` Naveen Krishna Ch
2013-11-19 13:04 ` [PATCH 1/4 v10] " Naveen Krishna Chatradhi
2013-12-09 12:51 ` Tomasz Figa
2013-12-10 6:41 ` [PATCH v11 1/4] " Naveen Krishna Chatradhi
2013-12-18 15:51 ` Tomasz Figa
2013-12-19 6:05 ` [PATCH v12 " Naveen Krishna Chatradhi
2014-01-02 2:33 ` Zhang Rui
2014-02-07 9:33 ` Naveen Krishna Ch
2014-04-10 12:43 ` Bartlomiej Zolnierkiewicz
2013-08-28 5:45 ` [PATCH 2/3] thermal: samsung: Add TMU support for Exynos5420 SoCs Naveen Krishna Chatradhi
2013-08-28 5:58 ` amit daniel kachhap
2013-08-28 9:28 ` amit daniel kachhap
2013-10-17 3:12 ` [PATCH 3/3 v6] " Naveen Krishna Chatradhi
2013-08-28 5:45 ` [PATCH 3/3] thermal: exynos: Handle the misplaced TRIMINFO register Naveen Krishna Chatradhi
2013-08-28 6:03 ` amit daniel kachhap
2013-08-28 6:19 ` Naveen Krishna Ch
2013-08-28 8:43 ` amit daniel kachhap
2013-08-28 8:57 ` Naveen Krishna Ch
2013-08-28 9:04 ` amit daniel kachhap
2013-08-28 10:06 ` Bartlomiej Zolnierkiewicz
2013-11-12 6:35 ` [PATCH 0/3] thermal: samsung: Clean up and add support for Exynos5420 Naveen Krishna Chatradhi
2013-11-18 3:25 ` Naveen Krishna Ch
2013-12-10 6:40 ` [PATCH v11 0/4] " Naveen Krishna Chatradhi
2014-03-19 11:19 ` Leela Krishna Amudala
2014-03-19 15:58 ` Tomasz Figa
2014-03-20 2:45 ` Naveen Krishna Ch
2014-04-08 9:33 ` Javi Merino
2013-08-28 9:16 ` [PATCH 1/3 v2] thermal: samsung: correct the fall interrupt en, status bit fields Naveen Krishna Chatradhi
2013-08-28 9:16 ` [PATCH 2/3] thermal: samsung: change base_common to more meaningful base_second Naveen Krishna Chatradhi
2013-08-28 9:16 ` [PATCH v2: 3/3] thermal: samsung: Add TMU support for Exynos5420 SoCs Naveen Krishna Chatradhi
2013-08-28 10:38 ` Bartlomiej Zolnierkiewicz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2064487.sPVcMNRS4J@amdc1032 \
--to=b.zolnierkie@samsung.com \
--cc=amit.daniel@samsung.com \
--cc=ch.naveen@samsung.com \
--cc=cpgs@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=eduardo.valentin@ti.com \
--cc=kgene.kim@samsung.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=naveenkrishna.ch@gmail.com \
--cc=rui.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).