linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Mathias Nyman <mathias.nyman@linux.intel.com>
To: Greg KH <gregkh@linuxfoundation.org>,
	Marek Szyprowski <m.szyprowski@samsung.com>
Cc: pmenzel@molgen.mpg.de, mika.westerberg@linux.intel.com,
	linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
	'Linux Samsung SOC' <linux-samsung-soc@vger.kernel.org>,
	Krzysztof Kozlowski <krzk@kernel.org>
Subject: Re: [RFT PATCH] xhci: Fix memory leak when caching protocol extended capability PSI tables
Date: Tue, 11 Feb 2020 16:08:08 +0200	[thread overview]
Message-ID: <20d0559f-8d0f-42f5-5ebf-7f658a172161@linux.intel.com> (raw)
In-Reply-To: <9d314940-086e-d9a7-88e2-88447cd1c67d@linux.intel.com>

On 11.2.2020 14.29, Mathias Nyman wrote:
> On 11.2.2020 14.23, Greg KH wrote:
>> On Tue, Feb 11, 2020 at 11:56:12AM +0100, Marek Szyprowski wrote:
>>> Hi
>>>
>>> On 08.01.2020 16:17, Mathias Nyman wrote:
>>>> xhci driver assumed that xHC controllers have at most one custom
>>>> supported speed table (PSI) for all usb 3.x ports.
>>>> Memory was allocated for one PSI table under the xhci hub structure.
>>>>
>>>> Turns out this is not the case, some controllers have a separate
>>>> "supported protocol capability" entry with a PSI table for each port.
>>>> This means each usb3 port can in theory support different custom speeds.
>>>>
>>>> To solve this cache all supported protocol capabilities with their PSI
>>>> tables in an array, and add pointers to the xhci port structure so that
>>>> every port points to its capability entry in the array.
>>>>
>>>> When creating the SuperSpeedPlus USB Device Capability BOS descriptor
>>>> for the xhci USB 3.1 roothub we for now will use only data from the
>>>> first USB 3.1 capable protocol capability entry in the array.
>>>> This could be improved later, this patch focuses resolving
>>>> the memory leak.
>>>>
>>>> Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
>>>> Reported-by: Sajja Venkateswara Rao <VenkateswaraRao.Sajja@amd.com>
>>>> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
>>>
>>> This patch landed in today's linux-next (20200211) and causes NULL 
>>> pointer dereference during second suspend/resume cycle on Samsung 
>>> Exynos5422-based (arm 32bit) Odroid XU3lite board:
>>>
>>> # time rtcwake -s10 -mmem
>>> rtcwake: wakeup from "mem" using /dev/rtc0 at Tue Feb 11 10:51:43 2020
>>> PM: suspend entry (deep)
>>> Filesystems sync: 0.012 seconds
>>> Freezing user space processes ... (elapsed 0.010 seconds) done.
>>> OOM killer disabled.
>>> Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
>>> smsc95xx 1-1.1:1.0 eth0: entering SUSPEND2 mode
>>> wake enabled for irq 153
>>> wake enabled for irq 158
>>> samsung-pinctrl 13400000.pinctrl: Setting external wakeup interrupt 
>>> mask: 0xffffffe7
>>> Disabling non-boot CPUs ...
>>> IRQ 51: no longer affine to CPU1
>>> IRQ 52: no longer affine to CPU2
>>> s3c2410-wdt 101d0000.watchdog: watchdog disabled
>>> wake disabled for irq 158
>>> usb usb1: root hub lost power or was reset
>>> usb usb2: root hub lost power or was reset
>>> wake disabled for irq 153
>>> exynos-tmu 10060000.tmu: More trip points than supported by this TMU.
>>> exynos-tmu 10060000.tmu: 2 trip points should be configured in polling mode.
>>> exynos-tmu 10064000.tmu: More trip points than supported by this TMU.
>>> exynos-tmu 10064000.tmu: 2 trip points should be configured in polling mode.
>>> exynos-tmu 10068000.tmu: More trip points than supported by this TMU.
>>> exynos-tmu 10068000.tmu: 2 trip points should be configured in polling mode.
>>> exynos-tmu 1006c000.tmu: More trip points than supported by this TMU.
>>> exynos-tmu 1006c000.tmu: 2 trip points should be configured in polling mode.
>>> exynos-tmu 100a0000.tmu: More trip points than supported by this TMU.
>>> exynos-tmu 100a0000.tmu: 6 trip points should be configured in polling mode.
>>> usb usb3: root hub lost power or was reset
>>> s3c-rtc 101e0000.rtc: rtc disabled, re-enabling
>>> usb usb4: root hub lost power or was reset
>>> xhci-hcd xhci-hcd.8.auto: No ports on the roothubs?
>>> PM: dpm_run_callback(): platform_pm_resume+0x0/0x44 returns -12
>>> PM: Device xhci-hcd.8.auto failed to resume async: error -12
>>> hub 3-0:1.0: hub_ext_port_status failed (err = -32)
>>> hub 4-0:1.0: hub_ext_port_status failed (err = -32)
>>> usb 1-1: reset high-speed USB device number 2 using exynos-ehci
>>> usb 1-1.1: reset high-speed USB device number 3 using exynos-ehci
>>> OOM killer enabled.
>>> Restarting tasks ... done.
>>>
>>> real    0m11.890s
>>> user    0m0.001s
>>> sys     0m0.679s
>>> root@target:~# PM: suspend exit
>>> mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, 
>>> actual 396825HZ div = 63)
>>> mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, 
>>> actual 200000000HZ div = 0)
>>> mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, 
>>> actual 50000000HZ div = 0)
>>> mmc_host mmc0: Bus speed (slot 0) = 400000000Hz (slot req 200000000Hz, 
>>> actual 200000000HZ div = 1)
>>> smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1
>>>
>>> root@target:~#
>>> root@target:~# time rtcwake -s10 -mmem[   35.451572] vdd_ldo12: disabling
>>>
>>> rtcwake: wakeup from "mem" using /dev/rtc0 at Tue Feb 11 10:52:02 2020
>>> PM: suspend entry (deep)
>>> Filesystems sync: 0.004 seconds
>>> Freezing user space processes ... (elapsed 0.006 seconds) done.
>>> OOM killer disabled.
>>> Freezing remaining freezable tasks ... (elapsed 0.070 seconds) done.
>>> hub 4-0:1.0: hub_ext_port_status failed (err = -32)
>>> hub 3-0:1.0: hub_ext_port_status failed (err = -32)
>>> 8<--- cut here ---
>>> Unable to handle kernel NULL pointer dereference at virtual address 00000014
>>> pgd = 4c26b54b
>>> [00000014] *pgd=00000000
>>> Internal error: Oops: 17 [#1] PREEMPT SMP ARM
>>> Modules linked in:
>>> CPU: 3 PID: 1468 Comm: kworker/u16:23 Not tainted 
>>> 5.6.0-rc1-next-20200211 #268
>>> Hardware name: Samsung Exynos (Flattened Device Tree)
>>> Workqueue: events_unbound async_run_entry_fn
>>> PC is at xhci_suspend+0x12c/0x520
>>> LR is at 0xa6aa9898
>>> pc : [<c0724c90>]    lr : [<a6aa9898>]    psr: 60000093
>>> sp : ec401df8  ip : 0000001a  fp : c12e7864
>>> r10: 00000000  r9 : ecfb87b0  r8 : ecfb8220
>>> r7 : 00000000  r6 : 00000000  r5 : 00000004  r4 : ecfb81f0
>>> r3 : 00007d00  r2 : 00000001  r1 : 00000001  r0 : 00000000
>>> Flags: nZCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment none
>>> Control: 10c5387d  Table: 6bd4006a  DAC: 00000051
>>> Process kworker/u16:23 (pid: 1468, stack limit = 0x6e4b6fba)
>>> Stack: (0xec401df8 to 0xec402000)
>>> ...
>>> [<c0724c90>] (xhci_suspend) from [<c061b4f4>] (dpm_run_callback+0xb4/0x3fc)
>>> [<c061b4f4>] (dpm_run_callback) from [<c061bd5c>] 
>>> (__device_suspend+0x134/0x7e8)
>>> [<c061bd5c>] (__device_suspend) from [<c061c42c>] (async_suspend+0x1c/0x94)
>>> [<c061c42c>] (async_suspend) from [<c0154bd0>] 
>>> (async_run_entry_fn+0x48/0x1b8)
>>> [<c0154bd0>] (async_run_entry_fn) from [<c0149b38>] 
>>> (process_one_work+0x230/0x7bc)
>>> [<c0149b38>] (process_one_work) from [<c014a108>] (worker_thread+0x44/0x524)
>>> [<c014a108>] (worker_thread) from [<c01511fc>] (kthread+0x130/0x164)
>>> [<c01511fc>] (kthread) from [<c01010b4>] (ret_from_fork+0x14/0x20)
>>> Exception stack(0xec401fb0 to 0xec401ff8)
>>> ...
>>> ---[ end trace c72caf6487666442 ]---
>>> note: kworker/u16:23[1468] exited with preempt_count 1
>>>
>>> Reverting it fixes the NULL pointer issue. I can provide more 
>>> information or do some other tests. Just let me know what will help to 
>>> fix it.
>>>
>>>  > ...
>>
>> Ugh.  Mathias, should I just revert this for now?
>>
> 
> Yes, revert it.
> 
> This looks very odd, after second resume, and losing power driver
> can't find any port at all.
> 
> Marek, do you still get the "xhci-hcd xhci-hcd.8.auto: No ports on the roothubs?"
> message on second resume after reverting the patch?
> 

Ok, I think I got it. 
Patch doesn't set xhci->num_port_caps to 0 in xhci_mem_cleanup().

Adding new ports will fail when we reinitialize xhci manually, like in this
exynos case where xhci loses power in suspend/resume cycle.  

I'll post a new version soon

-Mathias
 


  reply	other threads:[~2020-02-11 14:05 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-07-20  9:44 BUG: KASAN: use-after-free in xhci_trb_virt_to_dma.part.24+0x1c/0x80 Paul Menzel
2018-07-20  9:54 ` Greg KH
2018-07-23 11:23   ` Paul Menzel
2020-01-02 14:10     ` Paul Menzel
2020-01-03 11:04       ` Mika Westerberg
2020-01-07 12:09         ` Mathias Nyman
2020-01-07 15:35           ` Paul Menzel
2020-01-08  9:34             ` Mathias Nyman
2020-01-08 15:17               ` [RFT PATCH] xhci: Fix memory leak when caching protocol extended capability PSI tables Mathias Nyman
2020-01-08 15:40                 ` Greg KH
2020-01-08 15:56                   ` Mathias Nyman
     [not found]                 ` <CGME20200211105613eucas1p27cac4202c4287a5967b2ed988779d523@eucas1p2.samsung.com>
2020-02-11 10:56                   ` Marek Szyprowski
2020-02-11 12:23                     ` Greg KH
2020-02-11 12:29                       ` Mathias Nyman
2020-02-11 14:08                         ` Mathias Nyman [this message]
2020-02-11 15:01                           ` [RFT PATCH v2] " Mathias Nyman
2020-02-11 15:12                             ` Marek Szyprowski
2020-02-11 16:13                               ` Greg KH
2020-02-12  9:01                                 ` Mathias Nyman
2020-02-12 17:51                                   ` Greg KH
2020-02-13 13:33                             ` Jon Hunter
2020-02-14  7:47                               ` Mathias Nyman
2020-02-14  8:35                                 ` Jon Hunter
2020-01-09  8:53         ` BUG: KASAN: use-after-free in xhci_trb_virt_to_dma.part.24+0x1c/0x80 Felipe Balbi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20d0559f-8d0f-42f5-5ebf-7f658a172161@linux.intel.com \
    --to=mathias.nyman@linux.intel.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=krzk@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=m.szyprowski@samsung.com \
    --cc=mika.westerberg@linux.intel.com \
    --cc=pmenzel@molgen.mpg.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).