linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sarthak Garg <quic_sartgarg@quicinc.com>
To: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Andy Gross <agross@kernel.org>,
	Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konrad.dybcio@linaro.org>,
	Adrian Hunter <adrian.hunter@intel.com>,
	<linux-mmc@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-arm-msm@vger.kernel.org>, <quic_cang@quicinc.com>,
	<quic_nguyenb@quicinc.com>, <quic_rampraka@quicinc.com>,
	<quic_pragalla@quicinc.com>, <quic_sayalil@quicinc.com>,
	<quic_nitirawa@quicinc.com>, <quic_sachgupt@quicinc.com>,
	<quic_bhaskarv@quicinc.com>, <quic_narepall@quicinc.com>,
	<kernel@quicinc.com>,
	Veerabhadrarao Badiganti <quic_vbadigan@quicinc.com>
Subject: Re: [PATCH V3 1/3] mmc: core: Add partial initialization support
Date: Fri, 27 Oct 2023 14:11:23 +0530	[thread overview]
Message-ID: <21208de0-79bc-42c7-b32f-355daf5b09f0@quicinc.com> (raw)
In-Reply-To: <CAPDyKFofS16AsQeTVNiDi_PHUatGoQ3no-1+Azo+yqG0SPTe4Q@mail.gmail.com>



On 10/19/2023 8:30 PM, Ulf Hansson wrote:
> On Thu, 19 Oct 2023 at 07:46, Sarthak Garg <quic_sartgarg@quicinc.com> wrote:
>>
>> Add the ability to partially initialize the MMC device by
>> using device sleep/awake sequence (CMD5).
>> Device will be sent to sleep state during mmc runtime/system suspend
>> and will be woken up during mmc runtime/system resume.
>> By using this sequence the device doesn't need full initialization
>> which gives 25% time reduction in system/runtime resume path.
>>
>> 1) Micron eMMC (ManfID 0x13)
>>
>> Partial init                            Full Init
>>
>> a) _mmc_resume:                         _mmc_resume :
>>
>> Total time : 62ms                       Total time : 84ms
>> (Improvement % from full init = ~26%)
>>
>> 2) Kingston eMMC (ManfID 0x70)
>>
>> Partial init                            Full Init
>>
>> a) _mmc_resume:                 _mmc_resume :
>> Total time : 46ms                       Total time : 62ms
>> (Improvement % from full init = ~25%).
>>
>> Co-developed-by: Veerabhadrarao Badiganti <quic_vbadigan@quicinc.com>
>> Signed-off-by: Veerabhadrarao Badiganti <quic_vbadigan@quicinc.com>
>> Signed-off-by: Sarthak Garg <quic_sartgarg@quicinc.com>
>> ---
>>   drivers/mmc/core/mmc.c   | 163 ++++++++++++++++++++++++++++++++++++---
>>   include/linux/mmc/card.h |   4 +
>>   include/linux/mmc/host.h |   2 +
>>   3 files changed, 160 insertions(+), 9 deletions(-)
>>
>> diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
>> index 8180983bd402..fb33bcf6d360 100644
>> --- a/drivers/mmc/core/mmc.c
>> +++ b/drivers/mmc/core/mmc.c
>> @@ -1956,7 +1956,28 @@ static int mmc_sleep_busy_cb(void *cb_data, bool *busy)
>>          return 0;
>>   }
>>
>> -static int mmc_sleep(struct mmc_host *host)
>> +/*
>> + * Returns true if card supports sleep/awake command and host can simply do
>> + * sleep/awake instead of full card initialization as part of resume.
>> + */
>> +static inline int mmc_can_sleepawake(struct mmc_host *host)
> 
> Nitpick: Please rename to mmc_can_sleep_awake() to make the name more clear.

Sure will take care in V4.

> 
>> +{
>> +       return mmc_can_sleep(host->card) && (host->caps2 & MMC_CAP2_SLEEP_AWAKE);
>> +}
>> +
>> +/**
>> + * mmc_sleepawake - function to sleep or awake the device
>> + * @host: MMC host
>> + * @sleep: if true then sleep command is sent else awake
>> + *
>> + * This function first deselects the card and then sends the sleep command
>> + * in case of sleep whereas in case of awake first awake command is send
>> + * and then the card is selected.
>> + *
>> + * Returns 0 on success, non-zero value on failure
>> + */
>> +
>> +static int mmc_sleepawake(struct mmc_host *host, bool sleep)
> 
> Nitpick: Please rename into mmc_sleep_awake()

Sure will take care in V4.

> 
>>   {
>>          struct mmc_command cmd = {};
>>          struct mmc_card *card = host->card;
>> @@ -1967,14 +1988,17 @@ static int mmc_sleep(struct mmc_host *host)
>>          /* Re-tuning can't be done once the card is deselected */
>>          mmc_retune_hold(host);
>>
>> -       err = mmc_deselect_cards(host);
>> -       if (err)
>> -               goto out_release;
>> +       if (sleep) {
>> +               err = mmc_deselect_cards(host);
>> +               if (err)
>> +                       goto out_release;
>> +       }
>>
>>          cmd.opcode = MMC_SLEEP_AWAKE;
>>          cmd.arg = card->rca << 16;
>> -       cmd.arg |= 1 << 15;
>>          use_r1b_resp = mmc_prepare_busy_cmd(host, &cmd, timeout_ms);
>> +       if (sleep)
>> +               cmd.arg |= BIT(15);
> 
> Please move this above the call to mmc_prepare_busy_cmd(). For consistency.
>

Sure will take care in V4.

>>
>>          err = mmc_wait_for_cmd(host, &cmd, 0);
>>          if (err)
>> @@ -1997,6 +2021,9 @@ static int mmc_sleep(struct mmc_host *host)
>>          err = __mmc_poll_for_busy(host, 0, timeout_ms, &mmc_sleep_busy_cb, host);
>>
>>   out_release:
>> +       if (!sleep)
>> +               err = mmc_select_card(card);
>> +
>>          mmc_retune_release(host);
>>          return err;
>>   }
>> @@ -2094,6 +2121,73 @@ static int _mmc_flush_cache(struct mmc_host *host)
>>                          pr_err("%s: cache flush error %d\n",
>>                                 mmc_hostname(host), err);
>>          }
>> +       return err;
>> +}
>> +
>> +/*
>> + * Save read/write fields of ext_csd register that the sw changes
>> + * as part of suspend.
>> + */
>> +static int mmc_save_card_ext_csd(struct mmc_host *host)
>> +{
>> +       int err;
>> +       u8 *ext_csd;
>> +       struct mmc_card *card = host->card;
>> +
>> +       err = mmc_get_ext_csd(card, &ext_csd);
>> +       if (err || !ext_csd) {
>> +               pr_err("%s: %s: mmc_get_ext_csd failed (%d)\n",
>> +                       mmc_hostname(host), __func__, err);
>> +               return err;
>> +       }
>> +
>> +       card->ext_csd.raw_ext_csd_cmdq = ext_csd[EXT_CSD_CMDQ_MODE_EN];
>> +       card->ext_csd.raw_ext_csd_cache_ctrl = ext_csd[EXT_CSD_CACHE_CTRL];
>> +       card->ext_csd.raw_ext_csd_bus_width = ext_csd[EXT_CSD_BUS_WIDTH];
>> +       card->ext_csd.raw_ext_csd_hs_timing = ext_csd[EXT_CSD_HS_TIMING];
>> +
>> +       kfree(ext_csd);
>> +
>> +       return 0;
>> +}
>> +
>> +/*
>> + * Get the ext_csd register from the card post resume and compare with
>> + * read/write fields of ext_csd register that the sw changes.
>> + */
>> +static int mmc_test_awake_ext_csd(struct mmc_host *host)
>> +{
>> +       struct mmc_card *card = host->card;
>> +       u8 *ext_csd;
>> +       int err;
>> +
>> +       err = mmc_get_ext_csd(card, &ext_csd);
>> +       if (err) {
>> +               pr_err("%s: %s: mmc_get_ext_csd failed (%d)\n",
>> +                       mmc_hostname(host), __func__, err);
>> +               return err;
>> +       }
>> +
>> +       pr_debug("%s: %s: type(cached:current) cmdq(%d:%d) cache_ctrl(%d:%d) bus_width (%d:%d) timing(%d:%d)\n",
>> +               mmc_hostname(host), __func__,
>> +               card->ext_csd.raw_ext_csd_cmdq,
>> +               ext_csd[EXT_CSD_CMDQ_MODE_EN],
>> +               card->ext_csd.raw_ext_csd_cache_ctrl,
>> +               ext_csd[EXT_CSD_CACHE_CTRL],
>> +               card->ext_csd.raw_ext_csd_bus_width,
>> +               ext_csd[EXT_CSD_BUS_WIDTH],
>> +               card->ext_csd.raw_ext_csd_hs_timing,
>> +               ext_csd[EXT_CSD_HS_TIMING]);
>> +       err = !((card->ext_csd.raw_ext_csd_cmdq ==
>> +                       ext_csd[EXT_CSD_CMDQ_MODE_EN]) &&
>> +               (card->ext_csd.raw_ext_csd_cache_ctrl ==
>> +                       ext_csd[EXT_CSD_CACHE_CTRL]) &&
>> +               (card->ext_csd.raw_ext_csd_bus_width ==
>> +                       ext_csd[EXT_CSD_BUS_WIDTH]) &&
>> +               (card->ext_csd.raw_ext_csd_hs_timing ==
>> +                       ext_csd[EXT_CSD_HS_TIMING]));
>> +
>> +       kfree(ext_csd);
>>
>>          return err;
>>   }
>> @@ -2117,9 +2211,15 @@ static int _mmc_suspend(struct mmc_host *host, bool is_suspend)
>>              ((host->caps2 & MMC_CAP2_FULL_PWR_CYCLE) || !is_suspend ||
>>               (host->caps2 & MMC_CAP2_FULL_PWR_CYCLE_IN_SUSPEND)))
>>                  err = mmc_poweroff_notify(host->card, notify_type);
>> -       else if (mmc_can_sleep(host->card))
>> -               err = mmc_sleep(host);
>> -       else if (!mmc_host_is_spi(host))
>> +       else if (mmc_can_sleep(host->card)) {
>> +               if (mmc_can_sleepawake(host)) {
>> +                       memcpy(&host->cached_ios, &host->ios, sizeof(host->cached_ios));
>> +                       err = mmc_save_card_ext_csd(host);
> 
> I understand that you want to read/save the ext_csd at suspend to
> read/compare it at resume.
> 
> Although, I don't understand *why* this is needed, can you please clarify?
> 
>> +                       if (err)
>> +                               goto out;
>> +               }
>> +               err = mmc_sleepawake(host, true);
>> +       } else if (!mmc_host_is_spi(host))
>>                  err = mmc_deselect_cards(host);
>>
>>          if (!err) {
>> @@ -2131,6 +2231,39 @@ static int _mmc_suspend(struct mmc_host *host, bool is_suspend)
>>          return err;
>>   }
>>
>> +static int mmc_partial_init(struct mmc_host *host)
> 
> Nitpick: Please rename this into mmc_restore_ios().
> 

Sure will take care in V4.

>> +{
>> +       int err = 0;
>> +       struct mmc_card *card = host->card;
>> +
>> +       mmc_set_bus_width(host, host->cached_ios.bus_width);
>> +       mmc_set_timing(host, host->cached_ios.timing);
>> +       if (host->cached_ios.enhanced_strobe) {
>> +               host->ios.enhanced_strobe = true;
>> +               if (host->ops->hs400_enhanced_strobe)
>> +                       host->ops->hs400_enhanced_strobe(host, &host->ios);
>> +       }
>> +       mmc_set_clock(host, host->cached_ios.clock);
>> +       mmc_set_bus_mode(host, host->cached_ios.bus_mode);
>> +
> 
> Rather than re-using the above APIs and the ->set_ios() callback in
> the host, I believe it would be better to add a new host ops to manage
> all of the above at once instead. Something along the lines of the
> below, would then replace all of the above.
> 
> host->ops->restore_ios(host, &host->cached_ios)
> memcpy(&host->ios, &host->cached_ios, sizeof(host->ios));
> 
> Would that make sense to you too?
> 


I didn't get this completely. Do you mean that we should implement a new 
restore_ios callback (e.g. sdhci_restore_ios) similar to sdhci_set_ios 
and removing all the redundant code from sdhci_set_ios which should 
achieve the behaviour same as calling all the above mmc_set_* API's ?


>> +       if (!mmc_card_hs400es(card) &&
>> +                       (mmc_card_hs200(card) || mmc_card_hs400(card))) {
>> +               err = mmc_execute_tuning(card);
>> +               if (err) {
>> +                       pr_err("%s: %s: Tuning failed (%d)\n",
>> +                               mmc_hostname(host), __func__, err);
> 
> There is already a print being done in mmc_execute_tuning() at
> failure. So, let's drop the above print.
> 

Sure will take care in V4.

>> +                       goto out;
>> +               }
>> +       }
>> +
>> +       err = mmc_test_awake_ext_csd(host);
> 
> Again, I don't get why this is needed, so let's discuss this more.
> 

This is just a safety check added because ext_csd has some W/E_P or
W/C_P registers which gets reset if any HW reset happens to the card.
So this will check for those cases if any other vendor is doing reset as 
part of suspend and compare a subset of those W/E_P and W/C_P registers 
and if they are changed then we will bail out of this partial init 
feature and go for full initialization.
We are also fine with removing this function but just added for the 
above mentioned case.

>> +       if (err)
>> +               pr_debug("%s: %s: fail on ext_csd read (%d)\n",
>> +                       mmc_hostname(host), __func__, err);
>> +out:
>> +       return err;
>> +}
>> +
>>   /*
>>    * Suspend callback
>>    */
>> @@ -2161,7 +2294,19 @@ static int _mmc_resume(struct mmc_host *host)
>>                  goto out;
>>
>>          mmc_power_up(host, host->card->ocr);
>> -       err = mmc_init_card(host, host->card->ocr, host->card);
>> +
>> +       if (mmc_can_sleepawake(host)) {
>> +               err = mmc_sleepawake(host, false);
>> +               if (!err)
>> +                       err = mmc_partial_init(host);
>> +               else
>> +                       pr_err("%s: %s: awake failed (%d), fallback to full init\n",
>> +                               mmc_hostname(host), __func__, err);
> 
> We don't print other errors during resume - and I don't think there is
> any special reason to do it for this case only. Please drop it.
> 

Sure will take care in V4.

>> +       }
>> +
>> +       if (!mmc_can_sleepawake(host) || err)
>> +               err = mmc_init_card(host, host->card->ocr, host->card);
>> +
>>          mmc_card_clr_suspended(host->card);
>>
>>   out:
>> diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
>> index daa2f40d9ce6..fbc832ec6d57 100644
>> --- a/include/linux/mmc/card.h
>> +++ b/include/linux/mmc/card.h
>> @@ -86,6 +86,8 @@ struct mmc_ext_csd {
>>          unsigned int            data_tag_unit_size;     /* DATA TAG UNIT size */
>>          unsigned int            boot_ro_lock;           /* ro lock support */
>>          bool                    boot_ro_lockable;
>> +       u8                      raw_ext_csd_cmdq;       /* 15 */
>> +       u8                      raw_ext_csd_cache_ctrl; /* 33 */
>>          bool                    ffu_capable;    /* Firmware upgrade support */
>>          bool                    cmdq_en;        /* Command Queue enabled */
>>          bool                    cmdq_support;   /* Command Queue supported */
>> @@ -96,7 +98,9 @@ struct mmc_ext_csd {
>>          u8                      raw_partition_support;  /* 160 */
>>          u8                      raw_rpmb_size_mult;     /* 168 */
>>          u8                      raw_erased_mem_count;   /* 181 */
>> +       u8                      raw_ext_csd_bus_width;  /* 183 */
>>          u8                      strobe_support;         /* 184 */
>> +       u8                      raw_ext_csd_hs_timing;  /* 185 */
>>          u8                      raw_ext_csd_structure;  /* 194 */
>>          u8                      raw_card_type;          /* 196 */
>>          u8                      raw_driver_strength;    /* 197 */
>> diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
>> index 2f445c651742..836382a0b2e9 100644
>> --- a/include/linux/mmc/host.h
>> +++ b/include/linux/mmc/host.h
>> @@ -427,6 +427,7 @@ struct mmc_host {
>>   #define MMC_CAP2_CRYPTO                0
>>   #endif
>>   #define MMC_CAP2_ALT_GPT_TEGRA (1 << 28)       /* Host with eMMC that has GPT entry at a non-standard location */
>> +#define MMC_CAP2_SLEEP_AWAKE   (1 << 29)       /* Use Sleep/Awake (CMD5) */
>>
>>          int                     fixed_drv_type; /* fixed driver type for non-removable media */
>>
>> @@ -445,6 +446,7 @@ struct mmc_host {
>>          spinlock_t              lock;           /* lock for claim and bus ops */
>>
>>          struct mmc_ios          ios;            /* current io bus settings */
>> +       struct mmc_ios          cached_ios;
>>
>>          /* group bitfields together to minimize padding */
>>          unsigned int            use_spi_crc:1;
> 
> Kind regards
> Uffe

  reply	other threads:[~2023-10-27  8:43 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-10-19  5:46 [PATCH V3 0/3] mmc: Add partial initialization support Sarthak Garg
2023-10-19  5:46 ` [PATCH V3 1/3] mmc: core: " Sarthak Garg
2023-10-19 15:00   ` Ulf Hansson
2023-10-27  8:41     ` Sarthak Garg [this message]
2023-10-27  9:53       ` Ulf Hansson
2024-01-29  6:50         ` Sarthak Garg
2023-10-19  5:46 ` [PATCH V3 2/3] mmc: sdhci-msm: Enable MMC_CAP_AGGRESSIVE_PM for Qualcomm controllers Sarthak Garg
2023-10-19  5:46 ` [PATCH V3 3/3] mmc: sdhci-msm: Enable MMC_CAP2_SLEEP_AWAKE " Sarthak Garg
  -- strict thread matches above, loose matches on Subject: below --
2023-10-17  6:13 [PATCH V3 0/3] mmc: Add partial initialization support Sarthak Garg
2023-10-17  6:13 ` [PATCH V3 1/3] mmc: core: " Sarthak Garg

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=21208de0-79bc-42c7-b32f-355daf5b09f0@quicinc.com \
    --to=quic_sartgarg@quicinc.com \
    --cc=adrian.hunter@intel.com \
    --cc=agross@kernel.org \
    --cc=andersson@kernel.org \
    --cc=kernel@quicinc.com \
    --cc=konrad.dybcio@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=quic_bhaskarv@quicinc.com \
    --cc=quic_cang@quicinc.com \
    --cc=quic_narepall@quicinc.com \
    --cc=quic_nguyenb@quicinc.com \
    --cc=quic_nitirawa@quicinc.com \
    --cc=quic_pragalla@quicinc.com \
    --cc=quic_rampraka@quicinc.com \
    --cc=quic_sachgupt@quicinc.com \
    --cc=quic_sayalil@quicinc.com \
    --cc=quic_vbadigan@quicinc.com \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).