LKML Archive on lore.kernel.org
 help / color / Atom feed
From: Sibi Sankar <sibis@codeaurora.org>
To: Rakesh Pillai <pillair@codeaurora.org>
Cc: agross@kernel.org, bjorn.andersson@linaro.org, ohad@wizery.com,
	mathieu.poirier@linaro.org, robh+dt@kernel.org,
	p.zabel@pengutronix.de, linux-arm-msm@vger.kernel.org,
	linux-remoteproc@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	pillair=codeaurora.org@codeaurora.org
Subject: Re: [PATCH 2/2] remoteproc: qcom: q6v5_wpss: Add support for sc7280 WPSS
Date: Mon, 15 Mar 2021 19:19:01 +0530
Message-ID: <2156398735b0172095695db6d4181069@codeaurora.org> (raw)
In-Reply-To: <1615361290-19238-3-git-send-email-pillair@codeaurora.org>

On 2021-03-10 12:58, Rakesh Pillai wrote:
> Add support for PIL loading of WPSS processor for SC7280
> WPSS boot will be requested by the wifi driver and hence
> disable auto-boot for WPSS. Also add a separate shutdown
> sequence handler for WPSS.
> 
> Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
> ---
>  drivers/remoteproc/qcom_q6v5_adsp.c | 77 
> ++++++++++++++++++++++++++++++++++++-
>  1 file changed, 76 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/remoteproc/qcom_q6v5_adsp.c
> b/drivers/remoteproc/qcom_q6v5_adsp.c
> index e024502..dc6b91d 100644
> --- a/drivers/remoteproc/qcom_q6v5_adsp.c
> +++ b/drivers/remoteproc/qcom_q6v5_adsp.c
> @@ -58,6 +58,8 @@ struct adsp_pil_data {
>  	const char *ssr_name;
>  	const char *sysmon_name;
>  	int ssctl_id;
> +	bool is_wpss;
> +	bool auto_boot;
> 
>  	const char **clk_ids;
>  	int num_clks;
> @@ -96,8 +98,54 @@ struct qcom_adsp {
>  	struct qcom_rproc_glink glink_subdev;
>  	struct qcom_rproc_ssr ssr_subdev;
>  	struct qcom_sysmon *sysmon;
> +
> +	int (*shutdown)(struct qcom_adsp *adsp);
>  };
> 
> +static int qcom_wpss_shutdown(struct qcom_adsp *adsp)
> +{
> +	unsigned long timeout;
> +	unsigned int val;
> +	int ret;
> +
> +	regmap_write(adsp->halt_map, adsp->halt_lpass + LPASS_HALTREQ_REG, 
> 1);
> +
> +	/* Wait for halt ACK from QDSP6 */
> +	timeout = jiffies + msecs_to_jiffies(ACK_TIMEOUT);
> +	for (;;) {
> +		ret = regmap_read(adsp->halt_map,
> +				  adsp->halt_lpass + LPASS_HALTACK_REG, &val);
> +		if (ret || val || time_after(jiffies, timeout))
> +			break;
> +
> +		usleep_range(1000, 1100);
> +	}

please use regmap_read_poll_timeout
instead.

> +
> +	/* Place the WPSS processor into reset */
> +	reset_control_assert(adsp->restart);
> +	/* wait after asserting subsystem restart from AOSS */
> +	usleep_range(100, 105);
> +	/* Remove the WPSS reset */
> +	reset_control_deassert(adsp->restart);
> +
> +	usleep_range(100, 105);

usleep shouldn't be required since
aoss-reset drivers put in a usleep
of 200-300 on reset assert and de-assert.

> +
> +	regmap_write(adsp->halt_map, adsp->halt_lpass + LPASS_HALTREQ_REG, 
> 0);
> +
> +	/* Wait for halt ACK from QDSP6 */
> +	timeout = jiffies + msecs_to_jiffies(ACK_TIMEOUT);
> +	for (;;) {
> +		ret = regmap_read(adsp->halt_map,
> +				  adsp->halt_lpass + LPASS_HALTACK_REG, &val);
> +		if (ret || !val || time_after(jiffies, timeout))
> +			break;
> +
> +		usleep_range(1000, 1100);
> +	}

please use regmap_read_poll_timeout
instead.

> +
> +	return 0;
> +}
> +
>  static int qcom_adsp_shutdown(struct qcom_adsp *adsp)
>  {
>  	unsigned long timeout;
> @@ -270,7 +318,7 @@ static int adsp_stop(struct rproc *rproc)
>  	if (ret == -ETIMEDOUT)
>  		dev_err(adsp->dev, "timed out on wait\n");
> 
> -	ret = qcom_adsp_shutdown(adsp);
> +	ret = adsp->shutdown(adsp);
>  	if (ret)
>  		dev_err(adsp->dev, "failed to shutdown: %d\n", ret);
> 
> @@ -439,6 +487,8 @@ static int adsp_probe(struct platform_device *pdev)
>  		dev_err(&pdev->dev, "unable to allocate remoteproc\n");
>  		return -ENOMEM;
>  	}
> +
> +	rproc->auto_boot = desc->auto_boot;
>  	rproc_coredump_set_elf_info(rproc, ELFCLASS32, EM_NONE);
> 
>  	adsp = (struct qcom_adsp *)rproc->priv;
> @@ -447,6 +497,11 @@ static int adsp_probe(struct platform_device 
> *pdev)
>  	adsp->info_name = desc->sysmon_name;
>  	platform_set_drvdata(pdev, adsp);
> 
> +	if (desc->is_wpss)
> +		adsp->shutdown = qcom_wpss_shutdown;
> +	else
> +		adsp->shutdown = qcom_adsp_shutdown;
> +
>  	ret = adsp_alloc_memory_region(adsp);
>  	if (ret)
>  		goto free_rproc;
> @@ -515,6 +570,8 @@ static const struct adsp_pil_data 
> adsp_resource_init = {
>  	.ssr_name = "lpass",
>  	.sysmon_name = "adsp",
>  	.ssctl_id = 0x14,
> +	.is_wpss = false,
> +	.auto_boot = true;
>  	.clk_ids = (const char*[]) {
>  		"sway_cbcr", "lpass_ahbs_aon_cbcr", "lpass_ahbm_aon_cbcr",
>  		"qdsp6ss_xo", "qdsp6ss_sleep", "qdsp6ss_core", NULL
> @@ -528,6 +585,8 @@ static const struct adsp_pil_data 
> cdsp_resource_init = {
>  	.ssr_name = "cdsp",
>  	.sysmon_name = "cdsp",
>  	.ssctl_id = 0x17,
> +	.is_wpss = false,
> +	.auto_boot = true;
>  	.clk_ids = (const char*[]) {
>  		"sway", "tbu", "bimc", "ahb_aon", "q6ss_slave", "q6ss_master",
>  		"q6_axim", NULL
> @@ -535,7 +594,23 @@ static const struct adsp_pil_data 
> cdsp_resource_init = {
>  	.num_clks = 7,
>  };
> 
> +static const struct adsp_pil_data wpss_resource_init = {
> +	.crash_reason_smem = 626,
> +	.firmware_name = "wpss.mdt",
> +	.ssr_name = "wpss",
> +	.sysmon_name = "wpss",
> +	.ssctl_id = 0x19,
> +	.is_wpss = true,
> +	.auto_boot = false;
> +	.clk_ids = (const char*[]) {
> +		"gcc_wpss_ahb_bdg_mst_clk", "gcc_wpss_ahb_clk",
> +		"gcc_wpss_rscp_clk", NULL
> +	},
> +	.num_clks = 3,
> +};
> +
>  static const struct of_device_id adsp_of_match[] = {
> +	{ .compatible = "qcom,sc7280-wpss-pil", .data = &wpss_resource_init 
> },

should be in sort order.

>  	{ .compatible = "qcom,qcs404-cdsp-pil", .data = &cdsp_resource_init 
> },
>  	{ .compatible = "qcom,sdm845-adsp-pil", .data = &adsp_resource_init 
> },
>  	{ },

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project.

      parent reply index

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-10  7:28 [PATCH 0/2] Add support for sc7280 WPSS PIL loading Rakesh Pillai
2021-03-10  7:28 ` [PATCH 1/2] dt-bindings: remoteproc: qcom: Add SC7280 WPSS support Rakesh Pillai
2021-03-10 16:47   ` Bjorn Andersson
2021-03-15 13:38   ` Sibi Sankar
2021-03-16 22:33   ` Rob Herring
2021-03-10  7:28 ` [PATCH 2/2] remoteproc: qcom: q6v5_wpss: Add support for sc7280 WPSS Rakesh Pillai
2021-03-10 16:44   ` Bjorn Andersson
2021-03-15 12:08     ` Rakesh Pillai
2021-03-15 13:49   ` Sibi Sankar [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2156398735b0172095695db6d4181069@codeaurora.org \
    --to=sibis@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=mathieu.poirier@linaro.org \
    --cc=ohad@wizery.com \
    --cc=p.zabel@pengutronix.de \
    --cc=pillair=codeaurora.org@codeaurora.org \
    --cc=pillair@codeaurora.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git
	git clone --mirror https://lore.kernel.org/lkml/9 lkml/git/9.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git