linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Rafael J. Wysocki" <rjw@rjwysocki.net>
To: Linux ACPI <linux-acpi@vger.kernel.org>
Cc: Linux PM <linux-pm@vger.kernel.org>,
	LKML <linux-kernel@vger.kernel.org>,
	Zhang Rui <rui.zhang@intel.com>,
	Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>,
	Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	Mario Limonciello <mario.limonciello@dell.com>,
	Kai-Heng Feng <kai.heng.feng@canonical.com>
Subject: [PATCH v3 3/8] ACPI: PM: s2idle: Add acpi.sleep_no_lps0 module parameter
Date: Fri, 02 Aug 2019 12:38:40 +0200	[thread overview]
Message-ID: <2163806.ECDdQTgCPu@kreacher> (raw)
In-Reply-To: <5997740.FPbUVk04hV@kreacher>

From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Add a module parameter to prevent the ACPI LPS0 _DSM functions
from being invoked (if need be) and rework the suspend-to-idle
blacklist entries in acpisleep_dmi_table[] to make them simply
prevent suspend-to-idle from being used by default on the systems
in question (which really is the original purpose of those entries).

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---

In v2 this was patch 4.

---
 drivers/acpi/sleep.c |   31 +++++++++++++++----------------
 1 file changed, 15 insertions(+), 16 deletions(-)

Index: linux-pm/drivers/acpi/sleep.c
===================================================================
--- linux-pm.orig/drivers/acpi/sleep.c
+++ linux-pm/drivers/acpi/sleep.c
@@ -89,6 +89,10 @@ bool acpi_sleep_state_supported(u8 sleep
 }
 
 #ifdef CONFIG_ACPI_SLEEP
+static bool sleep_no_lps0 __read_mostly;
+module_param(sleep_no_lps0, bool, 0644);
+MODULE_PARM_DESC(sleep_no_lps0, "Do not use the special LPS0 device interface");
+
 static u32 acpi_target_sleep_state = ACPI_STATE_S0;
 
 u32 acpi_target_system_state(void)
@@ -158,11 +162,11 @@ static int __init init_nvs_nosave(const
 	return 0;
 }
 
-static bool acpi_sleep_no_lps0;
+static bool acpi_sleep_default_s3;
 
-static int __init init_no_lps0(const struct dmi_system_id *d)
+static int __init init_default_s3(const struct dmi_system_id *d)
 {
-	acpi_sleep_no_lps0 = true;
+	acpi_sleep_default_s3 = true;
 	return 0;
 }
 
@@ -363,7 +367,7 @@ static const struct dmi_system_id acpisl
 	 * S0 Idle firmware interface.
 	 */
 	{
-	.callback = init_no_lps0,
+	.callback = init_default_s3,
 	.ident = "Dell XPS13 9360",
 	.matches = {
 		DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
@@ -376,7 +380,7 @@ static const struct dmi_system_id acpisl
 	 * https://bugzilla.kernel.org/show_bug.cgi?id=199057).
 	 */
 	{
-	.callback = init_no_lps0,
+	.callback = init_default_s3,
 	.ident = "ThinkPad X1 Tablet(2016)",
 	.matches = {
 		DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
@@ -524,8 +528,9 @@ static void acpi_pm_end(void)
 	acpi_sleep_tts_switch(acpi_target_sleep_state);
 }
 #else /* !CONFIG_ACPI_SLEEP */
+#define sleep_no_lps0	(1)
 #define acpi_target_sleep_state	ACPI_STATE_S0
-#define acpi_sleep_no_lps0	(false)
+#define acpi_sleep_default_s3	(1)
 static inline void acpi_sleep_dmi_check(void) {}
 #endif /* CONFIG_ACPI_SLEEP */
 
@@ -904,12 +909,6 @@ static int lps0_device_attach(struct acp
 	if (lps0_device_handle)
 		return 0;
 
-	if (acpi_sleep_no_lps0) {
-		acpi_handle_info(adev->handle,
-				 "Low Power S0 Idle interface disabled\n");
-		return 0;
-	}
-
 	if (!(acpi_gbl_FADT.flags & ACPI_FADT_LOW_POWER_S0))
 		return 0;
 
@@ -937,7 +936,7 @@ static int lps0_device_attach(struct acp
 	 * Use suspend-to-idle by default if the default suspend mode was not
 	 * set from the command line.
 	 */
-	if (mem_sleep_default > PM_SUSPEND_MEM)
+	if (mem_sleep_default > PM_SUSPEND_MEM && !acpi_sleep_default_s3)
 		mem_sleep_current = PM_SUSPEND_TO_IDLE;
 
 	return 0;
@@ -957,7 +956,7 @@ static int acpi_s2idle_begin(void)
 
 static int acpi_s2idle_prepare(void)
 {
-	if (lps0_device_handle) {
+	if (lps0_device_handle && !sleep_no_lps0) {
 		acpi_sleep_run_lps0_dsm(ACPI_LPS0_SCREEN_OFF);
 		acpi_sleep_run_lps0_dsm(ACPI_LPS0_ENTRY);
 	}
@@ -977,7 +976,7 @@ static int acpi_s2idle_prepare(void)
 
 static void acpi_s2idle_wake(void)
 {
-	if (lps0_device_handle && pm_debug_messages_on)
+	if (lps0_device_handle && !sleep_no_lps0 && pm_debug_messages_on)
 		lpi_check_constraints();
 
 	/*
@@ -1025,7 +1024,7 @@ static void acpi_s2idle_restore(void)
 	if (acpi_sci_irq_valid())
 		disable_irq_wake(acpi_sci_irq);
 
-	if (lps0_device_handle) {
+	if (lps0_device_handle && !sleep_no_lps0) {
 		acpi_sleep_run_lps0_dsm(ACPI_LPS0_EXIT);
 		acpi_sleep_run_lps0_dsm(ACPI_LPS0_SCREEN_ON);
 	}




  parent reply	other threads:[~2019-08-02 10:46 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-02 10:33 [PATCH v3 0/8] PM / ACPI: sleep: Additional changes related to suspend-to-idle Rafael J. Wysocki
2019-08-02 10:38 ` [PATCH v3 1/8] ACPI: PM: Set up EC GPE for system wakeup from drivers that need it Rafael J. Wysocki
2019-08-02 10:38 ` [PATCH v3 2/8] ACPI: PM: s2idle: Rearrange lps0_device_attach() Rafael J. Wysocki
2019-08-02 10:38 ` Rafael J. Wysocki [this message]
2019-08-02 10:40 ` [PATCH v3 4/8] ACPI: PM: s2idle: Switch EC over to polling during "noirq" suspend Rafael J. Wysocki
2019-08-02 10:41 ` [PATCH v3 5/8] ACPI: PM: s2idle: Eliminate acpi_sleep_no_ec_events() Rafael J. Wysocki
2019-08-02 10:43 ` [PATCH v3 6/8] ACPI: EC: PM: Consolidate some code depending on PM_SLEEP Rafael J. Wysocki
2019-08-02 10:44 ` [PATCH v3 7/8] ACPI: EC: PM: Make acpi_ec_dispatch_gpe() print debug message Rafael J. Wysocki
2019-08-02 10:45 ` [PATCH v3 8/8] ACPI: PM: s2idle: Execute LPS0 _DSM functions with suspended devices Rafael J. Wysocki
     [not found]   ` <CGME20190809120052eucas1p11b56806662ef4f4efb82a152ad651481@eucas1p1.samsung.com>
2019-08-09 12:00     ` Marek Szyprowski
2019-08-09 12:15       ` Rafael J. Wysocki
2019-08-10 11:24       ` [PATCH] PM: suspend: Fix platform_suspend_prepare_noirq() Rafael J. Wysocki
2019-08-05 16:25 ` [PATCH v3 0/8] PM / ACPI: sleep: Additional changes related to suspend-to-idle Kai-Heng Feng
2019-08-12 13:55 ` Bhardwaj, Rajneesh
2019-08-12 21:32   ` Rafael J. Wysocki
2019-08-16 20:20 ` Kristian Klausen
2019-08-19  7:59   ` Rafael J. Wysocki
2019-08-19  9:05     ` Rafael J. Wysocki
2019-08-19 15:45       ` Kristian Klausen
2019-08-19 20:41         ` Rafael J. Wysocki
2019-08-20 13:10           ` Kristian Klausen
2019-08-20 13:29             ` Rafael J. Wysocki
2019-08-20 21:38               ` Rafael J. Wysocki
2019-08-20 22:47                 ` Kristian Klausen
2019-08-21  7:30                   ` Rafael J. Wysocki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2163806.ECDdQTgCPu@kreacher \
    --to=rjw@rjwysocki.net \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=kai.heng.feng@canonical.com \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=mario.limonciello@dell.com \
    --cc=rajneesh.bhardwaj@linux.intel.com \
    --cc=rui.zhang@intel.com \
    --subject='Re: [PATCH v3 3/8] ACPI: PM: s2idle: Add acpi.sleep_no_lps0 module parameter' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).