From: Sibi Sankar <sibis@codeaurora.org>
To: Rakesh Pillai <pillair@codeaurora.org>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-kernel-owner@vger.kernel.org
Subject: Re: [PATCH v11] arm64: dts: qcom: sc7180: Add WCN3990 WLAN module device node
Date: Wed, 20 May 2020 23:20:27 +0530 [thread overview]
Message-ID: <2174d6b5ab066cf6fd080b5d3c27609f@codeaurora.org> (raw)
In-Reply-To: <1589946996-31264-1-git-send-email-pillair@codeaurora.org>
On 2020-05-20 09:26, Rakesh Pillai wrote:
> Add device node for the ath10k SNOC platform driver probe
> and add resources required for WCN3990 on sc7180 soc.
>
> Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
> ---
> Changes from v10:
> - Corrected the position of wifi node, as per address
> - Removed the wlan_fw_mem from reserved memory, since
> its already added as reserved memory in board DT file.
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
> ---
> arch/arm64/boot/dts/qcom/sc7180-idp.dts | 7 +++++++
> arch/arm64/boot/dts/qcom/sc7180.dtsi | 22 ++++++++++++++++++++++
> 2 files changed, 29 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> index 4e9149d..38b102e 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> +++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> @@ -389,6 +389,13 @@
> };
> };
>
> +&wifi {
> + status = "okay";
> + wifi-firmware {
> + iommus = <&apps_smmu 0xc2 0x1>;
> + };
> +};
> +
> /* PINCTRL - additions to nodes defined in sc7180.dtsi */
>
> &qspi_clk {
> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> index 6b12c60..da79f8f 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> @@ -2811,6 +2811,28 @@
>
> #freq-domain-cells = <1>;
> };
> +
> + wifi: wifi@18800000 {
> + compatible = "qcom,wcn3990-wifi";
> + reg = <0 0x18800000 0 0x800000>;
> + reg-names = "membase";
> + iommus = <&apps_smmu 0xc0 0x1>;
> + interrupts =
> + <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH /* CE0 */ >,
> + <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH /* CE1 */ >,
> + <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH /* CE2 */ >,
> + <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH /* CE3 */ >,
> + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH /* CE4 */ >,
> + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH /* CE5 */ >,
> + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH /* CE6 */ >,
> + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH /* CE7 */ >,
> + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH /* CE8 */ >,
> + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH /* CE9 */ >,
> + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH /* CE10 */>,
> + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH /* CE11 */>;
> + memory-region = <&wlan_mem>;
> + status = "disabled";
> + };
> };
>
> thermal-zones {
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project.
next prev parent reply other threads:[~2020-05-20 17:50 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-20 3:56 [PATCH v11] arm64: dts: qcom: sc7180: Add WCN3990 WLAN module device node Rakesh Pillai
2020-05-20 17:50 ` Sibi Sankar [this message]
2020-05-21 16:19 ` Evan Green
2020-06-17 22:45 ` Evan Green
2020-06-20 14:44 ` Rakesh Pillai
2020-06-21 19:06 ` Bjorn Andersson
2020-06-22 9:16 ` Rakesh Pillai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2174d6b5ab066cf6fd080b5d3c27609f@codeaurora.org \
--to=sibis@codeaurora.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel-owner@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pillair@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).