From: <quic_vamslank@quicinc.com> To: <agross@kernel.org>, <bjorn.andersson@linaro.org>, <mturquette@baylibre.com>, <sboyd@kernel.org>, <robh+dt@kernel.org>, <tglx@linutronix.de>, <maz@kernel.org> Cc: <linux-arm-msm@vger.kernel.org>, <linux-clk@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>, "Vamsi Krishna Lanka" <quic_vamslank@quicinc.com> Subject: [PATCH v2 2/6] clk: qcom: Add new PLL type for SDX65 Date: Thu, 22 Jul 2021 14:09:39 -0700 [thread overview] Message-ID: <223a1d8020d50c35ff2621f95d69b4a626b6893b.1626986805.git.quic_vamslank@quicinc.com> (raw) In-Reply-To: <cover.1626986805.git.quic_vamslank@quicinc.com> From: Vamsi Krishna Lanka <quic_vamslank@quicinc.com> Add a new PLL type for SDX65 SoC from Qualcomm. Signed-off-by: Vamsi Krishna Lanka <quic_vamslank@quicinc.com> --- drivers/clk/qcom/clk-alpha-pll.c | 170 +++++++++++++++++++++++++++++++ drivers/clk/qcom/clk-alpha-pll.h | 4 + 2 files changed, 174 insertions(+) diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c index c6eb99169ddc..93c8917b7273 100644 --- a/drivers/clk/qcom/clk-alpha-pll.c +++ b/drivers/clk/qcom/clk-alpha-pll.c @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* + * Copyright (c) 2021, Qualcomm Innovation Center, Inc. All rights reserved. * Copyright (c) 2015, 2018, The Linux Foundation. All rights reserved. */ @@ -126,6 +127,20 @@ const u8 clk_alpha_pll_regs[][PLL_OFF_MAX_REGS] = { [PLL_OFF_TEST_CTL_U] = 0x1c, [PLL_OFF_STATUS] = 0x2c, }, + [CLK_ALPHA_PLL_TYPE_LUCID_EVO] = { + [PLL_OFF_OPMODE] = 0x04, + [PLL_OFF_STATUS] = 0x0c, + [PLL_OFF_L_VAL] = 0x10, + [PLL_OFF_ALPHA_VAL] = 0x14, + [PLL_OFF_USER_CTL] = 0x18, + [PLL_OFF_USER_CTL_U] = 0x1c, + [PLL_OFF_CONFIG_CTL] = 0x20, + [PLL_OFF_CONFIG_CTL_U] = 0x24, + [PLL_OFF_CONFIG_CTL_U1] = 0x28, + [PLL_OFF_TEST_CTL] = 0x2c, + [PLL_OFF_TEST_CTL_U] = 0x30, + [PLL_OFF_TEST_CTL_U1] = 0x34, + }, }; EXPORT_SYMBOL_GPL(clk_alpha_pll_regs); @@ -155,12 +170,14 @@ EXPORT_SYMBOL_GPL(clk_alpha_pll_regs); /* LUCID PLL specific settings and offsets */ #define LUCID_PCAL_DONE BIT(27) +#define LUCID_EVO_PLL_L_VAL_MASK GENMASK(15, 0) /* LUCID 5LPE PLL specific settings and offsets */ #define LUCID_5LPE_PCAL_DONE BIT(11) #define LUCID_5LPE_ALPHA_PLL_ACK_LATCH BIT(13) #define LUCID_5LPE_PLL_LATCH_INPUT BIT(14) #define LUCID_5LPE_ENABLE_VOTE_RUN BIT(21) +#define LUCID_EVO_ENABLE_VOTE_RUN BIT(25) #define pll_alpha_width(p) \ ((PLL_ALPHA_VAL_U(p) - PLL_ALPHA_VAL(p) == 4) ? \ @@ -1777,3 +1794,156 @@ const struct clk_ops clk_alpha_pll_postdiv_lucid_5lpe_ops = { .set_rate = clk_lucid_5lpe_pll_postdiv_set_rate, }; EXPORT_SYMBOL(clk_alpha_pll_postdiv_lucid_5lpe_ops); + +static int alpha_pll_lucid_evo_enable(struct clk_hw *hw) +{ + struct clk_alpha_pll *pll = to_clk_alpha_pll(hw); + u32 val; + int ret; + + ret = regmap_read(pll->clkr.regmap, PLL_USER_CTL(pll), &val); + if (ret) + return ret; + + /* If in FSM mode, just vote for it */ + if (val & LUCID_EVO_ENABLE_VOTE_RUN) { + ret = clk_enable_regmap(hw); + if (ret) + return ret; + return wait_for_pll_enable_lock(pll); + } + + /* Check if PLL is already enabled */ + ret = trion_pll_is_enabled(pll, pll->clkr.regmap); + if (ret < 0) + return ret; + else if (ret) { + pr_warn("%s PLL is already enabled\n", + clk_hw_get_name(&pll->clkr.hw)); + return 0; + } + + ret = regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), + PLL_RESET_N, PLL_RESET_N); + if (ret) + return ret; + + /* Set operation mode to RUN */ + regmap_write(pll->clkr.regmap, PLL_OPMODE(pll), PLL_RUN); + + ret = wait_for_pll_enable_lock(pll); + if (ret) + return ret; + + /* Enable the PLL outputs */ + ret = regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll), + PLL_OUT_MASK, PLL_OUT_MASK); + if (ret) + return ret; + + /* Enable the global PLL outputs */ + ret = regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), + PLL_OUTCTRL, PLL_OUTCTRL); + if (ret) + return ret; + + /* Ensure that the write above goes through before returning. */ + mb(); + return ret; +} + +static void alpha_pll_lucid_evo_disable(struct clk_hw *hw) +{ + struct clk_alpha_pll *pll = to_clk_alpha_pll(hw); + u32 val; + int ret; + + ret = regmap_read(pll->clkr.regmap, PLL_USER_CTL(pll), &val); + if (ret) + return; + + /* If in FSM mode, just unvote it */ + if (val & LUCID_EVO_ENABLE_VOTE_RUN) { + clk_disable_regmap(hw); + return; + } + + /* Disable the global PLL output */ + ret = regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), + PLL_OUTCTRL, 0); + if (ret) + return; + + /* Disable the PLL outputs */ + ret = regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll), + PLL_OUT_MASK, 0); + if (ret) + return; + + /* Place the PLL mode in STANDBY */ + regmap_write(pll->clkr.regmap, PLL_OPMODE(pll), + PLL_STANDBY); +} + +static unsigned long alpha_pll_lucid_evo_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) +{ + struct clk_alpha_pll *pll = to_clk_alpha_pll(hw); + u32 l, frac; + + regmap_read(pll->clkr.regmap, PLL_L_VAL(pll), &l); + l &= LUCID_EVO_PLL_L_VAL_MASK; + regmap_read(pll->clkr.regmap, PLL_ALPHA_VAL(pll), &frac); + + return alpha_pll_calc_rate(parent_rate, l, frac, ALPHA_REG_16BIT_WIDTH); +} + +static int clk_lucid_evo_pll_postdiv_set_rate(struct clk_hw *hw, + unsigned long rate, unsigned long parent_rate) +{ + struct clk_alpha_pll_postdiv *pll = to_clk_alpha_pll_postdiv(hw); + int i, val = 0, div, ret; + + /* + * If the PLL is in FSM mode, then treat set_rate callback as a + * no-operation. + */ + ret = regmap_read(pll->clkr.regmap, PLL_USER_CTL(pll), &val); + if (ret) + return ret; + + if (val & LUCID_EVO_ENABLE_VOTE_RUN) + return 0; + + if (!pll->post_div_table) { + pr_err("Missing the post_div_table for the PLL\n"); + return -EINVAL; + } + + div = DIV_ROUND_UP_ULL((u64)parent_rate, rate); + for (i = 0; i < pll->num_post_div; i++) { + if (pll->post_div_table[i].div == div) { + val = pll->post_div_table[i].val; + break; + } + } + + return regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll), + (BIT(pll->width) - 1) << pll->post_div_shift, + val << pll->post_div_shift); +} + +const struct clk_ops clk_alpha_pll_fixed_lucid_evo_ops = { + .enable = alpha_pll_lucid_evo_enable, + .disable = alpha_pll_lucid_evo_disable, + .is_enabled = clk_trion_pll_is_enabled, + .recalc_rate = alpha_pll_lucid_evo_recalc_rate, + .round_rate = clk_alpha_pll_round_rate, +}; +EXPORT_SYMBOL_GPL(clk_alpha_pll_fixed_lucid_evo_ops); + +const struct clk_ops clk_alpha_pll_postdiv_lucid_evo_ops = { + .recalc_rate = clk_alpha_pll_postdiv_fabia_recalc_rate, + .round_rate = clk_alpha_pll_postdiv_fabia_round_rate, + .set_rate = clk_lucid_evo_pll_postdiv_set_rate, +}; +EXPORT_SYMBOL_GPL(clk_alpha_pll_postdiv_lucid_evo_ops); diff --git a/drivers/clk/qcom/clk-alpha-pll.h b/drivers/clk/qcom/clk-alpha-pll.h index 6943e933be0f..c42299bf6f6f 100644 --- a/drivers/clk/qcom/clk-alpha-pll.h +++ b/drivers/clk/qcom/clk-alpha-pll.h @@ -16,6 +16,7 @@ enum { CLK_ALPHA_PLL_TYPE_TRION, CLK_ALPHA_PLL_TYPE_LUCID = CLK_ALPHA_PLL_TYPE_TRION, CLK_ALPHA_PLL_TYPE_AGERA, + CLK_ALPHA_PLL_TYPE_LUCID_EVO, CLK_ALPHA_PLL_TYPE_MAX, }; @@ -148,6 +149,9 @@ extern const struct clk_ops clk_alpha_pll_lucid_5lpe_ops; extern const struct clk_ops clk_alpha_pll_fixed_lucid_5lpe_ops; extern const struct clk_ops clk_alpha_pll_postdiv_lucid_5lpe_ops; +extern const struct clk_ops clk_alpha_pll_fixed_lucid_evo_ops; +extern const struct clk_ops clk_alpha_pll_postdiv_lucid_evo_ops; + void clk_alpha_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap, const struct alpha_pll_config *config); void clk_fabia_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap, -- 2.32.0
next prev parent reply other threads:[~2021-07-22 21:10 UTC|newest] Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-07-22 21:09 [PATCH v2 0/6] Add Pdc, GCC and RPMh clock support " quic_vamslank 2021-07-22 21:09 ` [PATCH v2 1/6] dt-bindings: clock: Add SDX65 GCC clock bindings quic_vamslank 2021-07-23 14:31 ` Rob Herring 2021-07-22 21:09 ` quic_vamslank [this message] 2021-07-30 0:35 ` [PATCH v2 2/6] clk: qcom: Add new PLL type for SDX65 Taniya Das 2021-07-30 2:39 ` Vinod Koul 2021-07-22 21:09 ` [PATCH v2 3/6] clk: qcom: Add SDX65 GCC support quic_vamslank 2021-07-22 21:09 ` [PATCH v2 4/6] dt-bindings: clock: Introduce RPMHCC bindings for SDX65 quic_vamslank 2021-07-29 20:07 ` Rob Herring 2021-07-22 21:09 ` [PATCH v2 5/6] clk: qcom: Add support for SDX65 RPMh clocks quic_vamslank 2021-07-30 0:41 ` Taniya Das 2021-07-22 21:09 ` [PATCH v2 6/6] dt-bindings: clock: Introduce pdc bindings for SDX65 quic_vamslank 2021-07-29 20:08 ` Rob Herring 2021-07-31 7:46 ` Stephen Boyd
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=223a1d8020d50c35ff2621f95d69b4a626b6893b.1626986805.git.quic_vamslank@quicinc.com \ --to=quic_vamslank@quicinc.com \ --cc=agross@kernel.org \ --cc=bjorn.andersson@linaro.org \ --cc=devicetree@vger.kernel.org \ --cc=linux-arm-msm@vger.kernel.org \ --cc=linux-clk@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=maz@kernel.org \ --cc=mturquette@baylibre.com \ --cc=robh+dt@kernel.org \ --cc=sboyd@kernel.org \ --cc=tglx@linutronix.de \ --subject='Re: [PATCH v2 2/6] clk: qcom: Add new PLL type for SDX65' \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).