From: Sanchayan Maity <maitysanchayan@gmail.com>
To: shawnguo@kernel.org
Cc: marcel.ziswiler@toradex.com, stefan@agner.ch,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Sanchayan Maity <maitysanchayan@gmail.com>
Subject: [PATCH v2 1/3] ARM: dts: imx6qdl-apalis: Do not rely on DDC I2C bus bitbang for HDMI
Date: Mon, 19 Sep 2016 10:41:51 +0530 [thread overview]
Message-ID: <2263d508999ada9476268138b2922702eb50131f.1474260360.git.maitysanchayan@gmail.com> (raw)
Remove the use of DDC I2C bus bitbang to support reading of EDID
and rely on support from internal HDMI I2C master controller instead.
As a result remove the device tree property ddc-i2c-bus.
Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
---
Changes since v1:
Change the ranking in i2c aliases
v1: https://lkml.org/lkml/2016/9/14/55
---
arch/arm/boot/dts/imx6q-apalis-ixora.dts | 12 +++---------
arch/arm/boot/dts/imx6qdl-apalis.dtsi | 25 +++++++++----------------
2 files changed, 12 insertions(+), 25 deletions(-)
diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
index 207b85b..82b81e0 100644
--- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts
+++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
@@ -55,10 +55,9 @@
"fsl,imx6q";
aliases {
- i2c0 = &i2cddc;
- i2c1 = &i2c1;
- i2c2 = &i2c2;
- i2c3 = &i2c3;
+ i2c0 = &i2c1;
+ i2c1 = &i2c2;
+ i2c2 = &i2c3;
};
aliases {
@@ -186,11 +185,6 @@
};
&hdmi {
- ddc-i2c-bus = <&i2cddc>;
- status = "okay";
-};
-
-&i2cddc {
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
index 99e323b..8c67dd8 100644
--- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
@@ -53,18 +53,6 @@
status = "disabled";
};
- /* DDC_I2C: I2C2_SDA/SCL on MXM3 205/207 */
- i2cddc: i2c@0 {
- compatible = "i2c-gpio";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c_ddc>;
- gpios = <&gpio3 16 GPIO_ACTIVE_HIGH /* sda */
- &gpio2 30 GPIO_ACTIVE_HIGH /* scl */
- >;
- i2c-gpio,delay-us = <2>; /* ~100 kHz */
- status = "disabled";
- };
-
reg_1p8v: regulator-1p8v {
compatible = "regulator-fixed";
regulator-name = "1P8V";
@@ -209,6 +197,12 @@
};
};
+&hdmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hdmi_ddc>;
+ status = "disabled";
+};
+
/*
* GEN1_I2C: I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier
* board)
@@ -633,11 +627,10 @@
>;
};
- pinctrl_i2c_ddc: gpioi2cddcgrp {
+ pinctrl_hdmi_ddc: hdmiddcgrp {
fsl,pins = <
- /* DDC bitbang */
- MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0
- MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x1b0b0
+ MX6QDL_PAD_EIM_EB2__HDMI_TX_DDC_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D16__HDMI_TX_DDC_SDA 0x4001b8b1
>;
};
--
2.9.3
next reply other threads:[~2016-09-19 5:20 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-19 5:11 Sanchayan Maity [this message]
2016-09-19 5:11 ` [PATCH v2 2/3] ARM: dts: imx6q-apalis-ixora: Remove use of pwm-leds Sanchayan Maity
2016-10-22 3:32 ` Shawn Guo
2016-09-19 5:11 ` [PATCH v2 3/3] ARM: dts: imx6qdl-apalis: Use enable-gpios property for backlight Sanchayan Maity
2016-10-22 3:32 ` Shawn Guo
2016-09-27 4:19 ` [PATCH v2 1/3] ARM: dts: imx6qdl-apalis: Do not rely on DDC I2C bus bitbang for HDMI maitysanchayan
2016-09-27 6:28 ` Marcel Ziswiler
2016-10-22 3:25 ` Shawn Guo
2016-10-22 12:43 ` Vladimir Zapolskiy
2016-11-08 17:33 ` maitysanchayan
2016-11-09 0:50 ` Stefan Agner
2016-11-10 18:29 ` Vladimir Zapolskiy
2016-11-11 4:27 ` Stefan Agner
2016-11-14 1:55 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2263d508999ada9476268138b2922702eb50131f.1474260360.git.maitysanchayan@gmail.com \
--to=maitysanchayan@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcel.ziswiler@toradex.com \
--cc=shawnguo@kernel.org \
--cc=stefan@agner.ch \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).