On Tue, 2021-01-12 at 16:05 +0000, Russell King - ARM Linux admin
wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you
> know the content is safe
> 
> On Tue, Jan 12, 2021 at 03:33:34PM +0100, Bjarni Jonasson wrote:
> > On Mon, 2021-01-11 at 14:18 +0000, Russell King - ARM Linux admin
> > wrote:
> > > EXTERNAL EMAIL: Do not click links or open attachments unless you
> > > know the content is safe
> > > 
> > > On Mon, Jan 11, 2021 at 02:06:55PM +0100, Bjarni Jonasson wrote:
> > > > Adding support for 100 base-x in phylink.
> > > > The Sparx5 switch supports 100 base-x pcs (IEEE 802.3 Clause
> > > > 24)
> > > > 4b5b encoded.
> > > > These patches adds phylink support for that mode.
> > > > 
> > > > Tested in Sparx5, using sfp modules:
> > > > Axcen 100fx AXFE-1314-0521
> > > > Cisco GLC-FE-100LX
> > > > HP SFP 100FX J9054C
> > > > Excom SFP-SX-M1002
> > > 
> > > For each of these modules, please send me:
> > > 
> > > ethtool -m ethx raw on > module.bin
> > > 
> > > so I can validate future changes with these modules. Thanks.
> > > 
> > > --
> > > RMK's Patch system: 
> > > https://www.armlinux.org.uk/developer/patches/
> > > FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
> > 
> > I've included the dump from ethtool for:
> > Axcen 100fx AXFE-1314-0521
> > Axcen 100lx AXFE-1314-0551
> > Excom SFP-SX-M1002
> > HP SFP 100FX J9054C
> > The "ethtool raw" output seems a bit garbled so I added the hex
> > output
> > as well.
> 
> It is exactly the command that I quoted above that I require. Yes,
> the output will be "garbled" as it is a raw binary dump of the EEPROM
> contents - it's not meant to be displayed directly on the console.
> 
> Please resend.
> 
> Thanks.
> 
> --
> RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
> FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!

Resending the raw format for the 4 modules.
Rgds
--
Bjarni Jonasson
Microchip