From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751042AbdAQKUB (ORCPT ); Tue, 17 Jan 2017 05:20:01 -0500 Received: from smtprelay2.synopsys.com ([198.182.60.111]:35601 "EHLO smtprelay.synopsys.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750817AbdAQKT7 (ORCPT ); Tue, 17 Jan 2017 05:19:59 -0500 Subject: Re: [PATCH] pcie: ti: Provide patch to force GEN1 PCIe operation To: Kishon Vijay Abraham I , Joao Pinto , Lukasz Majewski , "jingoohan1@gmail.com" References: <1484486354-4585-1-git-send-email-lukma@denx.de> <587C6A40.8070608@ti.com> <20170116074927.086418f4@jawa> <587C8088.80905@ti.com> <20170116103136.21c899ac@jawa> <587C9CE6.8040001@ti.com> <76d18446-78c9-87f2-22ad-f7ea38771285@synopsys.com> <587DAD37.5030201@ti.com> CC: Bjorn Helgaas , Rob Herring , Mark Rutland , , , , From: Joao Pinto Message-ID: <24cff7e5-42d6-66e2-6f10-a6ea4ceb8899@synopsys.com> Date: Tue, 17 Jan 2017 10:19:53 +0000 User-Agent: Mozilla/5.0 (Windows NT 10.0; WOW64; rv:45.0) Gecko/20100101 Thunderbird/45.6.0 MIME-Version: 1.0 In-Reply-To: <587DAD37.5030201@ti.com> Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit X-Originating-IP: [10.107.19.116] Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi, Às 5:35 AM de 1/17/2017, Kishon Vijay Abraham I escreveu: > Hi Joao, > > On Monday 16 January 2017 10:31 PM, Joao Pinto wrote: >> >> Hi, >> >> Às 10:13 AM de 1/16/2017, Kishon Vijay Abraham I escreveu: >>> + Joao, Jingoo >>> >>> Hi, >>> >>> On Monday 16 January 2017 03:01 PM, Lukasz Majewski wrote: >>>> Hi Kishon, >>>> >>>>> Hi Łukasz, >>>>> >>>>> On Monday 16 January 2017 12:19 PM, Lukasz Majewski wrote: >>>>>> Hi Kishon, >>>>>> >>>>>>> Hi, >>>>>>> >>>>>>> On Sunday 15 January 2017 06:49 PM, Lukasz Majewski wrote: >>>>>>>> Some devices (due to e.g. bad PCIe signal integrity) require to >>>>>>>> run with forced GEN1 speed on PCIe bus. >>>>>>>> >>>>>>>> This patch changes the speed explicitly on dra7 based devices when >>>>>>>> proper device tree attribute is defined for the PCIe controller. >>>>>>>> >>>>>>>> Signed-off-by: Lukasz Majewski >>>>>>> >>>>>>> Bjorn has already queued a patch to do the same thing >>>>>>> https://urldefense.proofpoint.com/v2/url?u=https-3A__git.kernel.org_cgit_linux_kernel_git_helgaas_pci.git_log_-3Fh-3Dpci_host-2Ddra7xx&d=DwIDaQ&c=DPL6_X_6JkXFx7AXWqB0tg&r=s2fO0hii0OGNOv9qQy_HRXy-xAJUD1NNoEcc3io_kx0&m=zD82T5n4WcL7Ga-NSY2NI7KE75xQ99hN-mW2yX46wQk&s=E8zk1CbKxGH-f3fw_WpXxFU-A8BLkgA8NusCaxk1SvA&e= >>>>>> >>>>>> It seems like Bjorn only modifies CAP registers. >>>>> >>>>> The patch also modifies the LNKCTL2 register. >>>>>> >>>>>> He also needs to change register with 0x080C offset to actually >>>>>> ( PCIECTRL_PL_WIDTH_SPEED_CTL ) >>>>> >>>>> This bit is used to initiate speed change (after the link is >>>>> initialized in GEN1). Resetting the bit (like what you have done >>>>> here) prevents speed change. >>>> >>>> This is strange, but e2e advised me to do things as I did in the patch >>>> to _force_ GEN1 operation on PCIe2 port [1] (AM5728) >>>> >>>> Link: >>>> [1] https://urldefense.proofpoint.com/v2/url?u=https-3A__e2e.ti.com_support_arm_sitara-5Farm_f_791_t_566421&d=DwIDaQ&c=DPL6_X_6JkXFx7AXWqB0tg&r=s2fO0hii0OGNOv9qQy_HRXy-xAJUD1NNoEcc3io_kx0&m=zD82T5n4WcL7Ga-NSY2NI7KE75xQ99hN-mW2yX46wQk&s=uXLwglyRYqKpwp1JSxkOWmKpQ2wjfhgofpm8DCfquNw&e= >>>> >>>> Both patches modify 0x5180 007C register to set GEN1 capability >>>> (PCI_EXP_LNKCAP_SLS_2_5GB) >>>> >>>> The problem is with second register (in your patch): >>>> >>>> From SPRUHZ6G TRM: >>>> >>>> PCIECTRL_EP_DBICS_LNK_CAS_2 (0x5180 00A0) >>>> - TRGT_LINK_SPEED (Reset 0x1) - "Target Link Speed" - no more >>>> description in TRM >>>> >>>> It is set to PCI_EXP_LNKCAP_SLS_2_5GB = 0x1, which is the same as >>>> default /reset value. >>> >>> The default value is 0x2 (or else none of the cards would have enumerated in GEN2) >>>> >>>> >>>> Could you clarify which way to _force_ PCIe GEN1 operation is correct? >>>> Mine shows differences in lspci output (as posted in [1]). >>> >>> You'll see the difference even with the patch in Bjorn's tree ;-) >>> >>> I think these are 2 different approaches to keep the link at GEN1. Joao or >>> Jingoo, do you have any suggestion here? >> >> I studied the Databook, and both approaches seem to be right, dependently of the >> Core configuration and setup. >> >> The standard manual speed change sequence is: >> a) Write to PCIE_CAP_TARGET_LINK_SPEED (indicating desired speed) >> b) Clear "Directed Speed Change" >> c) Set "Directed Speed Change" >> >> If "Directed Speed Change" is set (DEFAULT_GEN2_SPEED_CHANGE is the default >> value), it will execute LTSSM to initiate speed change to Gen2 or Gen3, after >> link is started in Gen1, and then the bit is automatically cleared. >> >> Lukasz is reseting this bit, in order to avoid the LTSSM to be executed, which >> is correct. There is another way to prevent this automatic speed change, which >> is to set GEN1 speed before link up which might be difficult in some setups, so >> Kishon's also right. > > Just for my understanding, why do you think this will be difficult in some setups? It depends on the way some PCI Cores are configured. >> >> In my opinion Lukasz approach would be the one that might be more universal and >> more "secure". > > IMHO setting link control in the standard PCIe header space should be more > universal. I'm not sure about the secure part though. When I said secure, I misleaded you, sorry. I meant more robust. > > Thanks > Kishon >> >> Joao >> >> >>> >>>> >>>>> >>>>> IMO the better way is to set the LNKCTL2 to GEN1 instead of hacking >>>>> the IP register. >>>> >>>> From the original patch description: >>>> >>>> "Add support to force Root Complex to work in GEN1 mode if so desired, >>>> but don't force GEN1 mode on any board just yet." >>>> >>>> Are there any (floating around) patches allowing forcing GEN1 operation >>>> on any board (I would like to reuse/port them to my current solution)? >>> >>> For setting to GEN1 mode, "max-link-speed" should be set to 1 in dt with the >>> patch in Bjorn's tree. >>> >>> Thanks >>> Kishon >>> >>