From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Wed, 12 Sep 2001 14:22:59 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Wed, 12 Sep 2001 14:22:50 -0400 Received: from anguita.dti2.net ([195.57.112.8]:55558 "EHLO anguita.dti2.net") by vger.kernel.org with ESMTP id ; Wed, 12 Sep 2001 14:22:32 -0400 Message-ID: <24da01c13bb7$b6495e00$061010ac@dti2.net> From: "Jorge Boncompte [DTI2]" To: "Jens Hoefkens" , "Alan Cox" Cc: In-Reply-To: Subject: Re: 2.2.19 boot failure Date: Wed, 12 Sep 2001 20:21:16 +0200 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4522.1200 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 X-MDRemoteIP: 195.57.112.5 X-Return-Path: jorge@dti2.net X-MDaemon-Deliver-To: linux-kernel@vger.kernel.org Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org ----- Original Message ----- From: "Jens Hoefkens" To: "Alan Cox" Cc: Sent: Wednesday, August 29, 2001 6:21 AM Subject: Re: 2.2.19 boot failure > On Mon, 27 Aug 2001, Alan Cox wrote: > > > > > Can you boot it with a serial console ? > > > > Hi Alan. > > I have the same problem with the serial console. The single CPU kernel > boots fine and dumps the log to the serial port, the SMP kernel > freezes right after > > "Uncompressing Linux... OK, booting the kernel" > > and there is no output to the serial console. However, I have done > some more tests with 2.4.9 kernels. > > 1) Single CPU 2.4.9 boots and reports tons of machine check exceptions > (output from the serial console in [1]). I also tried my best runnung > the OOPS trhough ksymoops ([3]). > > 2) Single CPU 2.4.9 with "nomce" parameter boots fine ([2]). > > 3) SMP 2.4.9 freezes the machine right after "OK, booting the kernel" > (with and without the "nomce" parameter). > > Btw, I have swapped the CPUs around with no change. Moreover, I > remember that an earlier 2.2 kernel worked with both CPUs on this > board (if necessary, I can go back and try to find the last working > kernel - although it will take some time). > Hello, I have recently upgraded a server, from 2.4.4 to 2.4.9, with a M54p-09N motherboard (Dual Pentium 133) and I've got the same result, with two differences, mine boots in SMP with "nomce", and I don't get any oops, the server just hangs after all that MCE reports. Is there something that I could do to debug it? Regards. -Jorge ============================================================== Jorge Boncompte - Técnico de sistemas DTI2 - Desarrollo de la Tecnología de las Comunicaciones -------------------------------------------------------------- C/ Abogado Enriquez Barrios, 5 14004 CORDOBA (SPAIN) Tlf: +34 957 761395 / FAX: +34 957 450380 -------------------------------------------------------------- jorge@dti2.net _-_-_-_-_-_-_-_-_-_-_-_-_-_ http://www.dti2.net ============================================================== - Sin pistachos no hay Rock & Roll... - Without wicker a basket cannot be done. ==============================================================