LKML Archive on
 help / color / Atom feed
From: "Jernej Škrabec" <>
To:, Pablo Greco <>
Cc: Pablo Greco <>,
	Rob Herring <>,
	Maxime Ripard <>, Chen-Yu Tsai <>,
	Hans de Goede <>,
	Icenowy Zheng <>,,,
Subject: Re: [PATCH] ARM: dts: sun7i: bananapi: Enable RGMII RX/TX delay on Ethernet PHY
Date: Sun, 01 Nov 2020 08:34:41 +0100
Message-ID: <2511553.tmk64t66L6@kista> (raw)
In-Reply-To: <>

Dne nedelja, 01. november 2020 ob 01:34:15 CET je Pablo Greco napisal(a):
> The Ethernet PHY on the Bananapi M1 has the RX and TX delays enabled on
> the PHY, using pull-ups on the RXDLY and TXDLY pins.
> Fix the phy-mode description to correct reflect this so that the
> implementation doesn't reconfigure the delays incorrectly. This
> happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e
> rx/tx delay config").
> Fixes: 8a5b272fbf44 ("ARM: dts: sun7i: Add Banana Pi board")
> Signed-off-by: Pablo Greco <>

Acked-by: Jernej Skrabec <>



  parent reply index

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-01  0:34 Pablo Greco
2020-11-01  0:34 ` [PATCH] ARM: dts: sun8i: r40: bananapi-m2-berry: Fix dcdc1 regulator Pablo Greco
2020-11-01  7:31   ` Jernej Škrabec
2020-11-01  0:34 ` [PATCH] ARM: dts: sun8i: v40: bananapi-m2-berry: Fix ethernet node Pablo Greco
2020-11-01  7:29   ` Jernej Škrabec
2020-11-01  7:34 ` Jernej Škrabec [this message]
2020-11-02 14:07 ` [PATCH] ARM: dts: sun7i: bananapi: Enable RGMII RX/TX delay on Ethernet PHY Maxime Ripard
2020-11-02 14:21   ` Pablo Sebastián Greco
2020-11-02 14:16 Pablo Greco
2020-11-02 17:06 ` Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2511553.tmk64t66L6@kista \ \ \ \ \ \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on

Archives are clonable:
	git clone --mirror lkml/git/0.git
	git clone --mirror lkml/git/1.git
	git clone --mirror lkml/git/2.git
	git clone --mirror lkml/git/3.git
	git clone --mirror lkml/git/4.git
	git clone --mirror lkml/git/5.git
	git clone --mirror lkml/git/6.git
	git clone --mirror lkml/git/7.git
	git clone --mirror lkml/git/8.git
	git clone --mirror lkml/git/9.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ \
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone