LKML Archive on
 help / color / Atom feed
From: Heiko Stuebner <>
To: Otavio Salvador <>
	Jason Zhu <>,
	Vicent Chi <>,
	Andy Yan <>,
	Philipp Tomsic <>,,,,
	Rob Herring <>,
	Mark Rutland <>,
	Olof Johansson <>
Subject: Re: [PATCH 4/4] ARM: dts: rv1108: Add support for rv1108-elgin-r1 board
Date: Sat, 12 Jan 2019 21:16:58 +0100
Message-ID: <2576878.pKSbgTzd5o@phil> (raw)
In-Reply-To: <>

Am Freitag, 4. Januar 2019, 02:40:23 CET schrieb Otavio Salvador:
> rv1108-elgin-r1 board is based on Rockchip RV1108 SoC.
> Signed-off-by: Otavio Salvador <>

applied all 4 patches (including the vendor-prefix) for 5.1

I've rearranged some minor properties in the board-dts to follow
alphabetical ordering (emmc and gmac).


      parent reply index

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-04  1:40 [PATCH 1/4] ARM: dts: rockchip: Add missing dma-names SPI support for rv1108 Otavio Salvador
2019-01-04  1:40 ` [PATCH 2/4] ARM: dts: rockchip: rv1108: Add spim0 and spim1 pinctrl groups Otavio Salvador
2019-01-04  1:40 ` [PATCH 3/4] dt-bindings: Add vendor prefix for elgin Otavio Salvador
2019-01-11 17:04   ` Rob Herring
2019-01-04  1:40 ` [PATCH 4/4] ARM: dts: rv1108: Add support for rv1108-elgin-r1 board Otavio Salvador
2019-01-11 19:29   ` Rob Herring
2019-01-12 20:16   ` Heiko Stuebner [this message]

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2576878.pKSbgTzd5o@phil \ \ \ \ \ \ \ \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on

Archives are clonable:
	git clone --mirror lkml/git/0.git
	git clone --mirror lkml/git/1.git
	git clone --mirror lkml/git/2.git
	git clone --mirror lkml/git/3.git
	git clone --mirror lkml/git/4.git
	git clone --mirror lkml/git/5.git
	git clone --mirror lkml/git/6.git
	git clone --mirror lkml/git/7.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ \
	public-inbox-index lkml

Newsgroup available over NNTP:

AGPL code for this site: git clone public-inbox