Re: [RFC PATCH v1 25/31] ARC: [plat-arcfpga] Hooking up platform to ARC UART

[Arnd Bergmann <arnd@arndb.de>]

On Monday 07 January 2013 19:34:35 Vineet Gupta wrote:
> On Monday 07 January 2013 07:16 PM, Arnd Bergmann wrote:

> >> static struct of_dev_auxdata arcuart_auxdata_lookup[] __initdata = {
> >> 	OF_DEV_AUXDATA("snps,arc-uart", UART0_BASE, "arc-uart", arc_uart_info),
> >> 	{}
> >> };
> > It should be enough to fill the drv->of_match_table member of the
> > platform_driver with the match table.
> 
> Not sure if I understand. My concern is the #define UART0_BASE (=0xc0fc1000) which
> needs to be defined in code despite that value being present in the device tree.
> And this is needed so that framework could match the device against the driver. I
> would have thought that some device property (in device tree) could enable the
> matching with Linux name (actually DRIVER_NAME defined in the uart driver).  Am I
> missing something ?

I mean you should not need the auxdata entry if the driver does everything
right, and you get rid of the platform_data.

> >> (3) After above, driver's probe routine is getting called with platform_device->id
> >> = -1 and it seems of_device_add() is doing that purposely. How do I handle that.
> > What do you need the id for?
> 
> In case of multiple instances of UART, driver uses this value to index into struct
> arc_uart_port [ ]
> 
> struct arc_uart_port {
>     struct uart_port port;
>     unsigned long baud;
>     int is_emulated;
> };
> 
> static struct arc_uart_port arc_uart_ports[CONFIG_SERIAL_ARC_NR_PORTS];
> 
> arc_serial_probe(struct platform_device *pdev)
>     uart = &arc_uart_ports[pdev->id];
>     arc_uart_init_one(pdev, ..)
>           if (pdev->id < 0 ...)
>                   return -ENOENT;
>  
> Although the current driver is flawed in that it checks for -ve value after
> already indexing into the array :-(
> I'll send a patch to serial list to fix that.

(adding linux-serial to Cc)

Generally speaking, drivers should not have static or fixed-size arrays of
devices in them. What you should do instead is to allocate the arc_uart_port
at from arc_serial_probe() and remove all the references to the global
array. I'm not completely sure if that's possible with the uart_port yet,
maybe someone else can comment on that.

For the id value, have a look at the drivers/tty/serial/mxs-auart.c and how
it gets the id from the /aliases node in the device tree using
of_alias_get_id().

	Arnd