Re: [PATCH v10 2/2] dt-bindings: thermal: Add Sunplus schema

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 12/07/2022 09:30, Li-hao Kuo wrote:
> Add bindings for Sunplus thermal driver
> 
> Signed-off-by: Li-hao Kuo <lhjeff911@gmail.com>
> ---
> Changes in v10:
>  - Fix wrong indentation.
>  - Change the setting of compatible.
>  - Mosdify the setting of remove funciton.
> 
>  .../bindings/thermal/sunplus,thermal.yaml          | 43 ++++++++++++++++++++++
>  MAINTAINERS                                        |  1 +
>  2 files changed, 44 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/thermal/sunplus,thermal.yaml
> 
> diff --git a/Documentation/devicetree/bindings/thermal/sunplus,thermal.yaml b/Documentation/devicetree/bindings/thermal/sunplus,thermal.yaml
> new file mode 100644
> index 0000000..52094da
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/thermal/sunplus,thermal.yaml
> @@ -0,0 +1,43 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +# Copyright (C) Sunplus Co., Ltd.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/thermal/sunplus,thermal.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Sunplus Thermal controller
> +
> +maintainers:
> +  - Li-hao Kuo <lhjeff911@gmail.com>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - sunplus,sp7021-thermal
> +
> +  reg:
> +    maxItems: 1
> +
> +  nvmem-cells:
> +    maxItems: 1
> +
> +  nvmem-cell-names:
> +    const: calib
> +
> +required:
> +  - compatible
> +  - reg
> +  - nvmem-cells
> +  - nvmem-cell-names
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    thermal@9c000280 {
> +        compatible = "sunplus,sp7021-thermal";
> +        reg = <0x9c000280 0xc>;
> +        nvmem-cells = <&calib>;
> +        nvmem-cell-names = "calib";
> +    };
> +...
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 23bde07..a8c44eb 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -19107,6 +19107,7 @@ SUNPLUS THERMAL DRIVER
>  M:	Li-hao Kuo <lhjeff911@gmail.com>
>  L:	linux-pm@vger.kernel.org
>  S:	Maintained
> +F:	Documentation/devicetree/bindings/thermal/sunplus_thermal.yaml

Not a correct path anymore.

Around v7 I asked to name the file either sunplus,thermal.yaml or
sunplus,sp7021-thermal.yaml, but actually that was my mistake a bit
which I learnt later. The only recommended name is the latter, based on
compatible, so:
sunplus,sp7021-thermal.yaml

Please name the bindings "sunplus,sp7021-thermal.yaml", change the $id
and maintainers entry to new filename.

Best regards,
Krzysztof