From: YueHaibing <yuehaibing@huawei.com>
To: <QLogic-Storage-Upstream@cavium.com>, <jejb@linux.ibm.com>,
<martin.petersen@oracle.com>, <mojha@codeaurora.org>,
<skashyap@marvell.com>, <gregkh@linuxfoundation.org>
Cc: <linux-kernel@vger.kernel.org>, <linux-scsi@vger.kernel.org>,
<kernel-janitors@vger.kernel.org>
Subject: Re: [PATCH] scsi: qedi: remove memset/memcpy to nfunc and use func instead
Date: Thu, 9 May 2019 22:50:48 +0800 [thread overview]
Message-ID: <2907a552-a557-afeb-de56-88c958480f0c@huawei.com> (raw)
In-Reply-To: <20190420040554.41888-1-yuehaibing@huawei.com>
Friendly ping, could someone review this patch ?
On 2019/4/20 12:05, Yue Haibing wrote:
> From: YueHaibing <yuehaibing@huawei.com>
>
> KASAN report this:
>
> BUG: KASAN: global-out-of-bounds in qedi_dbg_err+0xda/0x330 [qedi]
> Read of size 31 at addr ffffffffc12b0ae0 by task syz-executor.0/2429
>
> CPU: 0 PID: 2429 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45
> Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
> Call Trace:
> __dump_stack lib/dump_stack.c:77 [inline]
> dump_stack+0xfa/0x1ce lib/dump_stack.c:113
> print_address_description+0x1c4/0x270 mm/kasan/report.c:187
> kasan_report+0x149/0x18d mm/kasan/report.c:317
> memcpy+0x1f/0x50 mm/kasan/common.c:130
> qedi_dbg_err+0xda/0x330 [qedi]
> ? 0xffffffffc12d0000
> qedi_init+0x118/0x1000 [qedi]
> ? 0xffffffffc12d0000
> ? 0xffffffffc12d0000
> ? 0xffffffffc12d0000
> do_one_initcall+0xfa/0x5ca init/main.c:887
> do_init_module+0x204/0x5f6 kernel/module.c:3460
> load_module+0x66b2/0x8570 kernel/module.c:3808
> __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
> do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
> entry_SYSCALL_64_after_hwframe+0x49/0xbe
> RIP: 0033:0x462e99
> Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
> RSP: 002b:00007f2d57e55c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
> RAX: ffffffffffffffda RBX: 000000000073bfa0 RCX: 0000000000462e99
> RDX: 0000000000000000 RSI: 00000000200003c0 RDI: 0000000000000003
> RBP: 00007f2d57e55c70 R08: 0000000000000000 R09: 0000000000000000
> R10: 0000000000000000 R11: 0000000000000246 R12: 00007f2d57e566bc
> R13: 00000000004bcefb R14: 00000000006f7030 R15: 0000000000000004
>
> The buggy address belongs to the variable:
> __func__.67584+0x0/0xffffffffffffd520 [qedi]
>
> Memory state around the buggy address:
> ffffffffc12b0980: fa fa fa fa 00 04 fa fa fa fa fa fa 00 00 05 fa
> ffffffffc12b0a00: fa fa fa fa 00 00 04 fa fa fa fa fa 00 05 fa fa
>> ffffffffc12b0a80: fa fa fa fa 00 06 fa fa fa fa fa fa 00 02 fa fa
> ^
> ffffffffc12b0b00: fa fa fa fa 00 00 04 fa fa fa fa fa 00 00 03 fa
> ffffffffc12b0b80: fa fa fa fa 00 00 02 fa fa fa fa fa 00 00 04 fa
>
> Currently the qedi_dbg_* family of functions can overrun the end
> of the source string if it is less than the destination buffer
> length because of the use of a fixed sized memcpy. Remove the
> memset/memcpy calls to nfunc and just use func instead as it
> is always a null terminated string.
>
> Reported-by: Hulk Robot <hulkci@huawei.com>
> Fixes: ace7f46ba5fd ("scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.")
> Signed-off-by: YueHaibing <yuehaibing@huawei.com>
> ---
> drivers/scsi/qedi/qedi_dbg.c | 32 ++++++++------------------------
> 1 file changed, 8 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/scsi/qedi/qedi_dbg.c b/drivers/scsi/qedi/qedi_dbg.c
> index 8fd28b0..3383314 100644
> --- a/drivers/scsi/qedi/qedi_dbg.c
> +++ b/drivers/scsi/qedi/qedi_dbg.c
> @@ -16,10 +16,6 @@ qedi_dbg_err(struct qedi_dbg_ctx *qedi, const char *func, u32 line,
> {
> va_list va;
> struct va_format vaf;
> - char nfunc[32];
> -
> - memset(nfunc, 0, sizeof(nfunc));
> - memcpy(nfunc, func, sizeof(nfunc) - 1);
>
> va_start(va, fmt);
>
> @@ -28,9 +24,9 @@ qedi_dbg_err(struct qedi_dbg_ctx *qedi, const char *func, u32 line,
>
> if (likely(qedi) && likely(qedi->pdev))
> pr_err("[%s]:[%s:%d]:%d: %pV", dev_name(&qedi->pdev->dev),
> - nfunc, line, qedi->host_no, &vaf);
> + func, line, qedi->host_no, &vaf);
> else
> - pr_err("[0000:00:00.0]:[%s:%d]: %pV", nfunc, line, &vaf);
> + pr_err("[0000:00:00.0]:[%s:%d]: %pV", func, line, &vaf);
>
> va_end(va);
> }
> @@ -41,10 +37,6 @@ qedi_dbg_warn(struct qedi_dbg_ctx *qedi, const char *func, u32 line,
> {
> va_list va;
> struct va_format vaf;
> - char nfunc[32];
> -
> - memset(nfunc, 0, sizeof(nfunc));
> - memcpy(nfunc, func, sizeof(nfunc) - 1);
>
> va_start(va, fmt);
>
> @@ -56,9 +48,9 @@ qedi_dbg_warn(struct qedi_dbg_ctx *qedi, const char *func, u32 line,
>
> if (likely(qedi) && likely(qedi->pdev))
> pr_warn("[%s]:[%s:%d]:%d: %pV", dev_name(&qedi->pdev->dev),
> - nfunc, line, qedi->host_no, &vaf);
> + func, line, qedi->host_no, &vaf);
> else
> - pr_warn("[0000:00:00.0]:[%s:%d]: %pV", nfunc, line, &vaf);
> + pr_warn("[0000:00:00.0]:[%s:%d]: %pV", func, line, &vaf);
>
> ret:
> va_end(va);
> @@ -70,10 +62,6 @@ qedi_dbg_notice(struct qedi_dbg_ctx *qedi, const char *func, u32 line,
> {
> va_list va;
> struct va_format vaf;
> - char nfunc[32];
> -
> - memset(nfunc, 0, sizeof(nfunc));
> - memcpy(nfunc, func, sizeof(nfunc) - 1);
>
> va_start(va, fmt);
>
> @@ -85,10 +73,10 @@ qedi_dbg_notice(struct qedi_dbg_ctx *qedi, const char *func, u32 line,
>
> if (likely(qedi) && likely(qedi->pdev))
> pr_notice("[%s]:[%s:%d]:%d: %pV",
> - dev_name(&qedi->pdev->dev), nfunc, line,
> + dev_name(&qedi->pdev->dev), func, line,
> qedi->host_no, &vaf);
> else
> - pr_notice("[0000:00:00.0]:[%s:%d]: %pV", nfunc, line, &vaf);
> + pr_notice("[0000:00:00.0]:[%s:%d]: %pV", func, line, &vaf);
>
> ret:
> va_end(va);
> @@ -100,10 +88,6 @@ qedi_dbg_info(struct qedi_dbg_ctx *qedi, const char *func, u32 line,
> {
> va_list va;
> struct va_format vaf;
> - char nfunc[32];
> -
> - memset(nfunc, 0, sizeof(nfunc));
> - memcpy(nfunc, func, sizeof(nfunc) - 1);
>
> va_start(va, fmt);
>
> @@ -115,9 +99,9 @@ qedi_dbg_info(struct qedi_dbg_ctx *qedi, const char *func, u32 line,
>
> if (likely(qedi) && likely(qedi->pdev))
> pr_info("[%s]:[%s:%d]:%d: %pV", dev_name(&qedi->pdev->dev),
> - nfunc, line, qedi->host_no, &vaf);
> + func, line, qedi->host_no, &vaf);
> else
> - pr_info("[0000:00:00.0]:[%s:%d]: %pV", nfunc, line, &vaf);
> + pr_info("[0000:00:00.0]:[%s:%d]: %pV", func, line, &vaf);
>
> ret:
> va_end(va);
>
next prev parent reply other threads:[~2019-05-09 14:50 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-12 9:48 [PATCH][V2] scsi: qedf: remove memset/memcpy to nfunc and use func instead Colin King
2019-04-18 8:13 ` Saurav Kashyap
2019-04-19 0:33 ` Martin K. Petersen
2019-04-20 4:05 ` [PATCH] scsi: qedi: " Yue Haibing
2019-05-09 14:50 ` YueHaibing [this message]
2019-05-10 11:29 ` Dan Carpenter
2019-05-13 22:31 ` Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2907a552-a557-afeb-de56-88c958480f0c@huawei.com \
--to=yuehaibing@huawei.com \
--cc=QLogic-Storage-Upstream@cavium.com \
--cc=gregkh@linuxfoundation.org \
--cc=jejb@linux.ibm.com \
--cc=kernel-janitors@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=mojha@codeaurora.org \
--cc=skashyap@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).