From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-13.7 required=3.0 tests=BAYES_00, HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_CR_TRAILER,INCLUDES_PATCH, MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_PASS,URIBL_BLOCKED autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id BAA8DC433FE for ; Wed, 9 Dec 2020 13:14:49 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 5E5D22064B for ; Wed, 9 Dec 2020 13:14:49 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1732281AbgLINOa (ORCPT ); Wed, 9 Dec 2020 08:14:30 -0500 Received: from pegase1.c-s.fr ([93.17.236.30]:43566 "EHLO pegase1.c-s.fr" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1732247AbgLINON (ORCPT ); Wed, 9 Dec 2020 08:14:13 -0500 Received: from localhost (mailhub1-int [192.168.12.234]) by localhost (Postfix) with ESMTP id 4Crcsr44NFz9tyyl; Wed, 9 Dec 2020 14:12:48 +0100 (CET) X-Virus-Scanned: Debian amavisd-new at c-s.fr Received: from pegase1.c-s.fr ([192.168.12.234]) by localhost (pegase1.c-s.fr [192.168.12.234]) (amavisd-new, port 10024) with ESMTP id oonVKru1QFLg; Wed, 9 Dec 2020 14:12:48 +0100 (CET) Received: from messagerie.si.c-s.fr (messagerie.si.c-s.fr [192.168.25.192]) by pegase1.c-s.fr (Postfix) with ESMTP id 4Crcsr37C4z9ty3q; Wed, 9 Dec 2020 14:12:48 +0100 (CET) Received: from localhost (localhost [127.0.0.1]) by messagerie.si.c-s.fr (Postfix) with ESMTP id B85D78B7F0; Wed, 9 Dec 2020 14:12:49 +0100 (CET) X-Virus-Scanned: amavisd-new at c-s.fr Received: from messagerie.si.c-s.fr ([127.0.0.1]) by localhost (messagerie.si.c-s.fr [127.0.0.1]) (amavisd-new, port 10023) with ESMTP id r0vOctXQZGIK; Wed, 9 Dec 2020 14:12:49 +0100 (CET) Received: from localhost.localdomain (unknown [192.168.4.90]) by messagerie.si.c-s.fr (Postfix) with ESMTP id 0A2FE8B7F3; Wed, 9 Dec 2020 14:12:49 +0100 (CET) Received: by localhost.localdomain (Postfix, from userid 0) id 7D077606AF; Wed, 9 Dec 2020 13:12:48 +0000 (UTC) Message-Id: <296c327d96ac7d1e82c3aa5c968569b19375bf0c.1607519516.git.christophe.leroy@csgroup.eu> In-Reply-To: <0de931e8cce4358ef892e1afa283503476293094.1607519516.git.christophe.leroy@csgroup.eu> References: <0de931e8cce4358ef892e1afa283503476293094.1607519516.git.christophe.leroy@csgroup.eu> From: Christophe Leroy Subject: [RESEND v1 3/5] powerpc: Remove support for 40x To: Benjamin Herrenschmidt , Paul Mackerras , Michael Ellerman Cc: linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org Date: Wed, 9 Dec 2020 13:12:48 +0000 (UTC) Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Now that 40x platforms have gone, remove support for 40x in the core of powerpc arch. Signed-off-by: Christophe Leroy --- arch/powerpc/Kconfig | 8 +- arch/powerpc/Kconfig.debug | 13 - arch/powerpc/Makefile | 1 - arch/powerpc/include/asm/cputable.h | 7 - arch/powerpc/include/asm/irq.h | 2 +- arch/powerpc/include/asm/mmu.h | 4 - arch/powerpc/include/asm/nohash/32/mmu-40x.h | 68 -- arch/powerpc/include/asm/nohash/32/pgtable.h | 4 +- arch/powerpc/include/asm/nohash/32/pte-40x.h | 88 --- arch/powerpc/include/asm/nohash/mmu.h | 5 +- arch/powerpc/include/asm/reg.h | 27 +- arch/powerpc/include/asm/reg_booke.h | 100 +-- arch/powerpc/include/asm/time.h | 7 +- arch/powerpc/include/asm/udbg.h | 1 - arch/powerpc/kernel/Makefile | 1 - arch/powerpc/kernel/asm-offsets.c | 4 +- arch/powerpc/kernel/cputable.c | 276 ------- arch/powerpc/kernel/entry_32.S | 75 +- arch/powerpc/kernel/head_32.h | 33 - arch/powerpc/kernel/head_40x.S | 715 ------------------- arch/powerpc/kernel/irq.c | 2 +- arch/powerpc/kernel/kgdb.c | 4 +- arch/powerpc/kernel/misc_32.S | 40 -- arch/powerpc/kernel/setup.h | 2 +- arch/powerpc/kernel/setup_32.c | 2 +- arch/powerpc/kernel/time.c | 2 +- arch/powerpc/kernel/traps.c | 2 +- arch/powerpc/kernel/udbg.c | 3 - arch/powerpc/kernel/udbg_16550.c | 23 - arch/powerpc/mm/mmu_decl.h | 8 +- arch/powerpc/mm/nohash/40x.c | 152 ---- arch/powerpc/mm/nohash/Makefile | 1 - arch/powerpc/mm/nohash/tlb_low.S | 27 +- arch/powerpc/platforms/4xx/pci.c | 100 --- arch/powerpc/platforms/Kconfig.cputype | 9 +- 35 files changed, 29 insertions(+), 1787 deletions(-) delete mode 100644 arch/powerpc/include/asm/nohash/32/mmu-40x.h delete mode 100644 arch/powerpc/include/asm/nohash/32/pte-40x.h delete mode 100644 arch/powerpc/kernel/head_40x.S delete mode 100644 arch/powerpc/mm/nohash/40x.c diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 9e679ba0811c..e97fa9020951 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -339,7 +339,7 @@ config ARCH_SUSPEND_POSSIBLE def_bool y depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200 || PPC_83xx || \ (PPC_85xx && !PPC_E500MC) || PPC_86xx || PPC_PSERIES \ - || 44x || 40x + || 44x config ARCH_SUSPEND_NONZERO_CPU def_bool y @@ -370,7 +370,7 @@ config ARCH_SUPPORTS_UPROBES config PPC_ADV_DEBUG_REGS bool - depends on 40x || BOOKE + depends on BOOKE default y config PPC_ADV_DEBUG_IACS @@ -1041,7 +1041,7 @@ config GENERIC_ISA_DMA config PPC_INDIRECT_PCI bool depends on PCI - default y if 40x || 44x + default y if 44x config SBUS bool @@ -1066,7 +1066,7 @@ config FSL_PMC config PPC4xx_CPM bool default y - depends on SUSPEND && (44x || 40x) + depends on SUSPEND && 44x help PPC4xx Clock Power Management (CPM) support (suspend/resume). It also enables support for two different idle states (idle-wait diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug index b88900f4832f..5fe2b5667b42 100644 --- a/arch/powerpc/Kconfig.debug +++ b/arch/powerpc/Kconfig.debug @@ -224,14 +224,6 @@ config PPC_EARLY_DEBUG_44x inbuilt serial port. If you enable this, ensure you set PPC_EARLY_DEBUG_44x_PHYSLOW below to suit your target board. -config PPC_EARLY_DEBUG_40x - bool "Early serial debugging for IBM/AMCC 40x CPUs" - depends on 40x - help - Select this to enable early debugging for IBM 40x chips via the - inbuilt serial port. This works on chips with a 16550 compatible - UART. - config PPC_EARLY_DEBUG_CPM bool "Early serial debugging for Freescale CPM-based serial ports" depends on SERIAL_CPM @@ -332,11 +324,6 @@ config PPC_EARLY_DEBUG_44x_PHYSHIGH depends on PPC_EARLY_DEBUG_44x default "0x1" -config PPC_EARLY_DEBUG_40x_PHYSADDR - hex "Early debug UART physical address" - depends on PPC_EARLY_DEBUG_40x - default "0xef600300" - config PPC_EARLY_DEBUG_CPM_ADDR hex "CPM UART early debug transmit descriptor address" depends on PPC_EARLY_DEBUG_CPM diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index fde3dbe57bda..c799a88b867c 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -265,7 +265,6 @@ KBUILD_CFLAGS += $(cflags-y) head-$(CONFIG_PPC64) := arch/powerpc/kernel/head_64.o head-$(CONFIG_PPC_BOOK3S_32) := arch/powerpc/kernel/head_book3s_32.o head-$(CONFIG_PPC_8xx) := arch/powerpc/kernel/head_8xx.o -head-$(CONFIG_40x) := arch/powerpc/kernel/head_40x.o head-$(CONFIG_44x) := arch/powerpc/kernel/head_44x.o head-$(CONFIG_FSL_BOOKE) := arch/powerpc/kernel/head_fsl_booke.o diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h index 8a4e1ed8a4a2..3ec018370d96 100644 --- a/arch/powerpc/include/asm/cputable.h +++ b/arch/powerpc/include/asm/cputable.h @@ -375,7 +375,6 @@ static inline void cpu_feature_keys_init(void) { } CPU_FTR_COMMON | CPU_FTR_FPU_UNAVAILABLE | CPU_FTR_NOEXECUTE) #define CPU_FTRS_CLASSIC32 (CPU_FTR_COMMON) #define CPU_FTRS_8XX (CPU_FTR_NOEXECUTE) -#define CPU_FTRS_40X (CPU_FTR_NOEXECUTE) #define CPU_FTRS_44X (CPU_FTR_NOEXECUTE) #define CPU_FTRS_440x6 (CPU_FTR_NOEXECUTE | \ CPU_FTR_INDEXED_DCR) @@ -516,9 +515,6 @@ enum { #ifdef CONFIG_PPC_8xx CPU_FTRS_8XX | #endif -#ifdef CONFIG_40x - CPU_FTRS_40X | -#endif #ifdef CONFIG_PPC_47x CPU_FTRS_47X | CPU_FTR_476_DD2 | #elif defined(CONFIG_44x) @@ -585,9 +581,6 @@ enum { #ifdef CONFIG_PPC_8xx CPU_FTRS_8XX & #endif -#ifdef CONFIG_40x - CPU_FTRS_40X & -#endif #ifdef CONFIG_PPC_47x CPU_FTRS_47X & #elif defined(CONFIG_44x) diff --git a/arch/powerpc/include/asm/irq.h b/arch/powerpc/include/asm/irq.h index 4f983ca4030a..4e6434c7d8d1 100644 --- a/arch/powerpc/include/asm/irq.h +++ b/arch/powerpc/include/asm/irq.h @@ -39,7 +39,7 @@ struct pt_regs; #define __ARCH_HAS_DO_SOFTIRQ -#if defined(CONFIG_BOOKE) || defined(CONFIG_40x) +#ifdef CONFIG_BOOKE /* * Per-cpu stacks for handling critical, debug and machine check * level interrupts. diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h index 620e8fe6f8fd..c43d79de9ccf 100644 --- a/arch/powerpc/include/asm/mmu.h +++ b/arch/powerpc/include/asm/mmu.h @@ -16,7 +16,6 @@ */ #define MMU_FTR_HPTE_TABLE ASM_CONST(0x00000001) #define MMU_FTR_TYPE_8xx ASM_CONST(0x00000002) -#define MMU_FTR_TYPE_40x ASM_CONST(0x00000004) #define MMU_FTR_TYPE_44x ASM_CONST(0x00000008) #define MMU_FTR_TYPE_FSL_E ASM_CONST(0x00000010) #define MMU_FTR_TYPE_47x ASM_CONST(0x00000020) @@ -163,9 +162,6 @@ enum { #ifdef CONFIG_PPC_8xx MMU_FTR_TYPE_8xx | #endif -#ifdef CONFIG_40x - MMU_FTR_TYPE_40x | -#endif #ifdef CONFIG_PPC_47x MMU_FTR_TYPE_47x | MMU_FTR_USE_TLBIVAX_BCAST | MMU_FTR_LOCK_BCAST_INVAL | #elif defined(CONFIG_44x) diff --git a/arch/powerpc/include/asm/nohash/32/mmu-40x.h b/arch/powerpc/include/asm/nohash/32/mmu-40x.h deleted file mode 100644 index 8a8f13a22cf4..000000000000 --- a/arch/powerpc/include/asm/nohash/32/mmu-40x.h +++ /dev/null @@ -1,68 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _ASM_POWERPC_MMU_40X_H_ -#define _ASM_POWERPC_MMU_40X_H_ - -/* - * PPC40x support - */ - -#define PPC40X_TLB_SIZE 64 - -/* - * TLB entries are defined by a "high" tag portion and a "low" data - * portion. On all architectures, the data portion is 32-bits. - * - * TLB entries are managed entirely under software control by reading, - * writing, and searchoing using the 4xx-specific tlbre, tlbwr, and tlbsx - * instructions. - */ - -#define TLB_LO 1 -#define TLB_HI 0 - -#define TLB_DATA TLB_LO -#define TLB_TAG TLB_HI - -/* Tag portion */ - -#define TLB_EPN_MASK 0xFFFFFC00 /* Effective Page Number */ -#define TLB_PAGESZ_MASK 0x00000380 -#define TLB_PAGESZ(x) (((x) & 0x7) << 7) -#define PAGESZ_1K 0 -#define PAGESZ_4K 1 -#define PAGESZ_16K 2 -#define PAGESZ_64K 3 -#define PAGESZ_256K 4 -#define PAGESZ_1M 5 -#define PAGESZ_4M 6 -#define PAGESZ_16M 7 -#define TLB_VALID 0x00000040 /* Entry is valid */ - -/* Data portion */ - -#define TLB_RPN_MASK 0xFFFFFC00 /* Real Page Number */ -#define TLB_PERM_MASK 0x00000300 -#define TLB_EX 0x00000200 /* Instruction execution allowed */ -#define TLB_WR 0x00000100 /* Writes permitted */ -#define TLB_ZSEL_MASK 0x000000F0 -#define TLB_ZSEL(x) (((x) & 0xF) << 4) -#define TLB_ATTR_MASK 0x0000000F -#define TLB_W 0x00000008 /* Caching is write-through */ -#define TLB_I 0x00000004 /* Caching is inhibited */ -#define TLB_M 0x00000002 /* Memory is coherent */ -#define TLB_G 0x00000001 /* Memory is guarded from prefetch */ - -#ifndef __ASSEMBLY__ - -typedef struct { - unsigned int id; - unsigned int active; - void __user *vdso; -} mm_context_t; - -#endif /* !__ASSEMBLY__ */ - -#define mmu_virtual_psize MMU_PAGE_4K -#define mmu_linear_psize MMU_PAGE_256M - -#endif /* _ASM_POWERPC_MMU_40X_H_ */ diff --git a/arch/powerpc/include/asm/nohash/32/pgtable.h b/arch/powerpc/include/asm/nohash/32/pgtable.h index 96522f7f0618..ed716aa0ba9d 100644 --- a/arch/powerpc/include/asm/nohash/32/pgtable.h +++ b/arch/powerpc/include/asm/nohash/32/pgtable.h @@ -126,9 +126,7 @@ int map_kernel_page(unsigned long va, phys_addr_t pa, pgprot_t prot); * (hardware-defined) PowerPC PTE as closely as possible. */ -#if defined(CONFIG_40x) -#include -#elif defined(CONFIG_44x) +#if defined(CONFIG_44x) #include #elif defined(CONFIG_FSL_BOOKE) && defined(CONFIG_PTE_64BIT) #include diff --git a/arch/powerpc/include/asm/nohash/32/pte-40x.h b/arch/powerpc/include/asm/nohash/32/pte-40x.h deleted file mode 100644 index 2d3153cfc0d7..000000000000 --- a/arch/powerpc/include/asm/nohash/32/pte-40x.h +++ /dev/null @@ -1,88 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _ASM_POWERPC_NOHASH_32_PTE_40x_H -#define _ASM_POWERPC_NOHASH_32_PTE_40x_H -#ifdef __KERNEL__ - -/* - * At present, all PowerPC 400-class processors share a similar TLB - * architecture. The instruction and data sides share a unified, - * 64-entry, fully-associative TLB which is maintained totally under - * software control. In addition, the instruction side has a - * hardware-managed, 4-entry, fully-associative TLB which serves as a - * first level to the shared TLB. These two TLBs are known as the UTLB - * and ITLB, respectively (see "mmu.h" for definitions). - * - * There are several potential gotchas here. The 40x hardware TLBLO - * field looks like this: - * - * 0 1 2 3 4 ... 18 19 20 21 22 23 24 25 26 27 28 29 30 31 - * RPN..................... 0 0 EX WR ZSEL....... W I M G - * - * Where possible we make the Linux PTE bits match up with this - * - * - bits 20 and 21 must be cleared, because we use 4k pages (40x can - * support down to 1k pages), this is done in the TLBMiss exception - * handler. - * - We use only zones 0 (for kernel pages) and 1 (for user pages) - * of the 16 available. Bit 24-26 of the TLB are cleared in the TLB - * miss handler. Bit 27 is PAGE_USER, thus selecting the correct - * zone. - * - PRESENT *must* be in the bottom two bits because swap cache - * entries use the top 30 bits. Because 40x doesn't support SMP - * anyway, M is irrelevant so we borrow it for PAGE_PRESENT. Bit 30 - * is cleared in the TLB miss handler before the TLB entry is loaded. - * - All other bits of the PTE are loaded into TLBLO without - * modification, leaving us only the bits 20, 21, 24, 25, 26, 30 for - * software PTE bits. We actually use bits 21, 24, 25, and - * 30 respectively for the software bits: ACCESSED, DIRTY, RW, and - * PRESENT. - */ - -#define _PAGE_GUARDED 0x001 /* G: page is guarded from prefetch */ -#define _PAGE_PRESENT 0x002 /* software: PTE contains a translation */ -#define _PAGE_NO_CACHE 0x004 /* I: caching is inhibited */ -#define _PAGE_WRITETHRU 0x008 /* W: caching is write-through */ -#define _PAGE_USER 0x010 /* matches one of the zone permission bits */ -#define _PAGE_SPECIAL 0x020 /* software: Special page */ -#define _PAGE_DIRTY 0x080 /* software: dirty page */ -#define _PAGE_RW 0x100 /* hardware: WR, anded with dirty in exception */ -#define _PAGE_EXEC 0x200 /* hardware: EX permission */ -#define _PAGE_ACCESSED 0x400 /* software: R: page referenced */ - -/* No page size encoding in the linux PTE */ -#define _PAGE_PSIZE 0 - -/* cache related flags non existing on 40x */ -#define _PAGE_COHERENT 0 - -#define _PAGE_KERNEL_RO 0 -#define _PAGE_KERNEL_ROX _PAGE_EXEC -#define _PAGE_KERNEL_RW (_PAGE_DIRTY | _PAGE_RW) -#define _PAGE_KERNEL_RWX (_PAGE_DIRTY | _PAGE_RW | _PAGE_EXEC) - -#define _PMD_PRESENT 0x400 /* PMD points to page of PTEs */ -#define _PMD_PRESENT_MASK _PMD_PRESENT -#define _PMD_BAD 0x802 -#define _PMD_SIZE_4M 0x0c0 -#define _PMD_SIZE_16M 0x0e0 -#define _PMD_USER 0 - -#define _PTE_NONE_MASK 0 - -/* Until my rework is finished, 40x still needs atomic PTE updates */ -#define PTE_ATOMIC_UPDATES 1 - -#define _PAGE_BASE_NC (_PAGE_PRESENT | _PAGE_ACCESSED) -#define _PAGE_BASE (_PAGE_BASE_NC) - -/* Permission masks used to generate the __P and __S table */ -#define PAGE_NONE __pgprot(_PAGE_BASE) -#define PAGE_SHARED __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW) -#define PAGE_SHARED_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW | _PAGE_EXEC) -#define PAGE_COPY __pgprot(_PAGE_BASE | _PAGE_USER) -#define PAGE_COPY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC) -#define PAGE_READONLY __pgprot(_PAGE_BASE | _PAGE_USER) -#define PAGE_READONLY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC) - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_NOHASH_32_PTE_40x_H */ diff --git a/arch/powerpc/include/asm/nohash/mmu.h b/arch/powerpc/include/asm/nohash/mmu.h index edc793e5f08f..8b1d252cd6a9 100644 --- a/arch/powerpc/include/asm/nohash/mmu.h +++ b/arch/powerpc/include/asm/nohash/mmu.h @@ -2,10 +2,7 @@ #ifndef _ASM_POWERPC_NOHASH_MMU_H_ #define _ASM_POWERPC_NOHASH_MMU_H_ -#if defined(CONFIG_40x) -/* 40x-style software loaded TLB */ -#include -#elif defined(CONFIG_44x) +#if defined(CONFIG_44x) /* 44x-style software loaded TLB */ #include #elif defined(CONFIG_PPC_BOOK3E_MMU) diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index b9492f2b0608..d2a0b29db3ea 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -18,9 +18,9 @@ #include /* Pickup Book E specific registers. */ -#if defined(CONFIG_BOOKE) || defined(CONFIG_40x) +#ifdef CONFIG_BOOKE #include -#endif /* CONFIG_BOOKE || CONFIG_40x */ +#endif #ifdef CONFIG_FSL_EMB_PERFMON #include @@ -236,14 +236,10 @@ /* Special Purpose Registers (SPRNs)*/ -#ifdef CONFIG_40x -#define SPRN_PID 0x3B1 /* Process ID */ -#else #define SPRN_PID 0x030 /* Process ID */ #ifdef CONFIG_BOOKE #define SPRN_PID0 SPRN_PID/* Process ID Register 0 */ #endif -#endif #define SPRN_CTR 0x009 /* Count Register */ #define SPRN_DSCR 0x11 @@ -1108,15 +1104,6 @@ * - SPRG2 indicator that we are in RTAS * - SPRG4 (603 only) pseudo TLB LRU data * - * 32-bit 40x: - * - SPRG0 scratch for exception vectors - * - SPRG1 scratch for exception vectors - * - SPRG2 scratch for exception vectors - * - SPRG4 scratch for exception vectors (not 403) - * - SPRG5 scratch for exception vectors (not 403) - * - SPRG6 scratch for exception vectors (not 403) - * - SPRG7 scratch for exception vectors (not 403) - * * 32-bit 440 and FSL BookE: * - SPRG0 scratch for exception vectors * - SPRG1 scratch for exception vectors (*) @@ -1208,16 +1195,6 @@ #define SPRN_SPRG_603_LRU SPRN_SPRG4 #endif -#ifdef CONFIG_40x -#define SPRN_SPRG_SCRATCH0 SPRN_SPRG0 -#define SPRN_SPRG_SCRATCH1 SPRN_SPRG1 -#define SPRN_SPRG_SCRATCH2 SPRN_SPRG2 -#define SPRN_SPRG_SCRATCH3 SPRN_SPRG4 -#define SPRN_SPRG_SCRATCH4 SPRN_SPRG5 -#define SPRN_SPRG_SCRATCH5 SPRN_SPRG6 -#define SPRN_SPRG_SCRATCH6 SPRN_SPRG7 -#endif - #ifdef CONFIG_BOOKE #define SPRN_SPRG_RSCRATCH0 SPRN_SPRG0 #define SPRN_SPRG_WSCRATCH0 SPRN_SPRG0 diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h index 262782f08fd4..533d8a0caddf 100644 --- a/arch/powerpc/include/asm/reg_booke.h +++ b/arch/powerpc/include/asm/reg_booke.h @@ -42,9 +42,6 @@ #define MSR_KERNEL (MSR_ | MSR_64BIT) #define MSR_USER32 (MSR_ | MSR_PR | MSR_EE) #define MSR_USER64 (MSR_USER32 | MSR_64BIT) -#elif defined (CONFIG_40x) -#define MSR_KERNEL (MSR_ME|MSR_RI|MSR_IR|MSR_DR|MSR_CE) -#define MSR_USER (MSR_KERNEL|MSR_PR|MSR_EE) #else #define MSR_KERNEL (MSR_ME|MSR_RI|MSR_CE) #define MSR_USER (MSR_KERNEL|MSR_PR|MSR_EE) @@ -157,7 +154,6 @@ #define SPRN_TLB3CFG 0x2B3 /* TLB 3 Config Register */ #define SPRN_EPR 0x2BE /* External Proxy Register */ #define SPRN_CCR1 0x378 /* Core Configuration Register 1 */ -#define SPRN_ZPR 0x3B0 /* Zone Protection Register (40x) */ #define SPRN_MAS7 0x3B0 /* MMU Assist Register 7 */ #define SPRN_MMUCR 0x3B2 /* MMU Control Register */ #define SPRN_CCR0 0x3B3 /* Core Configuration Register 0 */ @@ -166,7 +162,6 @@ #define SPRN_SGR 0x3B9 /* Storage Guarded Register */ #define SPRN_DCWR 0x3BA /* Data Cache Write-thru Register */ #define SPRN_SLER 0x3BB /* Little-endian real mode */ -#define SPRN_SU0R 0x3BC /* "User 0" real mode (40x) */ #define SPRN_DCMP 0x3D1 /* Data TLB Compare Register */ #define SPRN_ICDBDR 0x3D3 /* Instruction Cache Debug Data Register */ #define SPRN_EVPR 0x3D6 /* Exception Vector Prefix Register */ @@ -202,21 +197,6 @@ #define SPRN_TSR 0x150 /* Timer Status Register */ #define SPRN_TCR 0x154 /* Timer Control Register */ #endif /* Book E */ -#ifdef CONFIG_40x -#define SPRN_DBCR1 0x3BD /* Debug Control Register 1 */ -#define SPRN_ESR 0x3D4 /* Exception Syndrome Register */ -#define SPRN_DEAR 0x3D5 /* Data Error Address Register */ -#define SPRN_TSR 0x3D8 /* Timer Status Register */ -#define SPRN_TCR 0x3DA /* Timer Control Register */ -#define SPRN_SRR2 0x3DE /* Save/Restore Register 2 */ -#define SPRN_SRR3 0x3DF /* Save/Restore Register 3 */ -#define SPRN_DBSR 0x3F0 /* Debug Status Register */ -#define SPRN_DBCR0 0x3F2 /* Debug Control Register 0 */ -#define SPRN_DAC1 0x3F6 /* Data Address Compare 1 */ -#define SPRN_DAC2 0x3F7 /* Data Address Compare 2 */ -#define SPRN_CSRR0 SPRN_SRR2 /* Critical Save and Restore Register 0 */ -#define SPRN_CSRR1 SPRN_SRR3 /* Critical Save and Restore Register 1 */ -#endif #define SPRN_HACOP 0x15F /* Hypervisor Available Coprocessor Register */ /* Bit definitions for CCR1. */ @@ -320,20 +300,6 @@ #define DBSR_IAC12ATS 0x00000002 /* Instr Address Compare 1/2 Toggle */ #define DBSR_IAC34ATS 0x00000001 /* Instr Address Compare 3/4 Toggle */ #endif -#ifdef CONFIG_40x -#define DBSR_IC 0x80000000 /* Instruction Completion */ -#define DBSR_BT 0x40000000 /* Branch taken */ -#define DBSR_IRPT 0x20000000 /* Exception Debug Event */ -#define DBSR_TIE 0x10000000 /* Trap Instruction debug Event */ -#define DBSR_IAC1 0x04000000 /* Instruction Address Compare 1 Event */ -#define DBSR_IAC2 0x02000000 /* Instruction Address Compare 2 Event */ -#define DBSR_IAC3 0x00080000 /* Instruction Address Compare 3 Event */ -#define DBSR_IAC4 0x00040000 /* Instruction Address Compare 4 Event */ -#define DBSR_DAC1R 0x01000000 /* Data Address Compare 1 Read Event */ -#define DBSR_DAC1W 0x00800000 /* Data Address Compare 1 Write Event */ -#define DBSR_DAC2R 0x00400000 /* Data Address Compare 2 Read Event */ -#define DBSR_DAC2W 0x00200000 /* Data Address Compare 2 Write Event */ -#endif /* Bit definitions related to the ESR. */ #define ESR_MCI 0x80000000 /* Machine Check - Instruction */ @@ -355,69 +321,7 @@ #define ESR_SPV 0x00000080 /* Signal Processing operation */ /* Bit definitions related to the DBCR0. */ -#if defined(CONFIG_40x) -#define DBCR0_EDM 0x80000000 /* External Debug Mode */ -#define DBCR0_IDM 0x40000000 /* Internal Debug Mode */ -#define DBCR0_RST 0x30000000 /* all the bits in the RST field */ -#define DBCR0_RST_SYSTEM 0x30000000 /* System Reset */ -#define DBCR0_RST_CHIP 0x20000000 /* Chip Reset */ -#define DBCR0_RST_CORE 0x10000000 /* Core Reset */ -#define DBCR0_RST_NONE 0x00000000 /* No Reset */ -#define DBCR0_IC 0x08000000 /* Instruction Completion */ -#define DBCR0_ICMP DBCR0_IC -#define DBCR0_BT 0x04000000 /* Branch Taken */ -#define DBCR0_BRT DBCR0_BT -#define DBCR0_EDE 0x02000000 /* Exception Debug Event */ -#define DBCR0_IRPT DBCR0_EDE -#define DBCR0_TDE 0x01000000 /* TRAP Debug Event */ -#define DBCR0_IA1 0x00800000 /* Instr Addr compare 1 enable */ -#define DBCR0_IAC1 DBCR0_IA1 -#define DBCR0_IA2 0x00400000 /* Instr Addr compare 2 enable */ -#define DBCR0_IAC2 DBCR0_IA2 -#define DBCR0_IA12 0x00200000 /* Instr Addr 1-2 range enable */ -#define DBCR0_IA12X 0x00100000 /* Instr Addr 1-2 range eXclusive */ -#define DBCR0_IA3 0x00080000 /* Instr Addr compare 3 enable */ -#define DBCR0_IAC3 DBCR0_IA3 -#define DBCR0_IA4 0x00040000 /* Instr Addr compare 4 enable */ -#define DBCR0_IAC4 DBCR0_IA4 -#define DBCR0_IA34 0x00020000 /* Instr Addr 3-4 range Enable */ -#define DBCR0_IA34X 0x00010000 /* Instr Addr 3-4 range eXclusive */ -#define DBCR0_IA12T 0x00008000 /* Instr Addr 1-2 range Toggle */ -#define DBCR0_IA34T 0x00004000 /* Instr Addr 3-4 range Toggle */ -#define DBCR0_FT 0x00000001 /* Freeze Timers on debug event */ - -#define dbcr_iac_range(task) ((task)->thread.debug.dbcr0) -#define DBCR_IAC12I DBCR0_IA12 /* Range Inclusive */ -#define DBCR_IAC12X (DBCR0_IA12 | DBCR0_IA12X) /* Range Exclusive */ -#define DBCR_IAC12MODE (DBCR0_IA12 | DBCR0_IA12X) /* IAC 1-2 Mode Bits */ -#define DBCR_IAC34I DBCR0_IA34 /* Range Inclusive */ -#define DBCR_IAC34X (DBCR0_IA34 | DBCR0_IA34X) /* Range Exclusive */ -#define DBCR_IAC34MODE (DBCR0_IA34 | DBCR0_IA34X) /* IAC 3-4 Mode Bits */ - -/* Bit definitions related to the DBCR1. */ -#define DBCR1_DAC1R 0x80000000 /* DAC1 Read Debug Event */ -#define DBCR1_DAC2R 0x40000000 /* DAC2 Read Debug Event */ -#define DBCR1_DAC1W 0x20000000 /* DAC1 Write Debug Event */ -#define DBCR1_DAC2W 0x10000000 /* DAC2 Write Debug Event */ - -#define dbcr_dac(task) ((task)->thread.debug.dbcr1) -#define DBCR_DAC1R DBCR1_DAC1R -#define DBCR_DAC1W DBCR1_DAC1W -#define DBCR_DAC2R DBCR1_DAC2R -#define DBCR_DAC2W DBCR1_DAC2W - -/* - * Are there any active Debug Events represented in the - * Debug Control Registers? - */ -#define DBCR0_ACTIVE_EVENTS (DBCR0_ICMP | DBCR0_IAC1 | DBCR0_IAC2 | \ - DBCR0_IAC3 | DBCR0_IAC4) -#define DBCR1_ACTIVE_EVENTS (DBCR1_DAC1R | DBCR1_DAC2R | \ - DBCR1_DAC1W | DBCR1_DAC2W) -#define DBCR_ACTIVE_EVENTS(dbcr0, dbcr1) (((dbcr0) & DBCR0_ACTIVE_EVENTS) || \ - ((dbcr1) & DBCR1_ACTIVE_EVENTS)) - -#elif defined(CONFIG_BOOKE) +#ifdef CONFIG_BOOKE #define DBCR0_EDM 0x80000000 /* External Debug Mode */ #define DBCR0_IDM 0x40000000 /* Internal Debug Mode */ #define DBCR0_RST 0x30000000 /* all the bits in the RST field */ @@ -518,7 +422,7 @@ #define DBCR_ACTIVE_EVENTS(dbcr0, dbcr1) (((dbcr0) & DBCR0_ACTIVE_EVENTS) || \ ((dbcr1) & DBCR1_ACTIVE_EVENTS)) -#endif /* #elif defined(CONFIG_BOOKE) */ +#endif /* CONFIG_BOOKE */ /* Bit definitions related to the TCR. */ #define TCR_WP(x) (((x)&0x3)<<30) /* WDT Period */ diff --git a/arch/powerpc/include/asm/time.h b/arch/powerpc/include/asm/time.h index 8f789b597bae..8f9f3357b298 100644 --- a/arch/powerpc/include/asm/time.h +++ b/arch/powerpc/include/asm/time.h @@ -55,9 +55,6 @@ static inline u64 get_vtb(void) */ static inline u64 get_dec(void) { - if (IS_ENABLED(CONFIG_40x)) - return mfspr(SPRN_PIT); - return mfspr(SPRN_DEC); } @@ -68,9 +65,7 @@ static inline u64 get_dec(void) */ static inline void set_dec(u64 val) { - if (IS_ENABLED(CONFIG_40x)) - mtspr(SPRN_PIT, (u32)val); - else if (IS_ENABLED(CONFIG_BOOKE)) + if (IS_ENABLED(CONFIG_BOOKE)) mtspr(SPRN_DEC, val); else mtspr(SPRN_DEC, val - 1); diff --git a/arch/powerpc/include/asm/udbg.h b/arch/powerpc/include/asm/udbg.h index 0ea9e70ed78b..e07687fb3b96 100644 --- a/arch/powerpc/include/asm/udbg.h +++ b/arch/powerpc/include/asm/udbg.h @@ -45,7 +45,6 @@ extern void __init udbg_init_rtas_console(void); extern void __init udbg_init_debug_beat(void); extern void __init udbg_init_btext(void); extern void __init udbg_init_44x_as1(void); -extern void __init udbg_init_40x_realmode(void); extern void __init udbg_init_cpm(void); extern void __init udbg_init_usbgecko(void); extern void __init udbg_init_memcons(void); diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index fe2ef598e2ea..e67a95d8298d 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -97,7 +97,6 @@ obj-$(CONFIG_JUMP_LABEL) += jump_label.o extra-$(CONFIG_PPC64) := head_64.o extra-$(CONFIG_PPC_BOOK3S_32) := head_book3s_32.o -extra-$(CONFIG_40x) := head_40x.o extra-$(CONFIG_44x) := head_44x.o extra-$(CONFIG_FSL_BOOKE) := head_fsl_booke.o extra-$(CONFIG_PPC_8xx) := head_8xx.o diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index b12d7c049bfe..e5caefb72a69 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -56,7 +56,7 @@ #endif #ifdef CONFIG_PPC32 -#if defined(CONFIG_BOOKE) || defined(CONFIG_40x) +#ifdef CONFIG_BOOKE #include "head_booke.h" #endif #endif @@ -366,7 +366,7 @@ int main(void) #if defined(CONFIG_PPC32) -#if defined(CONFIG_BOOKE) || defined(CONFIG_40x) +#ifdef CONFIG_BOOKE DEFINE(EXC_LVL_SIZE, STACK_EXC_LVL_FRAME_SIZE); DEFINE(MAS0, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, mas0)); /* we overload MMUCR for 44x on MAS0 since they are mutually exclusive */ diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index f2fcd29aab23..551a99d27936 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -1258,282 +1258,6 @@ static struct cpu_spec __initdata cpu_specs[] = { .platform = "ppc823", }, #endif /* CONFIG_PPC_8xx */ -#ifdef CONFIG_40x - { /* STB 04xxx */ - .pvr_mask = 0xffff0000, - .pvr_value = 0x41810000, - .cpu_name = "STB04xxx", - .cpu_features = CPU_FTRS_40X, - .cpu_user_features = PPC_FEATURE_32 | - PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, - .mmu_features = MMU_FTR_TYPE_40x, - .icache_bsize = 32, - .dcache_bsize = 32, - .machine_check = machine_check_4xx, - .platform = "ppc405", - }, - { /* NP405L */ - .pvr_mask = 0xffff0000, - .pvr_value = 0x41610000, - .cpu_name = "NP405L", - .cpu_features = CPU_FTRS_40X, - .cpu_user_features = PPC_FEATURE_32 | - PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, - .mmu_features = MMU_FTR_TYPE_40x, - .icache_bsize = 32, - .dcache_bsize = 32, - .machine_check = machine_check_4xx, - .platform = "ppc405", - }, - { /* NP4GS3 */ - .pvr_mask = 0xffff0000, - .pvr_value = 0x40B10000, - .cpu_name = "NP4GS3", - .cpu_features = CPU_FTRS_40X, - .cpu_user_features = PPC_FEATURE_32 | - PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, - .mmu_features = MMU_FTR_TYPE_40x, - .icache_bsize = 32, - .dcache_bsize = 32, - .machine_check = machine_check_4xx, - .platform = "ppc405", - }, - { /* NP405H */ - .pvr_mask = 0xffff0000, - .pvr_value = 0x41410000, - .cpu_name = "NP405H", - .cpu_features = CPU_FTRS_40X, - .cpu_user_features = PPC_FEATURE_32 | - PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, - .mmu_features = MMU_FTR_TYPE_40x, - .icache_bsize = 32, - .dcache_bsize = 32, - .machine_check = machine_check_4xx, - .platform = "ppc405", - }, - { /* 405GPr */ - .pvr_mask = 0xffff0000, - .pvr_value = 0x50910000, - .cpu_name = "405GPr", - .cpu_features = CPU_FTRS_40X, - .cpu_user_features = PPC_FEATURE_32 | - PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, - .mmu_features = MMU_FTR_TYPE_40x, - .icache_bsize = 32, - .dcache_bsize = 32, - .machine_check = machine_check_4xx, - .platform = "ppc405", - }, - { /* STBx25xx */ - .pvr_mask = 0xffff0000, - .pvr_value = 0x51510000, - .cpu_name = "STBx25xx", - .cpu_features = CPU_FTRS_40X, - .cpu_user_features = PPC_FEATURE_32 | - PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, - .mmu_features = MMU_FTR_TYPE_40x, - .icache_bsize = 32, - .dcache_bsize = 32, - .machine_check = machine_check_4xx, - .platform = "ppc405", - }, - { /* 405LP */ - .pvr_mask = 0xffff0000, - .pvr_value = 0x41F10000, - .cpu_name = "405LP", - .cpu_features = CPU_FTRS_40X, - .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU, - .mmu_features = MMU_FTR_TYPE_40x, - .icache_bsize = 32, - .dcache_bsize = 32, - .machine_check = machine_check_4xx, - .platform = "ppc405", - }, - { /* 405EP */ - .pvr_mask = 0xffff0000, - .pvr_value = 0x51210000, - .cpu_name = "405EP", - .cpu_features = CPU_FTRS_40X, - .cpu_user_features = PPC_FEATURE_32 | - PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, - .mmu_features = MMU_FTR_TYPE_40x, - .icache_bsize = 32, - .dcache_bsize = 32, - .machine_check = machine_check_4xx, - .platform = "ppc405", - }, - { /* 405EX Rev. A/B with Security */ - .pvr_mask = 0xffff000f, - .pvr_value = 0x12910007, - .cpu_name = "405EX Rev. A/B", - .cpu_features = CPU_FTRS_40X, - .cpu_user_features = PPC_FEATURE_32 | - PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, - .mmu_features = MMU_FTR_TYPE_40x, - .icache_bsize = 32, - .dcache_bsize = 32, - .machine_check = machine_check_4xx, - .platform = "ppc405", - }, - { /* 405EX Rev. C without Security */ - .pvr_mask = 0xffff000f, - .pvr_value = 0x1291000d, - .cpu_name = "405EX Rev. C", - .cpu_features = CPU_FTRS_40X, - .cpu_user_features = PPC_FEATURE_32 | - PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, - .mmu_features = MMU_FTR_TYPE_40x, - .icache_bsize = 32, - .dcache_bsize = 32, - .machine_check = machine_check_4xx, - .platform = "ppc405", - }, - { /* 405EX Rev. C with Security */ - .pvr_mask = 0xffff000f, - .pvr_value = 0x1291000f, - .cpu_name = "405EX Rev. C", - .cpu_features = CPU_FTRS_40X, - .cpu_user_features = PPC_FEATURE_32 | - PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, - .mmu_features = MMU_FTR_TYPE_40x, - .icache_bsize = 32, - .dcache_bsize = 32, - .machine_check = machine_check_4xx, - .platform = "ppc405", - }, - { /* 405EX Rev. D without Security */ - .pvr_mask = 0xffff000f, - .pvr_value = 0x12910003, - .cpu_name = "405EX Rev. D", - .cpu_features = CPU_FTRS_40X, - .cpu_user_features = PPC_FEATURE_32 | - PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, - .mmu_features = MMU_FTR_TYPE_40x, - .icache_bsize = 32, - .dcache_bsize = 32, - .machine_check = machine_check_4xx, - .platform = "ppc405", - }, - { /* 405EX Rev. D with Security */ - .pvr_mask = 0xffff000f, - .pvr_value = 0x12910005, - .cpu_name = "405EX Rev. D", - .cpu_features = CPU_FTRS_40X, - .cpu_user_features = PPC_FEATURE_32 | - PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, - .mmu_features = MMU_FTR_TYPE_40x, - .icache_bsize = 32, - .dcache_bsize = 32, - .machine_check = machine_check_4xx, - .platform = "ppc405", - }, - { /* 405EXr Rev. A/B without Security */ - .pvr_mask = 0xffff000f, - .pvr_value = 0x12910001, - .cpu_name = "405EXr Rev. A/B", - .cpu_features = CPU_FTRS_40X, - .cpu_user_features = PPC_FEATURE_32 | - PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, - .mmu_features = MMU_FTR_TYPE_40x, - .icache_bsize = 32, - .dcache_bsize = 32, - .machine_check = machine_check_4xx, - .platform = "ppc405", - }, - { /* 405EXr Rev. C without Security */ - .pvr_mask = 0xffff000f, - .pvr_value = 0x12910009, - .cpu_name = "405EXr Rev. C", - .cpu_features = CPU_FTRS_40X, - .cpu_user_features = PPC_FEATURE_32 | - PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, - .mmu_features = MMU_FTR_TYPE_40x, - .icache_bsize = 32, - .dcache_bsize = 32, - .machine_check = machine_check_4xx, - .platform = "ppc405", - }, - { /* 405EXr Rev. C with Security */ - .pvr_mask = 0xffff000f, - .pvr_value = 0x1291000b, - .cpu_name = "405EXr Rev. C", - .cpu_features = CPU_FTRS_40X, - .cpu_user_features = PPC_FEATURE_32 | - PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, - .mmu_features = MMU_FTR_TYPE_40x, - .icache_bsize = 32, - .dcache_bsize = 32, - .machine_check = machine_check_4xx, - .platform = "ppc405", - }, - { /* 405EXr Rev. D without Security */ - .pvr_mask = 0xffff000f, - .pvr_value = 0x12910000, - .cpu_name = "405EXr Rev. D", - .cpu_features = CPU_FTRS_40X, - .cpu_user_features = PPC_FEATURE_32 | - PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, - .mmu_features = MMU_FTR_TYPE_40x, - .icache_bsize = 32, - .dcache_bsize = 32, - .machine_check = machine_check_4xx, - .platform = "ppc405", - }, - { /* 405EXr Rev. D with Security */ - .pvr_mask = 0xffff000f, - .pvr_value = 0x12910002, - .cpu_name = "405EXr Rev. D", - .cpu_features = CPU_FTRS_40X, - .cpu_user_features = PPC_FEATURE_32 | - PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, - .mmu_features = MMU_FTR_TYPE_40x, - .icache_bsize = 32, - .dcache_bsize = 32, - .machine_check = machine_check_4xx, - .platform = "ppc405", - }, - { - /* 405EZ */ - .pvr_mask = 0xffff0000, - .pvr_value = 0x41510000, - .cpu_name = "405EZ", - .cpu_features = CPU_FTRS_40X, - .cpu_user_features = PPC_FEATURE_32 | - PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, - .mmu_features = MMU_FTR_TYPE_40x, - .icache_bsize = 32, - .dcache_bsize = 32, - .machine_check = machine_check_4xx, - .platform = "ppc405", - }, - { /* APM8018X */ - .pvr_mask = 0xffff0000, - .pvr_value = 0x7ff11432, - .cpu_name = "APM8018X", - .cpu_features = CPU_FTRS_40X, - .cpu_user_features = PPC_FEATURE_32 | - PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, - .mmu_features = MMU_FTR_TYPE_40x, - .icache_bsize = 32, - .dcache_bsize = 32, - .machine_check = machine_check_4xx, - .platform = "ppc405", - }, - { /* default match */ - .pvr_mask = 0x00000000, - .pvr_value = 0x00000000, - .cpu_name = "(generic 40x PPC)", - .cpu_features = CPU_FTRS_40X, - .cpu_user_features = PPC_FEATURE_32 | - PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, - .mmu_features = MMU_FTR_TYPE_40x, - .icache_bsize = 32, - .dcache_bsize = 32, - .machine_check = machine_check_4xx, - .platform = "ppc405", - } - -#endif /* CONFIG_40x */ #ifdef CONFIG_44x #ifndef CONFIG_PPC_47x { diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S index 58177c71dfd4..c203cc4a81c8 100644 --- a/arch/powerpc/kernel/entry_32.S +++ b/arch/powerpc/kernel/entry_32.S @@ -104,28 +104,6 @@ crit_transfer_to_handler: _ASM_NOKPROBE_SYMBOL(crit_transfer_to_handler) #endif -#ifdef CONFIG_40x - .globl crit_transfer_to_handler -crit_transfer_to_handler: - lwz r0,crit_r10@l(0) - stw r0,GPR10(r11) - lwz r0,crit_r11@l(0) - stw r0,GPR11(r11) - mfspr r0,SPRN_SRR0 - stw r0,crit_srr0@l(0) - mfspr r0,SPRN_SRR1 - stw r0,crit_srr1@l(0) - - /* set the stack limit to the current stack */ - mfspr r8,SPRN_SPRG_THREAD - lwz r0,KSP_LIMIT(r8) - stw r0,saved_ksp_limit@l(0) - rlwinm r0,r1,0,0,(31 - THREAD_SHIFT) - stw r0,KSP_LIMIT(r8) - /* fall through */ -_ASM_NOKPROBE_SYMBOL(crit_transfer_to_handler) -#endif - /* * This code finishes saving the registers to the exception frame * and jumps to the appropriate handler for the exception, turning @@ -155,7 +133,7 @@ transfer_to_handler: addi r2, r12, -THREAD addi r11,r1,STACK_FRAME_OVERHEAD stw r11,PT_REGS(r12) -#if defined(CONFIG_40x) || defined(CONFIG_BOOKE) +#ifdef CONFIG_BOOKE /* Check to see if the dbcr0 register is set up to debug. Use the internal debug mode bit to do this. */ lwz r12,THREAD_DBCR0(r12) @@ -165,7 +143,7 @@ transfer_to_handler: #ifdef CONFIG_PPC_BOOK3S_32 kuep_lock r11, r12 #endif -#if defined(CONFIG_40x) || defined(CONFIG_BOOKE) +#ifdef CONFIG_BOOKE beq+ 3f /* From user and task is ptraced - load up global dbcr0 */ li r12,-1 /* clear all pending debug events */ @@ -235,9 +213,6 @@ transfer_to_handler_cont: mtspr SPRN_SRR1,r10 mtlr r9 rfi /* jump to handler, enable MMU */ -#ifdef CONFIG_40x - b . /* Prevent prefetch past rfi */ -#endif #if defined (CONFIG_PPC_BOOK3S_32) || defined(CONFIG_E500) 4: rlwinm r12,r12,0,~_TLF_NAPPING @@ -267,9 +242,6 @@ _ASM_NOKPROBE_SYMBOL(transfer_to_handler_cont) mtspr SPRN_SRR0,r12 mtspr SPRN_SRR1,r0 rfi -#ifdef CONFIG_40x - b . /* Prevent prefetch past rfi */ -#endif reenable_mmu: /* @@ -328,9 +300,6 @@ stack_ovf: mtspr SPRN_SRR0,r9 mtspr SPRN_SRR1,r10 rfi -#ifdef CONFIG_40x - b . /* Prevent prefetch past rfi */ -#endif _ASM_NOKPROBE_SYMBOL(stack_ovf) #endif @@ -478,9 +447,6 @@ syscall_exit_finish: mtspr SPRN_SRR0,r7 mtspr SPRN_SRR1,r8 rfi -#ifdef CONFIG_40x - b . /* Prevent prefetch past rfi */ -#endif _ASM_NOKPROBE_SYMBOL(syscall_exit_finish) #ifdef CONFIG_44x 2: li r7,0 @@ -611,9 +577,6 @@ ret_from_kernel_syscall: mtspr SPRN_SRR0, r9 mtspr SPRN_SRR1, r10 rfi -#ifdef CONFIG_40x - b . /* Prevent prefetch past rfi */ -#endif _ASM_NOKPROBE_SYMBOL(ret_from_kernel_syscall) /* @@ -817,9 +780,6 @@ fast_exception_return: REST_GPR(12, r11) lwz r11,GPR11(r11) rfi -#ifdef CONFIG_40x - b . /* Prevent prefetch past rfi */ -#endif _ASM_NOKPROBE_SYMBOL(fast_exception_return) #if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE)) @@ -1087,18 +1047,6 @@ _ASM_NOKPROBE_SYMBOL(exc_exit_restart) * time of the critical interrupt. * */ -#ifdef CONFIG_40x -#define PPC_40x_TURN_OFF_MSR_DR \ - /* avoid any possible TLB misses here by turning off MSR.DR, we \ - * assume the instructions here are mapped by a pinned TLB entry */ \ - li r10,MSR_IR; \ - mtmsr r10; \ - isync; \ - tophys(r1, r1); -#else -#define PPC_40x_TURN_OFF_MSR_DR -#endif - #define RET_FROM_EXC_LEVEL(exc_lvl_srr0, exc_lvl_srr1, exc_lvl_rfi) \ REST_NVGPRS(r1); \ lwz r3,_MSR(r1); \ @@ -1118,7 +1066,6 @@ _ASM_NOKPROBE_SYMBOL(exc_exit_restart) mtlr r11; \ lwz r10,_CCR(r1); \ mtcrf 0xff,r10; \ - PPC_40x_TURN_OFF_MSR_DR; \ lwz r9,_DEAR(r1); \ lwz r10,_ESR(r1); \ mtspr SPRN_DEAR,r9; \ @@ -1169,24 +1116,6 @@ _ASM_NOKPROBE_SYMBOL(exc_exit_restart) #define RESTORE_MMU_REGS #endif -#ifdef CONFIG_40x - .globl ret_from_crit_exc -ret_from_crit_exc: - mfspr r9,SPRN_SPRG_THREAD - lis r10,saved_ksp_limit@ha; - lwz r10,saved_ksp_limit@l(r10); - tovirt(r9,r9); - stw r10,KSP_LIMIT(r9) - lis r9,crit_srr0@ha; - lwz r9,crit_srr0@l(r9); - lis r10,crit_srr1@ha; - lwz r10,crit_srr1@l(r10); - mtspr SPRN_SRR0,r9; - mtspr SPRN_SRR1,r10; - RET_FROM_EXC_LEVEL(SPRN_CSRR0, SPRN_CSRR1, PPC_RFCI) -_ASM_NOKPROBE_SYMBOL(ret_from_crit_exc) -#endif /* CONFIG_40x */ - #ifdef CONFIG_BOOKE .globl ret_from_crit_exc ret_from_crit_exc: diff --git a/arch/powerpc/kernel/head_32.h b/arch/powerpc/kernel/head_32.h index 541664d95702..0ca6a13261b9 100644 --- a/arch/powerpc/kernel/head_32.h +++ b/arch/powerpc/kernel/head_32.h @@ -97,16 +97,12 @@ mfspr r12,SPRN_SRR0 mfspr r9,SPRN_SRR1 #endif -#ifdef CONFIG_40x - rlwinm r9,r9,0,14,12 /* clear MSR_WE (necessary?) */ -#else #ifdef CONFIG_VMAP_STACK li r10, MSR_KERNEL & ~MSR_IR /* can take exceptions */ #else li r10,MSR_KERNEL & ~(MSR_IR|MSR_DR) /* can take exceptions */ #endif mtmsr r10 /* (except for mach check in rtas) */ -#endif stw r0,GPR0(r11) lis r10,STACK_FRAME_REGS_MARKER@ha /* exception frame marker */ addi r10,r10,STACK_FRAME_REGS_MARKER@l @@ -147,16 +143,12 @@ mfcr r10 rlwinm r10,r10,0,4,2 /* Clear SO bit in CR */ stw r10,_CCR(r11) /* save registers */ -#ifdef CONFIG_40x - rlwinm r9,r9,0,14,12 /* clear MSR_WE (necessary?) */ -#else #ifdef CONFIG_VMAP_STACK LOAD_REG_IMMEDIATE(r10, MSR_KERNEL & ~MSR_IR) /* can take exceptions */ #else LOAD_REG_IMMEDIATE(r10, MSR_KERNEL & ~(MSR_IR|MSR_DR)) /* can take exceptions */ #endif mtmsr r10 /* (except for mach check in rtas) */ -#endif lis r10,STACK_FRAME_REGS_MARKER@ha /* exception frame marker */ stw r2,GPR2(r11) addi r10,r10,STACK_FRAME_REGS_MARKER@l @@ -170,29 +162,7 @@ addi r11,r1,STACK_FRAME_OVERHEAD addi r2,r12,-THREAD stw r11,PT_REGS(r12) -#if defined(CONFIG_40x) - /* Check to see if the dbcr0 register is set up to debug. Use the - internal debug mode bit to do this. */ - lwz r12,THREAD_DBCR0(r12) - andis. r12,r12,DBCR0_IDM@h -#endif ACCOUNT_CPU_USER_ENTRY(r2, r11, r12) -#if defined(CONFIG_40x) - beq+ 3f - /* From user and task is ptraced - load up global dbcr0 */ - li r12,-1 /* clear all pending debug events */ - mtspr SPRN_DBSR,r12 - lis r11,global_dbcr0@ha - tophys(r11,r11) - addi r11,r11,global_dbcr0@l - lwz r12,0(r11) - mtspr SPRN_DBCR0,r12 - lwz r12,4(r11) - addi r12,r12,-1 - stw r12,4(r11) -#endif - -3: tovirt_novmstack r2, r2 /* set r2 to current */ lis r11, transfer_to_syscall@h ori r11, r11, transfer_to_syscall@l @@ -213,9 +183,6 @@ mtspr SPRN_SRR1,r10 mtspr SPRN_SRR0,r11 rfi /* jump to handler, enable MMU */ -#ifdef CONFIG_40x - b . /* Prevent prefetch past rfi */ -#endif 99: b ret_from_kernel_syscall .endm diff --git a/arch/powerpc/kernel/head_40x.S b/arch/powerpc/kernel/head_40x.S deleted file mode 100644 index a1ae00689e0f..000000000000 --- a/arch/powerpc/kernel/head_40x.S +++ /dev/null @@ -1,715 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright (c) 1995-1996 Gary Thomas - * Initial PowerPC version. - * Copyright (c) 1996 Cort Dougan - * Rewritten for PReP - * Copyright (c) 1996 Paul Mackerras - * Low-level exception handers, MMU support, and rewrite. - * Copyright (c) 1997 Dan Malek - * PowerPC 8xx modifications. - * Copyright (c) 1998-1999 TiVo, Inc. - * PowerPC 403GCX modifications. - * Copyright (c) 1999 Grant Erickson - * PowerPC 403GCX/405GP modifications. - * Copyright 2000 MontaVista Software Inc. - * PPC405 modifications - * PowerPC 403GCX/405GP modifications. - * Author: MontaVista Software, Inc. - * frank_rowand@mvista.com or source@mvista.com - * debbie_chu@mvista.com - * - * Module name: head_4xx.S - * - * Description: - * Kernel execution entry point code. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "head_32.h" - -/* As with the other PowerPC ports, it is expected that when code - * execution begins here, the following registers contain valid, yet - * optional, information: - * - * r3 - Board info structure pointer (DRAM, frequency, MAC address, etc.) - * r4 - Starting address of the init RAM disk - * r5 - Ending address of the init RAM disk - * r6 - Start of kernel command line string (e.g. "mem=96m") - * r7 - End of kernel command line string - * - * This is all going to change RSN when we add bi_recs....... -- Dan - */ - __HEAD -_ENTRY(_stext); -_ENTRY(_start); - - mr r31,r3 /* save device tree ptr */ - - /* We have to turn on the MMU right away so we get cache modes - * set correctly. - */ - bl initial_mmu - -/* We now have the lower 16 Meg mapped into TLB entries, and the caches - * ready to work. - */ -turn_on_mmu: - lis r0,MSR_KERNEL@h - ori r0,r0,MSR_KERNEL@l - mtspr SPRN_SRR1,r0 - lis r0,start_here@h - ori r0,r0,start_here@l - mtspr SPRN_SRR0,r0 - rfi /* enables MMU */ - b . /* prevent prefetch past rfi */ - -/* - * This area is used for temporarily saving registers during the - * critical exception prolog. - */ - . = 0xc0 -crit_save: -_ENTRY(crit_r10) - .space 4 -_ENTRY(crit_r11) - .space 4 -_ENTRY(crit_srr0) - .space 4 -_ENTRY(crit_srr1) - .space 4 -_ENTRY(saved_ksp_limit) - .space 4 - -/* - * Exception prolog for critical exceptions. This is a little different - * from the normal exception prolog above since a critical exception - * can potentially occur at any point during normal exception processing. - * Thus we cannot use the same SPRG registers as the normal prolog above. - * Instead we use a couple of words of memory at low physical addresses. - * This is OK since we don't support SMP on these processors. - */ -#define CRITICAL_EXCEPTION_PROLOG \ - stw r10,crit_r10@l(0); /* save two registers to work with */\ - stw r11,crit_r11@l(0); \ - mfcr r10; /* save CR in r10 for now */\ - mfspr r11,SPRN_SRR3; /* check whether user or kernel */\ - andi. r11,r11,MSR_PR; \ - lis r11,critirq_ctx@ha; \ - tophys(r11,r11); \ - lwz r11,critirq_ctx@l(r11); \ - beq 1f; \ - /* COMING FROM USER MODE */ \ - mfspr r11,SPRN_SPRG_THREAD; /* if from user, start at top of */\ - lwz r11,TASK_STACK-THREAD(r11); /* this thread's kernel stack */\ -1: addi r11,r11,THREAD_SIZE-INT_FRAME_SIZE; /* Alloc an excpt frm */\ - tophys(r11,r11); \ - stw r10,_CCR(r11); /* save various registers */\ - stw r12,GPR12(r11); \ - stw r9,GPR9(r11); \ - mflr r10; \ - stw r10,_LINK(r11); \ - mfspr r12,SPRN_DEAR; /* save DEAR and ESR in the frame */\ - stw r12,_DEAR(r11); /* since they may have had stuff */\ - mfspr r9,SPRN_ESR; /* in them at the point where the */\ - stw r9,_ESR(r11); /* exception was taken */\ - mfspr r12,SPRN_SRR2; \ - stw r1,GPR1(r11); \ - mfspr r9,SPRN_SRR3; \ - stw r1,0(r11); \ - tovirt(r1,r11); \ - rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\ - stw r0,GPR0(r11); \ - lis r10, STACK_FRAME_REGS_MARKER@ha; /* exception frame marker */\ - addi r10, r10, STACK_FRAME_REGS_MARKER@l; \ - stw r10, 8(r11); \ - SAVE_4GPRS(3, r11); \ - SAVE_2GPRS(7, r11) - - /* - * State at this point: - * r9 saved in stack frame, now saved SRR3 & ~MSR_WE - * r10 saved in crit_r10 and in stack frame, trashed - * r11 saved in crit_r11 and in stack frame, - * now phys stack/exception frame pointer - * r12 saved in stack frame, now saved SRR2 - * CR saved in stack frame, CR0.EQ = !SRR3.PR - * LR, DEAR, ESR in stack frame - * r1 saved in stack frame, now virt stack/excframe pointer - * r0, r3-r8 saved in stack frame - */ - -/* - * Exception vectors. - */ -#define CRITICAL_EXCEPTION(n, label, hdlr) \ - START_EXCEPTION(n, label); \ - CRITICAL_EXCEPTION_PROLOG; \ - addi r3,r1,STACK_FRAME_OVERHEAD; \ - EXC_XFER_TEMPLATE(hdlr, n+2, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \ - crit_transfer_to_handler, ret_from_crit_exc) - -/* - * 0x0100 - Critical Interrupt Exception - */ - CRITICAL_EXCEPTION(0x0100, CriticalInterrupt, unknown_exception) - -/* - * 0x0200 - Machine Check Exception - */ - CRITICAL_EXCEPTION(0x0200, MachineCheck, machine_check_exception) - -/* - * 0x0300 - Data Storage Exception - * This happens for just a few reasons. U0 set (but we don't do that), - * or zone protection fault (user violation, write to protected page). - * The other Data TLB exceptions bail out to this point - * if they can't resolve the lightweight TLB fault. - */ - START_EXCEPTION(0x0300, DataStorage) - EXCEPTION_PROLOG - mfspr r5, SPRN_ESR /* Grab the ESR, save it, pass arg3 */ - stw r5, _ESR(r11) - mfspr r4, SPRN_DEAR /* Grab the DEAR, save it, pass arg2 */ - stw r4, _DEAR(r11) - EXC_XFER_LITE(0x300, handle_page_fault) - -/* - * 0x0400 - Instruction Storage Exception - * This is caused by a fetch from non-execute or guarded pages. - */ - START_EXCEPTION(0x0400, InstructionAccess) - EXCEPTION_PROLOG - mr r4,r12 /* Pass SRR0 as arg2 */ - stw r4, _DEAR(r11) - li r5,0 /* Pass zero as arg3 */ - EXC_XFER_LITE(0x400, handle_page_fault) - -/* 0x0500 - External Interrupt Exception */ - EXCEPTION(0x0500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE) - -/* 0x0600 - Alignment Exception */ - START_EXCEPTION(0x0600, Alignment) - EXCEPTION_PROLOG - mfspr r4,SPRN_DEAR /* Grab the DEAR and save it */ - stw r4,_DEAR(r11) - addi r3,r1,STACK_FRAME_OVERHEAD - EXC_XFER_STD(0x600, alignment_exception) - -/* 0x0700 - Program Exception */ - START_EXCEPTION(0x0700, ProgramCheck) - EXCEPTION_PROLOG - mfspr r4,SPRN_ESR /* Grab the ESR and save it */ - stw r4,_ESR(r11) - addi r3,r1,STACK_FRAME_OVERHEAD - EXC_XFER_STD(0x700, program_check_exception) - - EXCEPTION(0x0800, Trap_08, unknown_exception, EXC_XFER_STD) - EXCEPTION(0x0900, Trap_09, unknown_exception, EXC_XFER_STD) - EXCEPTION(0x0A00, Trap_0A, unknown_exception, EXC_XFER_STD) - EXCEPTION(0x0B00, Trap_0B, unknown_exception, EXC_XFER_STD) - -/* 0x0C00 - System Call Exception */ - START_EXCEPTION(0x0C00, SystemCall) - SYSCALL_ENTRY 0xc00 -/* Trap_0D is commented out to get more space for system call exception */ - -/* EXCEPTION(0x0D00, Trap_0D, unknown_exception, EXC_XFER_STD) */ - EXCEPTION(0x0E00, Trap_0E, unknown_exception, EXC_XFER_STD) - EXCEPTION(0x0F00, Trap_0F, unknown_exception, EXC_XFER_STD) - -/* 0x1000 - Programmable Interval Timer (PIT) Exception */ - . = 0x1000 - b Decrementer - -/* 0x1010 - Fixed Interval Timer (FIT) Exception -*/ - . = 0x1010 - b FITException - -/* 0x1020 - Watchdog Timer (WDT) Exception -*/ - . = 0x1020 - b WDTException - -/* 0x1100 - Data TLB Miss Exception - * As the name implies, translation is not in the MMU, so search the - * page tables and fix it. The only purpose of this function is to - * load TLB entries from the page table if they exist. - */ - START_EXCEPTION(0x1100, DTLBMiss) - mtspr SPRN_SPRG_SCRATCH0, r10 /* Save some working registers */ - mtspr SPRN_SPRG_SCRATCH1, r11 - mtspr SPRN_SPRG_SCRATCH3, r12 - mtspr SPRN_SPRG_SCRATCH4, r9 - mfcr r12 - mfspr r9, SPRN_PID - mtspr SPRN_SPRG_SCRATCH5, r9 - mfspr r10, SPRN_DEAR /* Get faulting address */ - - /* If we are faulting a kernel address, we have to use the - * kernel page tables. - */ - lis r11, PAGE_OFFSET@h - cmplw r10, r11 - blt+ 3f - lis r11, swapper_pg_dir@h - ori r11, r11, swapper_pg_dir@l - li r9, 0 - mtspr SPRN_PID, r9 /* TLB will have 0 TID */ - b 4f - - /* Get the PGD for the current thread. - */ -3: - mfspr r11,SPRN_SPRG_THREAD - lwz r11,PGDIR(r11) -4: - tophys(r11, r11) - rlwimi r11, r10, 12, 20, 29 /* Create L1 (pgdir/pmd) address */ - lwz r11, 0(r11) /* Get L1 entry */ - andi. r9, r11, _PMD_PRESENT /* Check if it points to a PTE page */ - beq 2f /* Bail if no table */ - - rlwimi r11, r10, 22, 20, 29 /* Compute PTE address */ - lwz r11, 0(r11) /* Get Linux PTE */ - li r9, _PAGE_PRESENT | _PAGE_ACCESSED - andc. r9, r9, r11 /* Check permission */ - bne 5f - - rlwinm r9, r11, 1, _PAGE_RW /* dirty => rw */ - and r9, r9, r11 /* hwwrite = dirty & rw */ - rlwimi r11, r9, 0, _PAGE_RW /* replace rw by hwwrite */ - - /* Create TLB tag. This is the faulting address plus a static - * set of bits. These are size, valid, E, U0. - */ - li r9, 0x00c0 - rlwimi r10, r9, 0, 20, 31 - - b finish_tlb_load - -2: /* Check for possible large-page pmd entry */ - rlwinm. r9, r11, 2, 22, 24 - beq 5f - - /* Create TLB tag. This is the faulting address, plus a static - * set of bits (valid, E, U0) plus the size from the PMD. - */ - ori r9, r9, 0x40 - rlwimi r10, r9, 0, 20, 31 - - b finish_tlb_load - -5: - /* The bailout. Restore registers to pre-exception conditions - * and call the heavyweights to help us out. - */ - mfspr r9, SPRN_SPRG_SCRATCH5 - mtspr SPRN_PID, r9 - mtcr r12 - mfspr r9, SPRN_SPRG_SCRATCH4 - mfspr r12, SPRN_SPRG_SCRATCH3 - mfspr r11, SPRN_SPRG_SCRATCH1 - mfspr r10, SPRN_SPRG_SCRATCH0 - b DataStorage - -/* 0x1200 - Instruction TLB Miss Exception - * Nearly the same as above, except we get our information from different - * registers and bailout to a different point. - */ - START_EXCEPTION(0x1200, ITLBMiss) - mtspr SPRN_SPRG_SCRATCH0, r10 /* Save some working registers */ - mtspr SPRN_SPRG_SCRATCH1, r11 - mtspr SPRN_SPRG_SCRATCH3, r12 - mtspr SPRN_SPRG_SCRATCH4, r9 - mfcr r12 - mfspr r9, SPRN_PID - mtspr SPRN_SPRG_SCRATCH5, r9 - mfspr r10, SPRN_SRR0 /* Get faulting address */ - - /* If we are faulting a kernel address, we have to use the - * kernel page tables. - */ - lis r11, PAGE_OFFSET@h - cmplw r10, r11 - blt+ 3f - lis r11, swapper_pg_dir@h - ori r11, r11, swapper_pg_dir@l - li r9, 0 - mtspr SPRN_PID, r9 /* TLB will have 0 TID */ - b 4f - - /* Get the PGD for the current thread. - */ -3: - mfspr r11,SPRN_SPRG_THREAD - lwz r11,PGDIR(r11) -4: - tophys(r11, r11) - rlwimi r11, r10, 12, 20, 29 /* Create L1 (pgdir/pmd) address */ - lwz r11, 0(r11) /* Get L1 entry */ - andi. r9, r11, _PMD_PRESENT /* Check if it points to a PTE page */ - beq 2f /* Bail if no table */ - - rlwimi r11, r10, 22, 20, 29 /* Compute PTE address */ - lwz r11, 0(r11) /* Get Linux PTE */ - li r9, _PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC - andc. r9, r9, r11 /* Check permission */ - bne 5f - - rlwinm r9, r11, 1, _PAGE_RW /* dirty => rw */ - and r9, r9, r11 /* hwwrite = dirty & rw */ - rlwimi r11, r9, 0, _PAGE_RW /* replace rw by hwwrite */ - - /* Create TLB tag. This is the faulting address plus a static - * set of bits. These are size, valid, E, U0. - */ - li r9, 0x00c0 - rlwimi r10, r9, 0, 20, 31 - - b finish_tlb_load - -2: /* Check for possible large-page pmd entry */ - rlwinm. r9, r11, 2, 22, 24 - beq 5f - - /* Create TLB tag. This is the faulting address, plus a static - * set of bits (valid, E, U0) plus the size from the PMD. - */ - ori r9, r9, 0x40 - rlwimi r10, r9, 0, 20, 31 - - b finish_tlb_load - -5: - /* The bailout. Restore registers to pre-exception conditions - * and call the heavyweights to help us out. - */ - mfspr r9, SPRN_SPRG_SCRATCH5 - mtspr SPRN_PID, r9 - mtcr r12 - mfspr r9, SPRN_SPRG_SCRATCH4 - mfspr r12, SPRN_SPRG_SCRATCH3 - mfspr r11, SPRN_SPRG_SCRATCH1 - mfspr r10, SPRN_SPRG_SCRATCH0 - b InstructionAccess - - EXCEPTION(0x1300, Trap_13, unknown_exception, EXC_XFER_STD) - EXCEPTION(0x1400, Trap_14, unknown_exception, EXC_XFER_STD) - EXCEPTION(0x1500, Trap_15, unknown_exception, EXC_XFER_STD) - EXCEPTION(0x1600, Trap_16, unknown_exception, EXC_XFER_STD) - EXCEPTION(0x1700, Trap_17, unknown_exception, EXC_XFER_STD) - EXCEPTION(0x1800, Trap_18, unknown_exception, EXC_XFER_STD) - EXCEPTION(0x1900, Trap_19, unknown_exception, EXC_XFER_STD) - EXCEPTION(0x1A00, Trap_1A, unknown_exception, EXC_XFER_STD) - EXCEPTION(0x1B00, Trap_1B, unknown_exception, EXC_XFER_STD) - EXCEPTION(0x1C00, Trap_1C, unknown_exception, EXC_XFER_STD) - EXCEPTION(0x1D00, Trap_1D, unknown_exception, EXC_XFER_STD) - EXCEPTION(0x1E00, Trap_1E, unknown_exception, EXC_XFER_STD) - EXCEPTION(0x1F00, Trap_1F, unknown_exception, EXC_XFER_STD) - -/* Check for a single step debug exception while in an exception - * handler before state has been saved. This is to catch the case - * where an instruction that we are trying to single step causes - * an exception (eg ITLB/DTLB miss) and thus the first instruction of - * the exception handler generates a single step debug exception. - * - * If we get a debug trap on the first instruction of an exception handler, - * we reset the MSR_DE in the _exception handler's_ MSR (the debug trap is - * a critical exception, so we are using SPRN_CSRR1 to manipulate the MSR). - * The exception handler was handling a non-critical interrupt, so it will - * save (and later restore) the MSR via SPRN_SRR1, which will still have - * the MSR_DE bit set. - */ - /* 0x2000 - Debug Exception */ - START_EXCEPTION(0x2000, DebugTrap) - CRITICAL_EXCEPTION_PROLOG - - /* - * If this is a single step or branch-taken exception in an - * exception entry sequence, it was probably meant to apply to - * the code where the exception occurred (since exception entry - * doesn't turn off DE automatically). We simulate the effect - * of turning off DE on entry to an exception handler by turning - * off DE in the SRR3 value and clearing the debug status. - */ - mfspr r10,SPRN_DBSR /* check single-step/branch taken */ - andis. r10,r10,DBSR_IC@h - beq+ 2f - - andi. r10,r9,MSR_IR|MSR_PR /* check supervisor + MMU off */ - beq 1f /* branch and fix it up */ - - mfspr r10,SPRN_SRR2 /* Faulting instruction address */ - cmplwi r10,0x2100 - bgt+ 2f /* address above exception vectors */ - - /* here it looks like we got an inappropriate debug exception. */ -1: rlwinm r9,r9,0,~MSR_DE /* clear DE in the SRR3 value */ - lis r10,DBSR_IC@h /* clear the IC event */ - mtspr SPRN_DBSR,r10 - /* restore state and get out */ - lwz r10,_CCR(r11) - lwz r0,GPR0(r11) - lwz r1,GPR1(r11) - mtcrf 0x80,r10 - mtspr SPRN_SRR2,r12 - mtspr SPRN_SRR3,r9 - lwz r9,GPR9(r11) - lwz r12,GPR12(r11) - lwz r10,crit_r10@l(0) - lwz r11,crit_r11@l(0) - rfci - b . - - /* continue normal handling for a critical exception... */ -2: mfspr r4,SPRN_DBSR - addi r3,r1,STACK_FRAME_OVERHEAD - EXC_XFER_TEMPLATE(DebugException, 0x2002, \ - (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \ - crit_transfer_to_handler, ret_from_crit_exc) - - /* Programmable Interval Timer (PIT) Exception. (from 0x1000) */ -Decrementer: - EXCEPTION_PROLOG - lis r0,TSR_PIS@h - mtspr SPRN_TSR,r0 /* Clear the PIT exception */ - addi r3,r1,STACK_FRAME_OVERHEAD - EXC_XFER_LITE(0x1000, timer_interrupt) - - /* Fixed Interval Timer (FIT) Exception. (from 0x1010) */ -FITException: - EXCEPTION_PROLOG - addi r3,r1,STACK_FRAME_OVERHEAD; - EXC_XFER_STD(0x1010, unknown_exception) - - /* Watchdog Timer (WDT) Exception. (from 0x1020) */ -WDTException: - CRITICAL_EXCEPTION_PROLOG; - addi r3,r1,STACK_FRAME_OVERHEAD; - EXC_XFER_TEMPLATE(WatchdogException, 0x1020+2, - (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), - crit_transfer_to_handler, ret_from_crit_exc) - -/* Other PowerPC processors, namely those derived from the 6xx-series - * have vectors from 0x2100 through 0x2F00 defined, but marked as reserved. - * However, for the 4xx-series processors these are neither defined nor - * reserved. - */ - - /* Damn, I came up one instruction too many to fit into the - * exception space :-). Both the instruction and data TLB - * miss get to this point to load the TLB. - * r10 - TLB_TAG value - * r11 - Linux PTE - * r9 - available to use - * PID - loaded with proper value when we get here - * Upon exit, we reload everything and RFI. - * Actually, it will fit now, but oh well.....a common place - * to load the TLB. - */ -tlb_4xx_index: - .long 0 -finish_tlb_load: - /* - * Clear out the software-only bits in the PTE to generate the - * TLB_DATA value. These are the bottom 2 bits of the RPM, the - * top 3 bits of the zone field, and M. - */ - li r9, 0x0ce2 - andc r11, r11, r9 - - /* load the next available TLB index. */ - lwz r9, tlb_4xx_index@l(0) - addi r9, r9, 1 - andi. r9, r9, PPC40X_TLB_SIZE - 1 - stw r9, tlb_4xx_index@l(0) - - tlbwe r11, r9, TLB_DATA /* Load TLB LO */ - tlbwe r10, r9, TLB_TAG /* Load TLB HI */ - - /* Done...restore registers and get out of here. - */ - mfspr r9, SPRN_SPRG_SCRATCH5 - mtspr SPRN_PID, r9 - mtcr r12 - mfspr r9, SPRN_SPRG_SCRATCH4 - mfspr r12, SPRN_SPRG_SCRATCH3 - mfspr r11, SPRN_SPRG_SCRATCH1 - mfspr r10, SPRN_SPRG_SCRATCH0 - rfi /* Should sync shadow TLBs */ - b . /* prevent prefetch past rfi */ - -/* This is where the main kernel code starts. - */ -start_here: - - /* ptr to current */ - lis r2,init_task@h - ori r2,r2,init_task@l - - /* ptr to phys current thread */ - tophys(r4,r2) - addi r4,r4,THREAD /* init task's THREAD */ - mtspr SPRN_SPRG_THREAD,r4 - - /* stack */ - lis r1,init_thread_union@ha - addi r1,r1,init_thread_union@l - li r0,0 - stwu r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1) - - bl early_init /* We have to do this with MMU on */ - -/* - * Decide what sort of machine this is and initialize the MMU. - */ -#ifdef CONFIG_KASAN - bl kasan_early_init -#endif - li r3,0 - mr r4,r31 - bl machine_init - bl MMU_init - -/* Go back to running unmapped so we can load up new values - * and change to using our exception vectors. - * On the 4xx, all we have to do is invalidate the TLB to clear - * the old 16M byte TLB mappings. - */ - lis r4,2f@h - ori r4,r4,2f@l - tophys(r4,r4) - lis r3,(MSR_KERNEL & ~(MSR_IR|MSR_DR))@h - ori r3,r3,(MSR_KERNEL & ~(MSR_IR|MSR_DR))@l - mtspr SPRN_SRR0,r4 - mtspr SPRN_SRR1,r3 - rfi - b . /* prevent prefetch past rfi */ - -/* Load up the kernel context */ -2: - sync /* Flush to memory before changing TLB */ - tlbia - isync /* Flush shadow TLBs */ - - /* set up the PTE pointers for the Abatron bdiGDB. - */ - lis r6, swapper_pg_dir@h - ori r6, r6, swapper_pg_dir@l - lis r5, abatron_pteptrs@h - ori r5, r5, abatron_pteptrs@l - stw r5, 0xf0(0) /* Must match your Abatron config file */ - tophys(r5,r5) - stw r6, 0(r5) - -/* Now turn on the MMU for real! */ - lis r4,MSR_KERNEL@h - ori r4,r4,MSR_KERNEL@l - lis r3,start_kernel@h - ori r3,r3,start_kernel@l - mtspr SPRN_SRR0,r3 - mtspr SPRN_SRR1,r4 - rfi /* enable MMU and jump to start_kernel */ - b . /* prevent prefetch past rfi */ - -/* Set up the initial MMU state so we can do the first level of - * kernel initialization. This maps the first 16 MBytes of memory 1:1 - * virtual to physical and more importantly sets the cache mode. - */ -initial_mmu: - tlbia /* Invalidate all TLB entries */ - isync - - /* We should still be executing code at physical address 0x0000xxxx - * at this point. However, start_here is at virtual address - * 0xC000xxxx. So, set up a TLB mapping to cover this once - * translation is enabled. - */ - - lis r3,KERNELBASE@h /* Load the kernel virtual address */ - ori r3,r3,KERNELBASE@l - tophys(r4,r3) /* Load the kernel physical address */ - - iccci r0,r3 /* Invalidate the i-cache before use */ - - /* Load the kernel PID. - */ - li r0,0 - mtspr SPRN_PID,r0 - sync - - /* Configure and load one entry into TLB slots 63 */ - clrrwi r4,r4,10 /* Mask off the real page number */ - ori r4,r4,(TLB_WR | TLB_EX) /* Set the write and execute bits */ - - clrrwi r3,r3,10 /* Mask off the effective page number */ - ori r3,r3,(TLB_VALID | TLB_PAGESZ(PAGESZ_16M)) - - li r0,63 /* TLB slot 63 */ - - tlbwe r4,r0,TLB_DATA /* Load the data portion of the entry */ - tlbwe r3,r0,TLB_TAG /* Load the tag portion of the entry */ - - isync - - /* Establish the exception vector base - */ - lis r4,KERNELBASE@h /* EVPR only uses the high 16-bits */ - tophys(r0,r4) /* Use the physical address */ - mtspr SPRN_EVPR,r0 - - blr - -_GLOBAL(abort) - mfspr r13,SPRN_DBCR0 - oris r13,r13,DBCR0_RST_SYSTEM@h - mtspr SPRN_DBCR0,r13 - -_GLOBAL(set_context) - -#ifdef CONFIG_BDI_SWITCH - /* Context switch the PTE pointer for the Abatron BDI2000. - * The PGDIR is the second parameter. - */ - lis r5, abatron_pteptrs@ha - stw r4, abatron_pteptrs@l + 0x4(r5) -#endif - sync - mtspr SPRN_PID,r3 - isync /* Need an isync to flush shadow */ - /* TLBs after changing PID */ - blr - -/* We put a few things here that have to be page-aligned. This stuff - * goes at the beginning of the data segment, which is page-aligned. - */ - .data - .align 12 - .globl sdata -sdata: - .globl empty_zero_page -empty_zero_page: - .space 4096 -EXPORT_SYMBOL(empty_zero_page) - .globl swapper_pg_dir -swapper_pg_dir: - .space PGD_TABLE_SIZE - -/* Room for two PTE pointers, usually the kernel and current user pointers - * to their respective root page table. - */ -abatron_pteptrs: - .space 8 diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 7d0f7682d01d..e69ba409dda1 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -760,7 +760,7 @@ void __init init_IRQ(void) ppc_md.init_IRQ(); } -#if defined(CONFIG_BOOKE) || defined(CONFIG_40x) +#ifdef CONFIG_BOOKE void *critirq_ctx[NR_CPUS] __read_mostly; void *dbgirq_ctx[NR_CPUS] __read_mostly; void *mcheckirq_ctx[NR_CPUS] __read_mostly; diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c index 409080208a6c..95a238696ce6 100644 --- a/arch/powerpc/kernel/kgdb.c +++ b/arch/powerpc/kernel/kgdb.c @@ -48,7 +48,7 @@ static struct hard_trap_info { 0x0800, 0x08 /* SIGFPE */ }, /* fp unavailable */ { 0x0900, 0x0e /* SIGALRM */ }, /* decrementer */ { 0x0c00, 0x14 /* SIGCHLD */ }, /* system call */ -#if defined(CONFIG_40x) || defined(CONFIG_BOOKE) +#ifdef CONFIG_BOOKE { 0x2002, 0x05 /* SIGTRAP */ }, /* debug */ #if defined(CONFIG_FSL_BOOKE) { 0x2010, 0x08 /* SIGFPE */ }, /* spe unavailable */ @@ -67,7 +67,7 @@ static struct hard_trap_info { 0x2010, 0x08 /* SIGFPE */ }, /* fp unavailable */ { 0x2020, 0x08 /* SIGFPE */ }, /* ap unavailable */ #endif -#else /* ! (defined(CONFIG_40x) || defined(CONFIG_BOOKE)) */ +#else /* !CONFIG_BOOKE */ { 0x0d00, 0x05 /* SIGTRAP */ }, /* single-step */ #if defined(CONFIG_PPC_8xx) { 0x1000, 0x04 /* SIGILL */ }, /* software emulation */ diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S index 717e658b90fd..a6d76af11cdb 100644 --- a/arch/powerpc/kernel/misc_32.S +++ b/arch/powerpc/kernel/misc_32.S @@ -215,46 +215,6 @@ _GLOBAL(low_choose_7447a_dfs) #endif /* CONFIG_CPU_FREQ_PMAC && CONFIG_PPC_BOOK3S_32 */ -#ifdef CONFIG_40x - -/* - * Do an IO access in real mode - */ -_GLOBAL(real_readb) - mfmsr r7 - rlwinm r0,r7,0,~MSR_DR - sync - mtmsr r0 - sync - isync - lbz r3,0(r3) - sync - mtmsr r7 - sync - isync - blr -_ASM_NOKPROBE_SYMBOL(real_readb) - - /* - * Do an IO access in real mode - */ -_GLOBAL(real_writeb) - mfmsr r7 - rlwinm r0,r7,0,~MSR_DR - sync - mtmsr r0 - sync - isync - stb r3,0(r4) - sync - mtmsr r7 - sync - isync - blr -_ASM_NOKPROBE_SYMBOL(real_writeb) - -#endif /* CONFIG_40x */ - /* * Copy a whole page. We use the dcbz instruction on the destination * to reduce memory traffic (it eliminates the unnecessary reads of diff --git a/arch/powerpc/kernel/setup.h b/arch/powerpc/kernel/setup.h index 2dd0d9cb5a20..f0687f34a5b0 100644 --- a/arch/powerpc/kernel/setup.h +++ b/arch/powerpc/kernel/setup.h @@ -29,7 +29,7 @@ void setup_tlb_core_data(void); static inline void setup_tlb_core_data(void) { }; #endif -#if defined(CONFIG_PPC_BOOK3E) || defined(CONFIG_BOOKE) || defined(CONFIG_40x) +#if defined(CONFIG_PPC_BOOK3E) || defined(CONFIG_BOOKE) void exc_lvl_early_init(void); #else static inline void exc_lvl_early_init(void) { }; diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index 8ba49a6bf515..cff64de781dc 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -175,7 +175,7 @@ void __init emergency_stack_init(void) } #endif -#if defined(CONFIG_BOOKE) || defined(CONFIG_40x) +#ifdef CONFIG_BOOKE void __init exc_lvl_early_init(void) { unsigned int i, hw_cpu; diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 92481463f9dc..8d15d66a00e8 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -737,7 +737,7 @@ static int __init get_freq(char *name, int cells, unsigned long *val) static void start_cpu_decrementer(void) { -#if defined(CONFIG_BOOKE) || defined(CONFIG_40x) +#ifdef CONFIG_BOOKE unsigned int tcr; /* Clear any pending timer interrupts */ diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 3ec7b443fe6b..44399b798490 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -2178,7 +2178,7 @@ void unrecoverable_exception(struct pt_regs *regs) } NOKPROBE_SYMBOL(unrecoverable_exception); -#if defined(CONFIG_BOOKE_WDT) || defined(CONFIG_40x) +#ifdef CONFIG_BOOKE_WDT /* * Default handler for a Watchdog exception, * spins until a reboot occurs diff --git a/arch/powerpc/kernel/udbg.c b/arch/powerpc/kernel/udbg.c index 01595e8cafe7..d7be60d86e6d 100644 --- a/arch/powerpc/kernel/udbg.c +++ b/arch/powerpc/kernel/udbg.c @@ -49,9 +49,6 @@ void __init udbg_early_init(void) #elif defined(CONFIG_PPC_EARLY_DEBUG_44x) /* PPC44x debug */ udbg_init_44x_as1(); -#elif defined(CONFIG_PPC_EARLY_DEBUG_40x) - /* PPC40x debug */ - udbg_init_40x_realmode(); #elif defined(CONFIG_PPC_EARLY_DEBUG_CPM) udbg_init_cpm(); #elif defined(CONFIG_PPC_EARLY_DEBUG_USBGECKO) diff --git a/arch/powerpc/kernel/udbg_16550.c b/arch/powerpc/kernel/udbg_16550.c index 9356b60d6030..748b7022713a 100644 --- a/arch/powerpc/kernel/udbg_16550.c +++ b/arch/powerpc/kernel/udbg_16550.c @@ -273,26 +273,3 @@ void __init udbg_init_44x_as1(void) } #endif /* CONFIG_PPC_EARLY_DEBUG_44x */ - -#ifdef CONFIG_PPC_EARLY_DEBUG_40x - -static u8 udbg_uart_in_40x(unsigned int reg) -{ - return real_readb((void __iomem *)CONFIG_PPC_EARLY_DEBUG_40x_PHYSADDR - + reg); -} - -static void udbg_uart_out_40x(unsigned int reg, u8 val) -{ - real_writeb(val, (void __iomem *)CONFIG_PPC_EARLY_DEBUG_40x_PHYSADDR - + reg); -} - -void __init udbg_init_40x_realmode(void) -{ - udbg_uart_in = udbg_uart_in_40x; - udbg_uart_out = udbg_uart_out_40x; - udbg_use_uart(); -} - -#endif /* CONFIG_PPC_EARLY_DEBUG_40x */ diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h index 0ad6d476d01d..4928863d035d 100644 --- a/arch/powerpc/mm/mmu_decl.h +++ b/arch/powerpc/mm/mmu_decl.h @@ -20,9 +20,9 @@ #include /* - * On 40x and 8xx, we directly inline tlbia and tlbivax + * On 8xx, we directly inline tlbia */ -#if defined(CONFIG_40x) || defined(CONFIG_PPC_8xx) +#ifdef CONFIG_PPC_8xx static inline void _tlbil_all(void) { asm volatile ("sync; tlbia; isync" : : : "memory"); @@ -35,7 +35,7 @@ static inline void _tlbil_pid(unsigned int pid) } #define _tlbil_pid_noind(pid) _tlbil_pid(pid) -#else /* CONFIG_40x || CONFIG_PPC_8xx */ +#else /* CONFIG_PPC_8xx */ extern void _tlbil_all(void); extern void _tlbil_pid(unsigned int pid); #ifdef CONFIG_PPC_BOOK3E @@ -43,7 +43,7 @@ extern void _tlbil_pid_noind(unsigned int pid); #else #define _tlbil_pid_noind(pid) _tlbil_pid(pid) #endif -#endif /* !(CONFIG_40x || CONFIG_PPC_8xx) */ +#endif /* !CONFIG_PPC_8xx */ /* * On 8xx, we directly inline tlbie, on others, it's extern diff --git a/arch/powerpc/mm/nohash/40x.c b/arch/powerpc/mm/nohash/40x.c deleted file mode 100644 index 95751c322f6c..000000000000 --- a/arch/powerpc/mm/nohash/40x.c +++ /dev/null @@ -1,152 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * This file contains the routines for initializing the MMU - * on the 4xx series of chips. - * -- paulus - * - * Derived from arch/ppc/mm/init.c: - * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) - * - * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au) - * and Cort Dougan (PReP) (cort@cs.nmt.edu) - * Copyright (C) 1996 Paul Mackerras - * - * Derived from "arch/i386/mm/init.c" - * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -extern int __map_without_ltlbs; -/* - * MMU_init_hw does the chip-specific initialization of the MMU hardware. - */ -void __init MMU_init_hw(void) -{ - /* - * The Zone Protection Register (ZPR) defines how protection will - * be applied to every page which is a member of a given zone. At - * present, we utilize only two of the 4xx's zones. - * The zone index bits (of ZSEL) in the PTE are used for software - * indicators, except the LSB. For user access, zone 1 is used, - * for kernel access, zone 0 is used. We set all but zone 1 - * to zero, allowing only kernel access as indicated in the PTE. - * For zone 1, we set a 01 binary (a value of 10 will not work) - * to allow user access as indicated in the PTE. This also allows - * kernel access as indicated in the PTE. - */ - - mtspr(SPRN_ZPR, 0x10000000); - - flush_instruction_cache(); - - /* - * Set up the real-mode cache parameters for the exception vector - * handlers (which are run in real-mode). - */ - - mtspr(SPRN_DCWR, 0x00000000); /* All caching is write-back */ - - /* - * Cache instruction and data space where the exception - * vectors and the kernel live in real-mode. - */ - - mtspr(SPRN_DCCR, 0xFFFF0000); /* 2GByte of data space at 0x0. */ - mtspr(SPRN_ICCR, 0xFFFF0000); /* 2GByte of instr. space at 0x0. */ -} - -#define LARGE_PAGE_SIZE_16M (1<<24) -#define LARGE_PAGE_SIZE_4M (1<<22) - -unsigned long __init mmu_mapin_ram(unsigned long base, unsigned long top) -{ - unsigned long v, s, mapped; - phys_addr_t p; - - v = KERNELBASE; - p = 0; - s = total_lowmem; - - if (__map_without_ltlbs) - return 0; - - while (s >= LARGE_PAGE_SIZE_16M) { - pmd_t *pmdp; - unsigned long val = p | _PMD_SIZE_16M | _PAGE_EXEC | _PAGE_RW; - - pmdp = pmd_off_k(v); - *pmdp++ = __pmd(val); - *pmdp++ = __pmd(val); - *pmdp++ = __pmd(val); - *pmdp++ = __pmd(val); - - v += LARGE_PAGE_SIZE_16M; - p += LARGE_PAGE_SIZE_16M; - s -= LARGE_PAGE_SIZE_16M; - } - - while (s >= LARGE_PAGE_SIZE_4M) { - pmd_t *pmdp; - unsigned long val = p | _PMD_SIZE_4M | _PAGE_EXEC | _PAGE_RW; - - pmdp = pmd_off_k(v); - *pmdp = __pmd(val); - - v += LARGE_PAGE_SIZE_4M; - p += LARGE_PAGE_SIZE_4M; - s -= LARGE_PAGE_SIZE_4M; - } - - mapped = total_lowmem - s; - - /* If the size of RAM is not an exact power of two, we may not - * have covered RAM in its entirety with 16 and 4 MiB - * pages. Consequently, restrict the top end of RAM currently - * allocable so that calls to the MEMBLOCK to allocate PTEs for "tail" - * coverage with normal-sized pages (or other reasons) do not - * attempt to allocate outside the allowed range. - */ - memblock_set_current_limit(mapped); - - return mapped; -} - -void setup_initial_memory_limit(phys_addr_t first_memblock_base, - phys_addr_t first_memblock_size) -{ - /* We don't currently support the first MEMBLOCK not mapping 0 - * physical on those processors - */ - BUG_ON(first_memblock_base != 0); - - /* 40x can only access 16MB at the moment (see head_40x.S) */ - memblock_set_current_limit(min_t(u64, first_memblock_size, 0x00800000)); -} diff --git a/arch/powerpc/mm/nohash/Makefile b/arch/powerpc/mm/nohash/Makefile index 0424f6ce5bd8..eaa6d8938d83 100644 --- a/arch/powerpc/mm/nohash/Makefile +++ b/arch/powerpc/mm/nohash/Makefile @@ -4,7 +4,6 @@ ccflags-$(CONFIG_PPC64) := $(NO_MINIMAL_TOC) obj-y += mmu_context.o tlb.o tlb_low.o obj-$(CONFIG_PPC_BOOK3E_64) += tlb_low_64e.o book3e_pgtable.o -obj-$(CONFIG_40x) += 40x.o obj-$(CONFIG_44x) += 44x.o obj-$(CONFIG_PPC_8xx) += 8xx.o obj-$(CONFIG_PPC_FSL_BOOK3E) += fsl_booke.o diff --git a/arch/powerpc/mm/nohash/tlb_low.S b/arch/powerpc/mm/nohash/tlb_low.S index 68797e072f55..08488cddb997 100644 --- a/arch/powerpc/mm/nohash/tlb_low.S +++ b/arch/powerpc/mm/nohash/tlb_low.S @@ -32,32 +32,7 @@ #include #include -#if defined(CONFIG_40x) - -/* - * 40x implementation needs only tlbil_va - */ -_GLOBAL(__tlbil_va) - /* We run the search with interrupts disabled because we have to change - * the PID and I don't want to preempt when that happens. - */ - mfmsr r5 - mfspr r6,SPRN_PID - wrteei 0 - mtspr SPRN_PID,r4 - tlbsx. r3, 0, r3 - mtspr SPRN_PID,r6 - wrtee r5 - bne 1f - sync - /* There are only 64 TLB entries, so r3 < 64, which means bit 25 is - * clear. Since 25 is the V bit in the TLB_TAG, loading this value - * will invalidate the TLB entry. */ - tlbwe r3, r3, TLB_TAG - isync -1: blr - -#elif defined(CONFIG_PPC_8xx) +#if defined(CONFIG_PPC_8xx) /* * Nothing to do for 8xx, everything is inline diff --git a/arch/powerpc/platforms/4xx/pci.c b/arch/powerpc/platforms/4xx/pci.c index c13d64c3b019..5f58859bb5c0 100644 --- a/arch/powerpc/platforms/4xx/pci.c +++ b/arch/powerpc/platforms/4xx/pci.c @@ -1265,102 +1265,6 @@ static struct ppc4xx_pciex_hwops ppc460sx_pcie_hwops __initdata = { #endif /* CONFIG_44x */ -#ifdef CONFIG_40x - -static int __init ppc405ex_pciex_core_init(struct device_node *np) -{ - /* Nothing to do, return 2 ports */ - return 2; -} - -static void ppc405ex_pcie_phy_reset(struct ppc4xx_pciex_port *port) -{ - /* Assert the PE0_PHY reset */ - mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, 0x01010000); - msleep(1); - - /* deassert the PE0_hotreset */ - if (port->endpoint) - mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, 0x01111000); - else - mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, 0x01101000); - - /* poll for phy !reset */ - /* XXX FIXME add timeout */ - while (!(mfdcri(SDR0, port->sdr_base + PESDRn_405EX_PHYSTA) & 0x00001000)) - ; - - /* deassert the PE0_gpl_utl_reset */ - mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, 0x00101000); -} - -static int __init ppc405ex_pciex_init_port_hw(struct ppc4xx_pciex_port *port) -{ - u32 val; - - if (port->endpoint) - val = PTYPE_LEGACY_ENDPOINT; - else - val = PTYPE_ROOT_PORT; - - mtdcri(SDR0, port->sdr_base + PESDRn_DLPSET, - 1 << 24 | val << 20 | LNKW_X1 << 12); - - mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET1, 0x00000000); - mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET2, 0x01010000); - mtdcri(SDR0, port->sdr_base + PESDRn_405EX_PHYSET1, 0x720F0000); - mtdcri(SDR0, port->sdr_base + PESDRn_405EX_PHYSET2, 0x70600003); - - /* - * Only reset the PHY when no link is currently established. - * This is for the Atheros PCIe board which has problems to establish - * the link (again) after this PHY reset. All other currently tested - * PCIe boards don't show this problem. - * This has to be re-tested and fixed in a later release! - */ - val = mfdcri(SDR0, port->sdr_base + PESDRn_LOOP); - if (!(val & 0x00001000)) - ppc405ex_pcie_phy_reset(port); - - dcr_write(port->dcrs, DCRO_PEGPL_CFG, 0x10000000); /* guarded on */ - - port->has_ibpre = 1; - - return ppc4xx_pciex_port_reset_sdr(port); -} - -static int ppc405ex_pciex_init_utl(struct ppc4xx_pciex_port *port) -{ - dcr_write(port->dcrs, DCRO_PEGPL_SPECIAL, 0x0); - - /* - * Set buffer allocations and then assert VRB and TXE. - */ - out_be32(port->utl_base + PEUTL_OUTTR, 0x02000000); - out_be32(port->utl_base + PEUTL_INTR, 0x02000000); - out_be32(port->utl_base + PEUTL_OPDBSZ, 0x04000000); - out_be32(port->utl_base + PEUTL_PBBSZ, 0x21000000); - out_be32(port->utl_base + PEUTL_IPHBSZ, 0x02000000); - out_be32(port->utl_base + PEUTL_IPDBSZ, 0x04000000); - out_be32(port->utl_base + PEUTL_RCIRQEN, 0x00f00000); - out_be32(port->utl_base + PEUTL_PCTL, 0x80800066); - - out_be32(port->utl_base + PEUTL_PBCTL, 0x08000000); - - return 0; -} - -static struct ppc4xx_pciex_hwops ppc405ex_pcie_hwops __initdata = -{ - .want_sdr = true, - .core_init = ppc405ex_pciex_core_init, - .port_init_hw = ppc405ex_pciex_init_port_hw, - .setup_utl = ppc405ex_pciex_init_utl, - .check_link = ppc4xx_pciex_check_link_sdr, -}; - -#endif /* CONFIG_40x */ - #ifdef CONFIG_476FPE static int __init ppc_476fpe_pciex_core_init(struct device_node *np) { @@ -1429,10 +1333,6 @@ static int __init ppc4xx_pciex_check_core_init(struct device_node *np) if (of_device_is_compatible(np, "ibm,plb-pciex-apm821xx")) ppc4xx_pciex_hwops = &apm821xx_pcie_hwops; #endif /* CONFIG_44x */ -#ifdef CONFIG_40x - if (of_device_is_compatible(np, "ibm,plb-pciex-405ex")) - ppc4xx_pciex_hwops = &ppc405ex_pcie_hwops; -#endif #ifdef CONFIG_476FPE if (of_device_is_compatible(np, "ibm,plb-pciex-476fpe") || of_device_is_compatible(np, "ibm,plb-pciex-476gtr")) diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype index 45ce09db8f46..150d0c704f6e 100644 --- a/arch/powerpc/platforms/Kconfig.cputype +++ b/arch/powerpc/platforms/Kconfig.cputype @@ -51,13 +51,6 @@ config PPC_8xx select HAVE_ARCH_VMAP_STACK select HUGETLBFS -config 40x - bool "AMCC 40x" - select PPC_DCR_NATIVE - select PPC_UDBG_16550 - select 4xx_SOC - select HAVE_PCI - config 44x bool "AMCC 44x, 46x or 47x" select PPC_DCR_NATIVE @@ -250,7 +243,7 @@ config FSL_EMB_PERF_EVENT_E500 config 4xx bool - depends on 40x || 44x + depends on 44x default y config BOOKE -- 2.25.0