linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Larry Finger <Larry.Finger@lwfinger.net>
To: MosesChristopher <moseschristopherb@gmail.com>,
	gregkh@linuxfoundation.org, florian.c.schilhabel@googlemail.com,
	insafonov@gmail.com, hdegoede@redhat.com
Cc: devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] staging: rtl8*: use help instead of ---help--- in Kconfig
Date: Sat, 20 Apr 2019 12:00:53 -0500	[thread overview]
Message-ID: <2b4f1a3d-b5c3-98e6-fd85-32205312e26a@lwfinger.net> (raw)
In-Reply-To: <20190420113731.26160-1-moseschristopherb@gmail.com>

On 4/20/19 6:37 AM, MosesChristopher wrote:
> From: Moses Christopher <moseschristopherb@gmail.com>
> 
>    - Resolve the following warning from the Kconfig,
>      "WARNING: prefer 'help' over '---help---' for new help texts"
> 
> Signed-off-by: Moses Christopher <moseschristopherb@gmail.com>

I have never seen this warning, but your Kconfig may be newer than mine. In any 
case, the changes are harmless.

Acked-by: Larry Finger <Larry.Finger@lwfinger.net>

> ---
>   drivers/staging/rtl8188eu/Kconfig | 4 ++--
>   drivers/staging/rtl8192e/Kconfig  | 8 ++++----
>   drivers/staging/rtl8712/Kconfig   | 4 ++--
>   drivers/staging/rtl8723bs/Kconfig | 2 +-
>   4 files changed, 9 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/staging/rtl8188eu/Kconfig b/drivers/staging/rtl8188eu/Kconfig
> index ff7832798a77..3f8c655856bf 100644
> --- a/drivers/staging/rtl8188eu/Kconfig
> +++ b/drivers/staging/rtl8188eu/Kconfig
> @@ -7,7 +7,7 @@ config R8188EU
>   	select LIB80211
>   	select LIB80211_CRYPT_WEP
>   	select LIB80211_CRYPT_CCMP
> -	---help---
> +	help
>   	This option adds the Realtek RTL8188EU USB device such as TP-Link TL-WN725N.
>   	If built as a module, it will be called r8188eu.
>   
> @@ -16,7 +16,7 @@ if R8188EU
>   config 88EU_AP_MODE
>   	bool "Realtek RTL8188EU AP mode"
>   	default y
> -	---help---
> +	help
>   	This option enables Access Point mode. Unless you know that your system
>   	will never be used as an AP, or the target system has limited memory,
>   	"Y" should be selected.
> diff --git a/drivers/staging/rtl8192e/Kconfig b/drivers/staging/rtl8192e/Kconfig
> index 4602a47cdb4a..aa571c12678f 100644
> --- a/drivers/staging/rtl8192e/Kconfig
> +++ b/drivers/staging/rtl8192e/Kconfig
> @@ -3,7 +3,7 @@ config RTLLIB
>   	depends on WLAN && m
>   	default n
>   	select LIB80211
> -	---help---
> +	help
>   	  If you have a wireless card that uses rtllib, say
>   	  Y. Currently the only card is the rtl8192e.
>   
> @@ -16,7 +16,7 @@ config RTLLIB_CRYPTO_CCMP
>   	depends on RTLLIB
>   	select CRYPTO_AES
>   	default y
> -	---help---
> +	help
>   	  CCMP crypto driver for rtllib.
>   
>   	  If you enabled RTLLIB, you want this.
> @@ -27,7 +27,7 @@ config RTLLIB_CRYPTO_TKIP
>   	select CRYPTO_ARC4
>   	select CRYPTO_MICHAEL_MIC
>   	default y
> -	---help---
> +	help
>   	  TKIP crypto driver for rtllib.
>   
>   	  If you enabled RTLLIB, you want this.
> @@ -37,7 +37,7 @@ config RTLLIB_CRYPTO_WEP
>   	select CRYPTO_ARC4
>   	depends on RTLLIB
>   	default y
> -	---help---
> +	help
>   	  TKIP crypto driver for rtllib.
>   
>   	  If you enabled RTLLIB, you want this.
> diff --git a/drivers/staging/rtl8712/Kconfig b/drivers/staging/rtl8712/Kconfig
> index f160eee52f09..b377d90742db 100644
> --- a/drivers/staging/rtl8712/Kconfig
> +++ b/drivers/staging/rtl8712/Kconfig
> @@ -4,14 +4,14 @@ config R8712U
>   	select WIRELESS_EXT
>   	select WEXT_PRIV
>   	select FW_LOADER
> -	---help---
> +	help
>   	This option adds the Realtek RTL8712 USB device such as the D-Link DWA-130.
>   	If built as a module, it will be called r8712u.
>   
>   config R8712_TX_AGGR
>   	bool "Realtek RTL8712U Transmit Aggregation code"
>   	depends on R8712U && BROKEN
> -	---help---
> +	help
>   	This option provides transmit aggregation for the Realtek RTL8712 USB device.
>   
>   
> diff --git a/drivers/staging/rtl8723bs/Kconfig b/drivers/staging/rtl8723bs/Kconfig
> index deae0427ba6c..41ad6ed24860 100644
> --- a/drivers/staging/rtl8723bs/Kconfig
> +++ b/drivers/staging/rtl8723bs/Kconfig
> @@ -4,7 +4,7 @@ config RTL8723BS
>   	depends on m
>   	select WIRELESS_EXT
>   	select WEXT_PRIV
> -	---help---
> +	help
>   	This option enables support for RTL8723BS SDIO drivers, such as
>   	the wifi found on the 1st gen Intel Compute Stick, the CHIP
>   	and many other Intel Atom and ARM based devices.
> 


      reply	other threads:[~2019-04-20 17:00 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-20 11:37 [PATCH] staging: rtl8*: use help instead of ---help--- in Kconfig MosesChristopher
2019-04-20 17:00 ` Larry Finger [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2b4f1a3d-b5c3-98e6-fd85-32205312e26a@lwfinger.net \
    --to=larry.finger@lwfinger.net \
    --cc=devel@driverdev.osuosl.org \
    --cc=florian.c.schilhabel@googlemail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=hdegoede@redhat.com \
    --cc=insafonov@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=moseschristopherb@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).