* [PATCH] arm64: dts: qcom: sdm660: Add initial IFC6560 board
@ 2021-08-24 15:10 Bjorn Andersson
2021-08-24 20:44 ` AngeloGioacchino Del Regno
2021-08-24 22:00 ` Alexey Minnekhanov
0 siblings, 2 replies; 3+ messages in thread
From: Bjorn Andersson @ 2021-08-24 15:10 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Rob Herring
Cc: linux-arm-msm, devicetree, linux-kernel,
angelogioacchino.delregno, Konrad Dybcio
The IFC6560 is a board from Inforce Computing, built around the SDA660
SoC. This patch describes core clocks, some regulators from the two
PMICs, debug uart, storage, bluetooth and audio DSP remoteproc.
The regulator settings are inherited from prior work by Konrad Dybcio
and AngeloGioacchino Del Regno.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/sdm660-ifc6560.dts | 279 ++++++++++++++++++++
2 files changed, 280 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sdm660-ifc6560.dts
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 70516508be56..88abcfeb4d38 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -73,6 +73,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-discovery.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-pioneer.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-voyager.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm636-sony-xperia-ganges-mermaid.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sdm660-ifc6560.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm660-xiaomi-lavender.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r1.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r2.dtb
diff --git a/arch/arm64/boot/dts/qcom/sdm660-ifc6560.dts b/arch/arm64/boot/dts/qcom/sdm660-ifc6560.dts
new file mode 100644
index 000000000000..2244529bc6bf
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm660-ifc6560.dts
@@ -0,0 +1,279 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Linaro Ltd.
+ * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org>
+ * Copyright (c) 2020, AngeloGioacchino Del Regno
+ * <angelogioacchino.delregno@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "sdm660.dtsi"
+#include "pm660.dtsi"
+#include "pm660l.dtsi"
+
+/ {
+ model = "Inforce 6560 Single Board Computer";
+ compatible = "inforce,ifc6560", "qcom,sdm660";
+
+ aliases {
+ serial0 = &blsp1_uart2;
+ serial1 = &blsp2_uart1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ };
+
+ v3p3_bck_bst: v3p3-bck-bst-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "v3p3_bck_bst";
+
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ vin-supply = <&vph_pwr>;
+ };
+
+ v1p2_ldo: v1p2-ldo-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "v1p2_ldo";
+
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+
+ vin-supply = <&vph_pwr>;
+ };
+
+ v5p0_boost: v5p0-boost-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "v5p0_boost";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ vin-supply = <&vph_pwr>;
+ };
+};
+
+&adsp_pil {
+ firmware-name = "qcom/inforce/ifc6560/adsp.mbn";
+};
+
+&blsp1_uart2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart_active>;
+};
+
+&blsp2_uart1 {
+ status = "okay";
+
+ bluetooth {
+ compatible = "qcom,wcn3990-bt";
+
+ vddio-supply = <&vreg_l13a_1p8>;
+ vddxo-supply = <&vreg_l9a_1p8>;
+ vddrf-supply = <&vreg_l6a_1p3>;
+ vddch0-supply = <&vreg_l19a_3p3>;
+ max-speed = <3200000>;
+ };
+};
+
+&rpm_requests {
+ pm660-regulators {
+ compatible = "qcom,rpm-pm660-regulators";
+
+ vdd_s1-supply = <&vph_pwr>;
+ vdd_s2-supply = <&vph_pwr>;
+ vdd_s3-supply = <&vph_pwr>;
+ vdd_s4-supply = <&vph_pwr>;
+ vdd_s5-supply = <&vph_pwr>;
+ vdd_s6-supply = <&vph_pwr>;
+
+ vdd_l1_l6_l7-supply = <&vreg_s5a_1p35>;
+ vdd_l2_l3-supply = <&vreg_s2b_1p05>;
+ vdd_l5-supply = <&vreg_s2b_1p05>;
+ vdd_l8_l9_l10_l11_l12_l13_l14-supply = <&vreg_s4a_2p04>;
+ vdd_l15_l16_l17_l18_l19-supply = <&vreg_bob>;
+
+ vreg_s4a_2p04: s4 {
+ regulator-min-microvolt = <2040000>;
+ regulator-max-microvolt = <2040000>;
+ regulator-enable-ramp-delay = <200>;
+ regulator-ramp-delay = <0>;
+ regulator-always-on;
+ };
+
+ vreg_s5a_1p35: s5 {
+ regulator-min-microvolt = <1224000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-enable-ramp-delay = <200>;
+ regulator-ramp-delay = <0>;
+ };
+
+ vreg_l6a_1p3: l6 {
+ regulator-min-microvolt = <1304000>;
+ regulator-max-microvolt = <1368000>;
+ regulator-allow-set-load;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ };
+
+ vreg_l8a_1p8: l8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ regulator-system-load = <325000>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l9a_1p8: l9 {
+ regulator-min-microvolt = <1804000>;
+ regulator-max-microvolt = <1896000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l13a_1p8: l13 {
+ /* This gives power to the LPDDR4: never turn it off! */
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1944000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vreg_l19a_3p3: l19 {
+ regulator-min-microvolt = <3312000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ regulator-allow-set-load;
+ };
+ };
+
+ pm660l-regulators {
+ compatible = "qcom,rpm-pm660l-regulators";
+
+ vdd_s1-supply = <&vph_pwr>;
+ vdd_s2-supply = <&vph_pwr>;
+ vdd_s3_s4-supply = <&vph_pwr>;
+ vdd_s5-supply = <&vph_pwr>;
+ vdd_s6-supply = <&vph_pwr>;
+
+ vdd_l1_l9_l10-supply = <&vreg_s2b_1p05>;
+ vdd_l2-supply = <&vreg_bob>;
+ vdd_l3_l5_l7_l8-supply = <&vreg_bob>;
+ vdd_l4_l6-supply = <&vreg_bob>;
+ vdd_bob-supply = <&vph_pwr>;
+
+ vreg_s2b_1p05: s2 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-enable-ramp-delay = <200>;
+ regulator-ramp-delay = <0>;
+ };
+
+ vreg_l2b_2p95: l2 {
+ /*
+ * This regulator supports 1.648 - 3.104V on this board
+ * but we set a max voltage of anything less than 2.7V
+ * to satisfy a condition in sdhci.c that will disable
+ * 3.3V SDHCI signaling, which happens to be not really
+ * supported on the Xperia Nile/Ganges platform.
+ */
+ regulator-min-microvolt = <1648000>;
+ regulator-max-microvolt = <2696000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l4b_29p5: l4 {
+ regulator-min-microvolt = <2944000>;
+ regulator-max-microvolt = <2952000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+
+ regulator-min-microamp = <200>;
+ regulator-max-microamp = <600000>;
+ regulator-system-load = <570000>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l5b_29p5: l5 {
+ /*
+ * Downstream specifies a range of 1721-3600mV,
+ * but the only assigned consumers are SDHCI2 VMMC
+ * and Coresight QPDI that both request pinned 2.95V.
+ * Tighten the range to 1.8-3.328 (closest to 3.3) to
+ * make the mmc driver happy.
+ */
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3328000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ regulator-allow-set-load;
+ regulator-system-load = <800000>;
+ };
+
+ vreg_l8b_3p3: l8 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ };
+
+ vreg_bob: bob {
+ regulator-min-microvolt = <3304000>;
+ regulator-max-microvolt = <3624000>;
+ regulator-enable-ramp-delay = <500>;
+ regulator-ramp-delay = <0>;
+ };
+ };
+};
+
+&sdhc_1 {
+ status = "okay";
+ supports-cqe;
+
+ mmc-ddr-1_8v;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+
+ vmmc-supply = <&vreg_l4b_29p5>;
+ vqmmc-supply = <&vreg_l8a_1p8>;
+};
+
+&sdhc_2 {
+ status = "okay";
+
+ vmmc-supply = <&vreg_l5b_29p5>;
+ vqmmc-supply = <&vreg_l2b_2p95>;
+};
+
+&tlmm {
+ gpio-reserved-ranges = <0 4>, <8 4>;
+
+ uart_active: uart-active-state {
+ pins = "gpio4", "gpio5";
+ function = "blsp_uart2";
+ drive-strength = <2>;
+ bias-disable;
+ };
+};
--
2.29.2
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] arm64: dts: qcom: sdm660: Add initial IFC6560 board
2021-08-24 15:10 [PATCH] arm64: dts: qcom: sdm660: Add initial IFC6560 board Bjorn Andersson
@ 2021-08-24 20:44 ` AngeloGioacchino Del Regno
2021-08-24 22:00 ` Alexey Minnekhanov
1 sibling, 0 replies; 3+ messages in thread
From: AngeloGioacchino Del Regno @ 2021-08-24 20:44 UTC (permalink / raw)
To: Bjorn Andersson, Andy Gross, Rob Herring
Cc: linux-arm-msm, devicetree, linux-kernel, Konrad Dybcio
Il 24/08/21 17:10, Bjorn Andersson ha scritto:
> The IFC6560 is a board from Inforce Computing, built around the SDA660
> SoC. This patch describes core clocks, some regulators from the two
> PMICs, debug uart, storage, bluetooth and audio DSP remoteproc.
>
> The regulator settings are inherited from prior work by Konrad Dybcio
> and AngeloGioacchino Del Regno.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Nice!!!
Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
> ---
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> arch/arm64/boot/dts/qcom/sdm660-ifc6560.dts | 279 ++++++++++++++++++++
> 2 files changed, 280 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/sdm660-ifc6560.dts
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 70516508be56..88abcfeb4d38 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -73,6 +73,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-discovery.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-pioneer.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-voyager.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sdm636-sony-xperia-ganges-mermaid.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += sdm660-ifc6560.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sdm660-xiaomi-lavender.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r1.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r2.dtb
> diff --git a/arch/arm64/boot/dts/qcom/sdm660-ifc6560.dts b/arch/arm64/boot/dts/qcom/sdm660-ifc6560.dts
> new file mode 100644
> index 000000000000..2244529bc6bf
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sdm660-ifc6560.dts
> @@ -0,0 +1,279 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2021, Linaro Ltd.
> + * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org>
> + * Copyright (c) 2020, AngeloGioacchino Del Regno
> + * <angelogioacchino.delregno@somainline.org>
> + */
> +
> +/dts-v1/;
> +
> +#include "sdm660.dtsi"
> +#include "pm660.dtsi"
> +#include "pm660l.dtsi"
> +
> +/ {
> + model = "Inforce 6560 Single Board Computer";
> + compatible = "inforce,ifc6560", "qcom,sdm660";
> +
> + aliases {
> + serial0 = &blsp1_uart2;
> + serial1 = &blsp2_uart1;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + reserved-memory {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> + };
> +
> + vph_pwr: vph-pwr-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vph_pwr";
> + };
> +
> + v3p3_bck_bst: v3p3-bck-bst-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "v3p3_bck_bst";
> +
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> +
> + vin-supply = <&vph_pwr>;
> + };
> +
> + v1p2_ldo: v1p2-ldo-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "v1p2_ldo";
> +
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> +
> + vin-supply = <&vph_pwr>;
> + };
> +
> + v5p0_boost: v5p0-boost-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "v5p0_boost";
> +
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> +
> + vin-supply = <&vph_pwr>;
> + };
> +};
> +
> +&adsp_pil {
> + firmware-name = "qcom/inforce/ifc6560/adsp.mbn";
> +};
> +
> +&blsp1_uart2 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart_active>;
> +};
> +
> +&blsp2_uart1 {
> + status = "okay";
> +
> + bluetooth {
> + compatible = "qcom,wcn3990-bt";
> +
> + vddio-supply = <&vreg_l13a_1p8>;
> + vddxo-supply = <&vreg_l9a_1p8>;
> + vddrf-supply = <&vreg_l6a_1p3>;
> + vddch0-supply = <&vreg_l19a_3p3>;
> + max-speed = <3200000>;
> + };
> +};
> +
> +&rpm_requests {
> + pm660-regulators {
> + compatible = "qcom,rpm-pm660-regulators";
> +
> + vdd_s1-supply = <&vph_pwr>;
> + vdd_s2-supply = <&vph_pwr>;
> + vdd_s3-supply = <&vph_pwr>;
> + vdd_s4-supply = <&vph_pwr>;
> + vdd_s5-supply = <&vph_pwr>;
> + vdd_s6-supply = <&vph_pwr>;
> +
> + vdd_l1_l6_l7-supply = <&vreg_s5a_1p35>;
> + vdd_l2_l3-supply = <&vreg_s2b_1p05>;
> + vdd_l5-supply = <&vreg_s2b_1p05>;
> + vdd_l8_l9_l10_l11_l12_l13_l14-supply = <&vreg_s4a_2p04>;
> + vdd_l15_l16_l17_l18_l19-supply = <&vreg_bob>;
> +
> + vreg_s4a_2p04: s4 {
> + regulator-min-microvolt = <2040000>;
> + regulator-max-microvolt = <2040000>;
> + regulator-enable-ramp-delay = <200>;
> + regulator-ramp-delay = <0>;
> + regulator-always-on;
> + };
> +
> + vreg_s5a_1p35: s5 {
> + regulator-min-microvolt = <1224000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-enable-ramp-delay = <200>;
> + regulator-ramp-delay = <0>;
> + };
> +
> + vreg_l6a_1p3: l6 {
> + regulator-min-microvolt = <1304000>;
> + regulator-max-microvolt = <1368000>;
> + regulator-allow-set-load;
> + regulator-enable-ramp-delay = <250>;
> + regulator-ramp-delay = <0>;
> + };
> +
> + vreg_l8a_1p8: l8 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-enable-ramp-delay = <250>;
> + regulator-ramp-delay = <0>;
> + regulator-system-load = <325000>;
> + regulator-allow-set-load;
> + };
> +
> + vreg_l9a_1p8: l9 {
> + regulator-min-microvolt = <1804000>;
> + regulator-max-microvolt = <1896000>;
> + regulator-enable-ramp-delay = <250>;
> + regulator-ramp-delay = <0>;
> + regulator-allow-set-load;
> + };
> +
> + vreg_l13a_1p8: l13 {
> + /* This gives power to the LPDDR4: never turn it off! */
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1944000>;
> + regulator-enable-ramp-delay = <250>;
> + regulator-ramp-delay = <0>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + vreg_l19a_3p3: l19 {
> + regulator-min-microvolt = <3312000>;
> + regulator-max-microvolt = <3400000>;
> + regulator-enable-ramp-delay = <250>;
> + regulator-ramp-delay = <0>;
> + regulator-allow-set-load;
> + };
> + };
> +
> + pm660l-regulators {
> + compatible = "qcom,rpm-pm660l-regulators";
> +
> + vdd_s1-supply = <&vph_pwr>;
> + vdd_s2-supply = <&vph_pwr>;
> + vdd_s3_s4-supply = <&vph_pwr>;
> + vdd_s5-supply = <&vph_pwr>;
> + vdd_s6-supply = <&vph_pwr>;
> +
> + vdd_l1_l9_l10-supply = <&vreg_s2b_1p05>;
> + vdd_l2-supply = <&vreg_bob>;
> + vdd_l3_l5_l7_l8-supply = <&vreg_bob>;
> + vdd_l4_l6-supply = <&vreg_bob>;
> + vdd_bob-supply = <&vph_pwr>;
> +
> + vreg_s2b_1p05: s2 {
> + regulator-min-microvolt = <1050000>;
> + regulator-max-microvolt = <1050000>;
> + regulator-enable-ramp-delay = <200>;
> + regulator-ramp-delay = <0>;
> + };
> +
> + vreg_l2b_2p95: l2 {
> + /*
> + * This regulator supports 1.648 - 3.104V on this board
> + * but we set a max voltage of anything less than 2.7V
> + * to satisfy a condition in sdhci.c that will disable
> + * 3.3V SDHCI signaling, which happens to be not really
> + * supported on the Xperia Nile/Ganges platform.
> + */
> + regulator-min-microvolt = <1648000>;
> + regulator-max-microvolt = <2696000>;
> + regulator-enable-ramp-delay = <250>;
> + regulator-ramp-delay = <0>;
> + regulator-allow-set-load;
> + };
> +
> + vreg_l4b_29p5: l4 {
> + regulator-min-microvolt = <2944000>;
> + regulator-max-microvolt = <2952000>;
> + regulator-enable-ramp-delay = <250>;
> + regulator-ramp-delay = <0>;
> +
> + regulator-min-microamp = <200>;
> + regulator-max-microamp = <600000>;
> + regulator-system-load = <570000>;
> + regulator-allow-set-load;
> + };
> +
> + vreg_l5b_29p5: l5 {
> + /*
> + * Downstream specifies a range of 1721-3600mV,
> + * but the only assigned consumers are SDHCI2 VMMC
> + * and Coresight QPDI that both request pinned 2.95V.
> + * Tighten the range to 1.8-3.328 (closest to 3.3) to
> + * make the mmc driver happy.
> + */
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3328000>;
> + regulator-enable-ramp-delay = <250>;
> + regulator-ramp-delay = <0>;
> + regulator-allow-set-load;
> + regulator-system-load = <800000>;
> + };
> +
> + vreg_l8b_3p3: l8 {
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <3400000>;
> + regulator-enable-ramp-delay = <250>;
> + regulator-ramp-delay = <0>;
> + };
> +
> + vreg_bob: bob {
> + regulator-min-microvolt = <3304000>;
> + regulator-max-microvolt = <3624000>;
> + regulator-enable-ramp-delay = <500>;
> + regulator-ramp-delay = <0>;
> + };
> + };
> +};
> +
> +&sdhc_1 {
> + status = "okay";
> + supports-cqe;
> +
> + mmc-ddr-1_8v;
> + mmc-hs400-1_8v;
> + mmc-hs400-enhanced-strobe;
> +
> + vmmc-supply = <&vreg_l4b_29p5>;
> + vqmmc-supply = <&vreg_l8a_1p8>;
> +};
> +
> +&sdhc_2 {
> + status = "okay";
> +
> + vmmc-supply = <&vreg_l5b_29p5>;
> + vqmmc-supply = <&vreg_l2b_2p95>;
> +};
> +
> +&tlmm {
> + gpio-reserved-ranges = <0 4>, <8 4>;
> +
> + uart_active: uart-active-state {
> + pins = "gpio4", "gpio5";
> + function = "blsp_uart2";
> + drive-strength = <2>;
> + bias-disable;
> + };
> +};
>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] arm64: dts: qcom: sdm660: Add initial IFC6560 board
2021-08-24 15:10 [PATCH] arm64: dts: qcom: sdm660: Add initial IFC6560 board Bjorn Andersson
2021-08-24 20:44 ` AngeloGioacchino Del Regno
@ 2021-08-24 22:00 ` Alexey Minnekhanov
1 sibling, 0 replies; 3+ messages in thread
From: Alexey Minnekhanov @ 2021-08-24 22:00 UTC (permalink / raw)
To: Bjorn Andersson
Cc: linux-arm-msm, linux-kernel, angelogioacchino.delregno, Konrad Dybcio
24.08.2021 18:10, Bjorn Andersson wrote:
> diff --git a/arch/arm64/boot/dts/qcom/sdm660-ifc6560.dts b/arch/arm64/boot/dts/qcom/sdm660-ifc6560.dts
> new file mode 100644
> index 000000000000..2244529bc6bf
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sdm660-ifc6560.dts
...
> +
> +&rpm_requests {
...
> + pm660l-regulators
> + vreg_l2b_2p95: l2 {
...
> + vreg_l4b_29p5: l4 {
Maybe call it 2p95 (and not 29p5) like the one above, for consistency?
> +
> + vreg_l5b_29p5: l5 {
Maybe call it 2p95 too?
--
Regards
Alexey Minnekhanov
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2021-08-24 22:00 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-08-24 15:10 [PATCH] arm64: dts: qcom: sdm660: Add initial IFC6560 board Bjorn Andersson
2021-08-24 20:44 ` AngeloGioacchino Del Regno
2021-08-24 22:00 ` Alexey Minnekhanov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).