linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dmitry Osipenko <digetx@gmail.com>
To: Tony Lindgren <tony@atomide.com>
Cc: Maciej Purski <m.purski@samsung.com>,
	Mark Brown <broonie@kernel.org>,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, linux-omap@vger.kernel.org,
	Carlos Hernandez <ceh@ti.com>,
	Marek Szyprowski <m.szyprowski@samsung.com>
Subject: Re: [PATCH] regulator: core: Pass max_uV value to regulator_set_voltage_rdev
Date: Sat, 29 Sep 2018 01:26:28 +0300	[thread overview]
Message-ID: <2c0132ff-ea0f-f19e-ebfb-a0d077565d2c@gmail.com> (raw)
In-Reply-To: <20180928202251.GM5662@atomide.com>

On 9/28/18 11:22 PM, Tony Lindgren wrote:
> * Dmitry Osipenko <digetx@gmail.com> [180928 20:13]:
>> Tony, could you please give a try to the patch below?
>>
>> Do the following:
>>
>> 1) git cherry-pick 696861761a58d8c93605b5663824929fb6540f16
>> 2) git cherry-pick 456e7cdf3b1a14e2606b8b687385ab2e3f23a49a
>> 3) Apply this patch:
> 
> Seems to be getting closer, system boots up and starts
> init, but then I start getting tons of this on beagle-x15:

Tony, could you please try this one? Fixed couple more bugs, should be good now.



From 9c7382b1a28692576cbe00f57fdea0d25b27cc4c Mon Sep 17 00:00:00 2001
From: Dmitry Osipenko <digetx@gmail.com>
Date: Fri, 28 Sep 2018 21:49:20 +0300
Subject: [PATCH] Fixup regulator_balance_voltage() v2

---
 drivers/regulator/core.c | 83 ++++++++++++++++++++++++----------------
 1 file changed, 50 insertions(+), 33 deletions(-)

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 282511508698..2f3b1cf19bd5 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -105,7 +105,7 @@ static int _notifier_call_chain(struct regulator_dev *rdev,
 				  unsigned long event, void *data);
 static int _regulator_do_set_voltage(struct regulator_dev *rdev,
 				     int min_uV, int max_uV);
-static int regulator_balance_voltage(struct regulator_dev *rdev,
+static int regulator_balance_voltage(struct regulator *regulator,
 				     suspend_state_t state);
 static int regulator_set_voltage_rdev(struct regulator_dev *rdev,
 				      int min_uV, int max_uV,
@@ -2330,7 +2330,7 @@ int regulator_enable(struct regulator *regulator)
 	ret = _regulator_enable(rdev);
 	/* balance only if there are regulators coupled */
 	if (rdev->coupling_desc.n_coupled > 1)
-		regulator_balance_voltage(rdev, PM_SUSPEND_ON);
+		regulator_balance_voltage(regulator, PM_SUSPEND_ON);
 	regulator_unlock_dependent(rdev);
 
 	if (ret != 0 && rdev->supply)
@@ -2440,7 +2440,7 @@ int regulator_disable(struct regulator *regulator)
 	regulator_lock_dependent(rdev);
 	ret = _regulator_disable(rdev);
 	if (rdev->coupling_desc.n_coupled > 1)
-		regulator_balance_voltage(rdev, PM_SUSPEND_ON);
+		regulator_balance_voltage(regulator, PM_SUSPEND_ON);
 	regulator_unlock_dependent(rdev);
 
 	if (ret == 0 && rdev->supply)
@@ -2494,7 +2494,7 @@ int regulator_force_disable(struct regulator *regulator)
 	regulator->uA_load = 0;
 	ret = _regulator_force_disable(regulator->rdev);
 	if (rdev->coupling_desc.n_coupled > 1)
-		regulator_balance_voltage(rdev, PM_SUSPEND_ON);
+		regulator_balance_voltage(regulator, PM_SUSPEND_ON);
 	regulator_unlock_dependent(rdev);
 
 	if (rdev->supply)
@@ -3099,12 +3099,8 @@ static int regulator_set_voltage_unlocked(struct regulator *regulator,
 	voltage->min_uV = min_uV;
 	voltage->max_uV = max_uV;
 
-	ret = regulator_check_consumers(rdev, &min_uV, &max_uV, state);
-	if (ret < 0)
-		goto out2;
-
 	/* for not coupled regulators this will just set the voltage */
-	ret = regulator_balance_voltage(rdev, state);
+	ret = regulator_balance_voltage(regulator, state);
 	if (ret < 0)
 		goto out2;
 
@@ -3187,7 +3183,10 @@ static int regulator_set_voltage_rdev(struct regulator_dev *rdev, int min_uV,
 	return ret;
 }
 
-static int regulator_get_optimal_voltage(struct regulator_dev *rdev)
+static int regulator_get_optimal_voltage(struct regulator *regulator,
+					 struct regulator_dev *rdev,
+					 int *min_uV, int *max_uV,
+					 suspend_state_t state)
 {
 	struct coupling_desc *c_desc = &rdev->coupling_desc;
 	struct regulator_dev **c_rdevs = c_desc->coupled_rdevs;
@@ -3198,20 +3197,29 @@ static int regulator_get_optimal_voltage(struct regulator_dev *rdev)
 	int i, ret;
 
 	/* If consumers don't provide any demands, set voltage to min_uV */
-	desired_min_uV = rdev->constraints->min_uV;
-	desired_max_uV = rdev->constraints->max_uV;
-	ret = regulator_check_consumers(rdev,
-					&desired_min_uV,
-					&desired_max_uV, PM_SUSPEND_ON);
-	if (ret < 0)
-		goto out;
+	if (regulator->rdev == rdev) {
+		desired_min_uV = regulator->voltage[state].min_uV;
+		desired_max_uV = regulator->voltage[state].max_uV;
+
+		ret = regulator_check_consumers(rdev,
+						&desired_min_uV,
+						&desired_max_uV,
+						state);
+		if (ret < 0)
+			goto out;
+	} else {
+		desired_min_uV = rdev->constraints->min_uV;
+		desired_max_uV = rdev->constraints->max_uV;
+	}
 
 	/*
 	 * If there are no coupled regulators, simply set the voltage demanded
 	 * by consumers.
 	 */
-	if (n_coupled == 1) {
-		ret = desired_min_uV;
+	if (n_coupled == 1 || state != PM_SUSPEND_ON) {
+		*min_uV = desired_min_uV;
+		*max_uV = desired_max_uV;
+		ret = 1;
 		goto out;
 	}
 
@@ -3285,20 +3293,24 @@ static int regulator_get_optimal_voltage(struct regulator_dev *rdev)
 		ret = -EINVAL;
 		goto out;
 	}
-	ret = possible_uV;
+	ret = (possible_uV == desired_min_uV);
 
+	*min_uV = possible_uV;
+	*max_uV = desired_max_uV;
 out:
 	return ret;
 }
 
-static int regulator_balance_voltage(struct regulator_dev *rdev,
+static int regulator_balance_voltage(struct regulator *regulator,
 				     suspend_state_t state)
 {
+	struct regulator_dev *rdev = regulator->rdev;
 	struct regulator_dev **c_rdevs;
 	struct regulator_dev *best_rdev;
 	struct coupling_desc *c_desc = &rdev->coupling_desc;
 	int n_coupled;
-	int i, best_delta, best_uV, ret = 1;
+	int i, best_delta, best_min_uV, best_max_uV, ret = 1;
+	bool last = false;
 
 	c_rdevs = c_desc->coupled_rdevs;
 	n_coupled = c_desc->n_coupled;
@@ -3314,9 +3326,10 @@ static int regulator_balance_voltage(struct regulator_dev *rdev,
 	 * Find the best possible voltage change on each loop. Leave the loop
 	 * if there isn't any possible change.
 	 */
-	while (1) {
+	while (!last) {
 		best_delta = 0;
-		best_uV = 0;
+		best_min_uV = 0;
+		best_max_uV = 0;
 		best_rdev = NULL;
 
 		/*
@@ -3330,24 +3343,28 @@ static int regulator_balance_voltage(struct regulator_dev *rdev,
 			 * max_spread constraint in order to balance
 			 * the coupled voltages.
 			 */
-			int optimal_uV, current_uV;
+			int optimal_uV, optimal_max_uV, current_uV;
 
-			optimal_uV = regulator_get_optimal_voltage(c_rdevs[i]);
-			if (optimal_uV < 0) {
-				ret = optimal_uV;
+			ret = regulator_get_optimal_voltage(regulator,
+							    c_rdevs[i],
+							    &optimal_uV,
+							    &optimal_max_uV,
+							    state);
+			if (ret < 0)
 				goto out;
-			}
 
 			current_uV = _regulator_get_voltage(c_rdevs[i]);
 			if (current_uV < 0) {
-				ret = optimal_uV;
+				ret = current_uV;
 				goto out;
 			}
 
 			if (abs(best_delta) < abs(optimal_uV - current_uV)) {
 				best_delta = optimal_uV - current_uV;
 				best_rdev = c_rdevs[i];
-				best_uV = optimal_uV;
+				best_min_uV = optimal_uV;
+				best_max_uV = optimal_max_uV;
+				last = (best_rdev == rdev && ret > 0);
 			}
 		}
 
@@ -3357,8 +3374,8 @@ static int regulator_balance_voltage(struct regulator_dev *rdev,
 			goto out;
 		}
 
-		ret = regulator_set_voltage_rdev(best_rdev, best_uV,
-						 best_uV, state);
+		ret = regulator_set_voltage_rdev(best_rdev, best_min_uV,
+						 best_max_uV, state);
 
 		if (ret < 0)
 			goto out;
-- 
2.19.0



  parent reply	other threads:[~2018-09-28 22:26 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-29 22:15 Regression in Linux next again Tony Lindgren
2018-05-30  9:13 ` Mark Brown
2018-05-30 14:03   ` Maciej Purski
2018-05-30 14:33     ` Mark Brown
2018-05-30 14:45       ` Tony Lindgren
     [not found]         ` <CGME20180604135952eucas1p292f7bcec405e6a1a6261031df36cad32@eucas1p2.samsung.com>
2018-06-04 13:59           ` Maciej Purski
     [not found]             ` <CGME20180604135952eucas1p2d76b6aa5d8fc9912113d519b48f7e99a@eucas1p2.samsung.com>
2018-06-04 13:59               ` [PATCH 1/7] regulator: core: Add debug messages Maciej Purski
     [not found]             ` <CGME20180604135952eucas1p2e3fdb68bf31e32b7c9557051671885a9@eucas1p2.samsung.com>
2018-06-04 13:59               ` [PATCH 2/7] regulator: core: Add regulator_set_voltage_rdev() Maciej Purski
     [not found]             ` <CGME20180604135953eucas1p2f2c9dd9581cd114d323c3d64afe5c308@eucas1p2.samsung.com>
2018-06-04 13:59               ` [PATCH 3/7] regulator: core: Use re-entrant locks Maciej Purski
     [not found]             ` <CGME20180604135953eucas1p2ec281df0793bc73e79f3000837abcb04@eucas1p2.samsung.com>
2018-06-04 13:59               ` [PATCH 4/7] regulator: core: Implement voltage balancing algorithm Maciej Purski
     [not found]             ` <CGME20180604135954eucas1p2156fed3300b5514a4efa2baf9e7b9bc5@eucas1p2.samsung.com>
2018-06-04 13:59               ` [PATCH 5/7] regulator: core: Lock dependent regulators Maciej Purski
2018-06-04 14:20                 ` Lucas Stach
2018-06-18 12:37                   ` Maciej Purski
     [not found]             ` <CGME20180604135954eucas1p2eeb77ada3ca97fecc6caec20d7e8397a@eucas1p2.samsung.com>
2018-06-04 13:59               ` [PATCH 6/7] regulator: core: Lock dependent regulators on regulator_enable() Maciej Purski
     [not found]             ` <CGME20180604135954eucas1p2bebd1c4970401bb957da228056f9a662@eucas1p2.samsung.com>
2018-06-04 13:59               ` [PATCH 7/7] regulator: core: Enable voltage balancing Maciej Purski
2018-06-04 23:13                 ` kbuild test robot
2018-06-04 23:54                 ` kbuild test robot
2018-06-05  4:45             ` Regression in Linux next again Tony Lindgren
     [not found]               ` <CGME20180613103622eucas1p1778ba2c2e5dd85ccb4c488bd0a38386d@eucas1p1.samsung.com>
2018-06-13 10:33                 ` [PATCH v2] regulator: core: Enable voltage balancing Maciej Purski
2018-06-15 11:29                   ` Tony Lindgren
2018-06-18 13:17                     ` Maciej Purski
     [not found]                     ` <CGME20180618140856eucas1p281619f9bf003655a3c2eac356216ab25@eucas1p2.samsung.com>
2018-06-18 14:08                       ` [PATCH] regulator: core: Pass max_uV value to regulator_set_voltage_rdev Maciej Purski
2018-07-02  8:05                         ` Tony Lindgren
2018-09-28 20:09                           ` Dmitry Osipenko
2018-09-28 20:09                             ` Dmitry Osipenko
2018-09-28 20:22                             ` Tony Lindgren
2018-09-28 20:36                               ` Dmitry Osipenko
2018-09-28 22:26                               ` Dmitry Osipenko [this message]
2018-09-28 22:41                                 ` Tony Lindgren
2018-09-28 23:17                                   ` Dmitry Osipenko
2018-09-28 23:51                                     ` Dmitry Osipenko
2018-09-29  0:27                                       ` Tony Lindgren
2018-09-29  0:44                                         ` Dmitry Osipenko
2018-10-01  7:25                                           ` Maciej Purski
2018-10-01 13:34                                             ` Dmitry Osipenko
2018-05-30 14:53       ` Regression in Linux next again Naresh Kamboju
2018-05-31  5:44         ` Naresh Kamboju

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2c0132ff-ea0f-f19e-ebfb-a0d077565d2c@gmail.com \
    --to=digetx@gmail.com \
    --cc=broonie@kernel.org \
    --cc=ceh@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=m.purski@samsung.com \
    --cc=m.szyprowski@samsung.com \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).