Re: [PATCH v7 11/24] ASoC: qdsp6: q6afe: Add support to MI2S ports

From: Banajit Goswami <bgoswami@codeaurora.org>
To: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
	andy.gross@linaro.org, broonie@kernel.org,
	linux-arm-msm@vger.kernel.org, alsa-devel@alsa-project.org,
	robh+dt@kernel.org
Cc: gregkh@linuxfoundation.org, david.brown@linaro.org,
	mark.rutland@arm.com, lgirdwood@gmail.com, plai@codeaurora.org,
	tiwai@suse.com, perex@perex.cz, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, rohkumar@qti.qualcomm.com,
	spatakok@qti.qualcomm.com
Subject: Re: [PATCH v7 11/24] ASoC: qdsp6: q6afe: Add support to MI2S ports
Date: Tue, 8 May 2018 20:21:21 -0700	[thread overview]
Message-ID: <2d1e7dfd-b65a-4297-f98b-15c2dd54c61a@codeaurora.org> (raw)
In-Reply-To: <20180501120820.11016-12-srinivas.kandagatla@linaro.org>


On 5/1/2018 5:08 AM, Srinivas Kandagatla wrote:
> This patch adds support to 4 MI2S ports on LPASS.
>
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
> ---
>   sound/soc/qcom/qdsp6/q6afe.c | 224 +++++++++++++++++++++++++++++++++++++++++++
>   sound/soc/qcom/qdsp6/q6afe.h |  13 +++
>   2 files changed, 237 insertions(+)
>
> diff --git a/sound/soc/qcom/qdsp6/q6afe.c b/sound/soc/qcom/qdsp6/q6afe.c
> index be55b3ab045f..ceb18aaa5af4 100644
> --- a/sound/soc/qcom/qdsp6/q6afe.c
> +++ b/sound/soc/qcom/qdsp6/q6afe.c
> @@ -14,6 +14,10 @@
>   #include <linux/spinlock.h>
>   #include <linux/delay.h>
>   #include <linux/soc/qcom/apr.h>
> +#include <sound/soc.h>
> +#include <sound/soc-dai.h>
> +#include <sound/pcm.h>
<snip>

>   union afe_port_config {
>   	struct afe_param_id_hdmi_multi_chan_audio_cfg hdmi_multi_ch;
>   	struct afe_param_id_slimbus_cfg           slim_cfg;
> +	struct afe_param_id_i2s_cfg	i2s_cfg;
>   } __packed;
>   
>   struct q6afe_port {
> @@ -210,6 +264,22 @@ static struct afe_port_map port_maps[AFE_PORT_MAX] = {
>   				SLIMBUS_4_RX, 1, 1},
>   	[SLIMBUS_5_RX] = { AFE_PORT_ID_SLIMBUS_MULTI_CHAN_5_RX,
>   				SLIMBUS_5_RX, 1, 1},
> +	[QUATERNARY_MI2S_RX] = { AFE_PORT_ID_QUATERNARY_MI2S_RX,
> +				QUATERNARY_MI2S_RX, 1, 1},
> +	[QUATERNARY_MI2S_TX] = { AFE_PORT_ID_QUATERNARY_MI2S_TX,
> +				QUATERNARY_MI2S_TX, 0, 1},
> +	[SECONDARY_MI2S_RX] = { AFE_PORT_ID_SECONDARY_MI2S_RX,
> +				SECONDARY_MI2S_RX, 1, 1},
> +	[SECONDARY_MI2S_TX] = { AFE_PORT_ID_SECONDARY_MI2S_TX,
> +				SECONDARY_MI2S_TX, 0, 1},
> +	[TERTIARY_MI2S_RX] = { AFE_PORT_ID_TERTIARY_MI2S_RX,
> +				TERTIARY_MI2S_RX, 1, 1},
> +	[TERTIARY_MI2S_TX] = { AFE_PORT_ID_TERTIARY_MI2S_TX,
> +				TERTIARY_MI2S_TX, 0, 1},
> +	[PRIMARY_MI2S_RX] = { AFE_PORT_ID_PRIMARY_MI2S_RX,
> +				PRIMARY_MI2S_RX, 1, 1},
> +	[PRIMARY_MI2S_TX] = { AFE_PORT_ID_PRIMARY_MI2S_TX,
> +				PRIMARY_MI2S_RX, 0, 1},
Can these be added after SLIMBUS_6_RX?
Also, for better arrangement, please add the port_maps from 
PRIMARY_MI2S_RX to QUATERNARY_MI2S_TX in the same sequence of definition 
of AFE ports.
Otherwise LGTM.
Once fixed the above comment add-
Acked-by: Banajit Goswami <bgoswami@codeaurora.org>

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project