On 1/18/2021 9:34 PM, Rayagonda Kokatanur wrote: > From: Bharat Gooty > > Add a non-empty dma-ranges so that dma address translation > happens. > > Fixes: 2013a4b684b6 ("arm64: dts: broadcom: clear the warnings caused by empty dma-ranges") > > Signed-off-by: Bharat Gooty > Signed-off-by: Rayagonda Kokatanur > --- > arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi | 7 ++++++- > 1 file changed, 6 insertions(+), 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi > index aef8f2b00778..5401a646c840 100644 > --- a/arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi > +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi > @@ -4,11 +4,16 @@ > */ > usb { > compatible = "simple-bus"; > - dma-ranges; > #address-cells = <2>; > #size-cells = <2>; > ranges = <0x0 0x0 0x0 0x68500000 0x0 0x00400000>; > > + /* > + * Internally, USB bus to the interconnect can only address up > + * to 40-bit > + */ > + dma-ranges = <0 0 0 0 0x100 0x0>; > + Should have had my signed-off since during our internal review, I added the above comment to explain why we set it to 40-bit here despite the USB controller itself is capable of addressing 64-bit as Arnd pointed out. Well, the following ack should do it too, thanks. Acked-by: Ray Jui > usbphy0: usb-phy@0 { > compatible = "brcm,sr-usb-combo-phy"; > reg = <0x0 0x00000000 0x0 0x100>; >