linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Steven Price <steven.price@arm.com>
To: "Clément Péron" <peron.clem@gmail.com>,
	"Rob Herring" <robh@kernel.org>,
	"Tomeu Vizoso" <tomeu.vizoso@collabora.com>,
	"Alyssa Rosenzweig" <alyssa.rosenzweig@collabora.com>,
	"Viresh Kumar" <vireshk@kernel.org>, "Nishanth Menon" <nm@ti.com>,
	"Stephen Boyd" <sboyd@kernel.org>,
	"Maxime Ripard" <mripard@kernel.org>,
	"Chen-Yu Tsai" <wens@csie.org>
Cc: dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 10/15] drm/panfrost: add regulators to devfreq
Date: Thu, 28 May 2020 14:23:00 +0100	[thread overview]
Message-ID: <2f0d2cd6-481c-26ce-fcef-ee5b4fdb249b@arm.com> (raw)
In-Reply-To: <20200510165538.19720-11-peron.clem@gmail.com>

On 10/05/2020 17:55, Clément Péron wrote:
> Some OPP tables specify voltage for each frequency. Devfreq can
> handle these regulators but they should be get only 1 time to avoid
> issue and know who is in charge.
> 
> If OPP table is probe don't init regulator.
> 
> Signed-off-by: Clément Péron <peron.clem@gmail.com>

This looks like it should work - thanks for doing this!

Reviewed-by: Steven Price <steven.price@arm.com>

> ---
>   drivers/gpu/drm/panfrost/panfrost_devfreq.c | 19 +++++++++++++++++++
>   drivers/gpu/drm/panfrost/panfrost_devfreq.h |  2 ++
>   drivers/gpu/drm/panfrost/panfrost_device.c  | 11 +++++++----
>   3 files changed, 28 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/gpu/drm/panfrost/panfrost_devfreq.c b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
> index fce21c682414..9ffea0d4a087 100644
> --- a/drivers/gpu/drm/panfrost/panfrost_devfreq.c
> +++ b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
> @@ -93,6 +93,7 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
>   	unsigned long cur_freq;
>   	struct device *dev = &pfdev->pdev->dev;
>   	struct devfreq *devfreq;
> +	struct opp_table *opp_table;
>   	struct thermal_cooling_device *cooling;
>   	struct panfrost_devfreq *pfdevfreq = &pfdev->pfdevfreq;
>   
> @@ -102,6 +103,19 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
>   
>   	spin_lock_init(&pfdevfreq->lock);
>   
> +	opp_table = dev_pm_opp_set_regulators(dev, pfdev->comp->supply_names,
> +					      pfdev->comp->num_supplies);
> +	if (IS_ERR(opp_table)) {
> +		ret = PTR_ERR(opp_table);
> +		/* Continue if the optional regulator is missing */
> +		if (ret != -ENODEV) {
> +			DRM_DEV_ERROR(dev, "Couldn't set OPP regulators\n");
> +			goto err_fini;
> +		}
> +	} else {
> +		pfdevfreq->regulators_opp_table = opp_table;
> +	}
> +
>   	ret = dev_pm_opp_of_add_table(dev);
>   	if (ret) {
>   		DRM_DEV_ERROR(dev, "Couldn't add OPP table\n");
> @@ -157,6 +171,11 @@ void panfrost_devfreq_fini(struct panfrost_device *pfdev)
>   		dev_pm_opp_of_remove_table(&pfdev->pdev->dev);
>   		pfdevfreq->opp_of_table_added = false;
>   	}
> +
> +	if (pfdevfreq->regulators_opp_table) {
> +		dev_pm_opp_put_regulators(pfdevfreq->regulators_opp_table);
> +		pfdevfreq->regulators_opp_table = NULL;
> +	}
>   }
>   
>   void panfrost_devfreq_resume(struct panfrost_device *pfdev)
> diff --git a/drivers/gpu/drm/panfrost/panfrost_devfreq.h b/drivers/gpu/drm/panfrost/panfrost_devfreq.h
> index add203cb00c2..347cde4786cf 100644
> --- a/drivers/gpu/drm/panfrost/panfrost_devfreq.h
> +++ b/drivers/gpu/drm/panfrost/panfrost_devfreq.h
> @@ -8,12 +8,14 @@
>   #include <linux/ktime.h>
>   
>   struct devfreq;
> +struct opp_table;
>   struct thermal_cooling_device;
>   
>   struct panfrost_device;
>   
>   struct panfrost_devfreq {
>   	struct devfreq *devfreq;
> +	struct opp_table *regulators_opp_table;
>   	struct thermal_cooling_device *cooling;
>   	bool opp_of_table_added;
>   
> diff --git a/drivers/gpu/drm/panfrost/panfrost_device.c b/drivers/gpu/drm/panfrost/panfrost_device.c
> index 67eedf64e82d..8b17fb2e3369 100644
> --- a/drivers/gpu/drm/panfrost/panfrost_device.c
> +++ b/drivers/gpu/drm/panfrost/panfrost_device.c
> @@ -222,10 +222,13 @@ int panfrost_device_init(struct panfrost_device *pfdev)
>   		goto err_out0;
>   	}
>   
> -	err = panfrost_regulator_init(pfdev);
> -	if (err) {
> -		dev_err(pfdev->dev, "regulator init failed %d\n", err);
> -		goto err_out1;
> +	/* OPP will handle regulators */
> +	if (!pfdev->pfdevfreq.opp_of_table_added) {
> +		err = panfrost_regulator_init(pfdev);
> +		if (err) {
> +			dev_err(pfdev->dev, "regulator init failed %d\n", err);
> +			goto err_out1;
> +		}
>   	}
>   
>   	err = panfrost_reset_init(pfdev);
> 


  reply	other threads:[~2020-05-28 13:23 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-10 16:55 [PATCH 00/15][RFC] Add regulator devfreq support to Panfrost Clément Péron
2020-05-10 16:55 ` [PATCH 01/15] drm/panfrost: avoid static declaration Clément Péron
2020-05-28 13:22   ` Steven Price
2020-05-10 16:55 ` [PATCH 02/15] drm/panfrost: clean headers in devfreq Clément Péron
2020-05-28 13:22   ` Steven Price
2020-05-10 16:55 ` [PATCH 03/15] drm/panfrost: don't use pfdevfreq.busy_count to know if hw is idle Clément Péron
2020-05-28 13:22   ` Steven Price
2020-05-10 16:55 ` [PATCH 04/15] drm/panfrost: introduce panfrost_devfreq struct Clément Péron
2020-05-28 13:22   ` Steven Price
2020-05-10 16:55 ` [PATCH 05/15] drm/panfrost: use spinlock instead of atomic Clément Péron
2020-05-28 13:22   ` Steven Price
2020-05-29 12:20   ` Robin Murphy
2020-05-29 12:35     ` Clément Péron
2020-05-29 12:47       ` Steven Price
2020-05-10 16:55 ` [PATCH 06/15] drm/panfrost: properly handle error in probe Clément Péron
2020-05-28 13:22   ` Steven Price
2020-05-10 16:55 ` [PATCH 07/15] drm/panfrost: use device_property_present to check for OPP Clément Péron
2020-05-28 13:22   ` Steven Price
2020-05-29 12:45     ` Clément Péron
2020-05-10 16:55 ` [PATCH 08/15] drm/panfrost: move devfreq_init()/fini() in device Clément Péron
2020-05-28 13:22   ` Steven Price
2020-05-29 12:38     ` Clément Péron
2020-06-08 11:55       ` Tomeu Vizoso
2020-05-10 16:55 ` [PATCH 09/15] drm/panfrost: dynamically alloc regulators Clément Péron
2020-05-28 13:22   ` Steven Price
2020-05-10 16:55 ` [PATCH 10/15] drm/panfrost: add regulators to devfreq Clément Péron
2020-05-28 13:23   ` Steven Price [this message]
2020-05-29 12:37     ` Clément Péron
2020-05-10 16:55 ` [PATCH 11/15] drm/panfrost: set devfreq clock name Clément Péron
2020-05-28 13:23   ` Steven Price
2020-05-29 12:35     ` Clément Péron
2020-05-10 16:55 ` [PATCH 12/15] arm64: defconfig: Enable devfreq cooling device Clément Péron
2020-05-10 16:55 ` [PATCH 13/15] arm64: dts: allwinner: h6: Add cooling map for GPU Clément Péron
2020-05-10 16:55 ` [PATCH 14/15] [DO NOT MERGE] arm64: dts: allwinner: h6: Add GPU OPP table Clément Péron
2020-05-10 16:55 ` [PATCH 15/15] [DO NOT MERGE] arm64: dts: allwinner: force GPU regulator to be always Clément Péron
2020-05-11  5:43 ` [PATCH 00/15][RFC] Add regulator devfreq support to Panfrost Tomeu Vizoso

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2f0d2cd6-481c-26ce-fcef-ee5b4fdb249b@arm.com \
    --to=steven.price@arm.com \
    --cc=alyssa.rosenzweig@collabora.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mripard@kernel.org \
    --cc=nm@ti.com \
    --cc=peron.clem@gmail.com \
    --cc=robh@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=tomeu.vizoso@collabora.com \
    --cc=vireshk@kernel.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).