[PATCH v7 00/15] thermal: qcom: tsens: Add interrupt support

[PATCH v7 00/15] thermal: qcom: tsens: Add interrupt support

[Amit Kucheria]

Daniel, only patch 15 needs to be changed in the tree being submitted
to linux-next. But here is the entire series for completeness.

Hi Thermal and MSM maintainers,

I believe this series is now ready to be merged. The DT bindings and driver
changes should go through the thermal tree and the changes to the DT files
themselves should go through the MSM tree. There is no hard ordering
dependency because we're adding a new property to the driver. It would help
to soak in linux-next for a few weeks to catch anything on kernelci.org.

1-4, 7, 14, 15 => thermal tree
5, 6, 8-13 => msm tree (already applied by Andy)

Regards,
Amit

Changes since v6:
- Stephen reported a warning that only shows up with gcc 9.x
  (https://lore.kernel.org/lkml/CAHLCerOkeOEEUgtJ=YgDKKXDiyFXHQ4LBdzg3-3VtKvpyceqFg@mail.gmail.com/). Include a patch to initialise the index variable to zero.

Changes since v5:
- Julia found a missing put_device() call in the success path of
  tsens_register() while baking in linux-next. A single line change to
  allow the error and success path to use the call to put_device(). Thanks
  Julia and LKP.

Changes since v4:
- Change to of-thermal core[1] to force interrupts w/o changing polling-delay DT
  parameter
- Corresponding changes to DT files to remove the hunks setting the values
  to 0
- Collected reviews and acks

Changes since v3:
- Fix up the YAML definitions based on Rob's review

Changes since v2:
- Addressed Stephen's review comment
- Moved the dt-bindings to yaml (This throws up some new warnings in various QCOM
devicetrees. I'll send out a separate series to fix them up)
- Collected reviews and acks
- Added the dt-bindings to MAINTAINERS

Changes since v1:
- Collected reviews and acks
- Addressed Stephen's review comments (hopefully I got them all).
- Completely removed critical interrupt infrastructure from this series.
  Will post that separately.
- Fixed a bug in sign-extension of temperature.
- Fixed DT bindings to use the name of the interrupt e.g. "uplow" and use
  platform_get_irq_byname().

Add interrupt support to TSENS. The first 6 patches are general fixes and
cleanups to the driver before interrupt support is introduced.

[1] https://lore.kernel.org/linux-arm-msm/1b53ef537203e629328285b4597a09e4a586d688.1571181041.git.amit.kucheria@linaro.org/


Amit Kucheria (15):
  drivers: thermal: tsens: Get rid of id field in tsens_sensor
  drivers: thermal: tsens: Simplify code flow in tsens_probe
  drivers: thermal: tsens: Add __func__ identifier to debug statements
  drivers: thermal: tsens: Add debugfs support
  arm: dts: msm8974: thermal: Add thermal zones for each sensor
  arm64: dts: msm8916: thermal: Fixup HW ids for cpu sensors
  dt-bindings: thermal: tsens: Convert over to a yaml schema
  arm64: dts: sdm845: thermal: Add interrupt support
  arm64: dts: msm8996: thermal: Add interrupt support
  arm64: dts: msm8998: thermal: Add interrupt support
  arm64: dts: qcs404: thermal: Add interrupt support
  arm: dts: msm8974: thermal: Add interrupt support
  arm64: dts: msm8916: thermal: Add interrupt support
  drivers: thermal: tsens: Create function to return sign-extended
    temperature
  drivers: thermal: tsens: Add interrupt support

 .../bindings/thermal/qcom-tsens.txt           |  55 --
 .../bindings/thermal/qcom-tsens.yaml          | 168 ++++++
 MAINTAINERS                                   |   1 +
 arch/arm/boot/dts/qcom-msm8974.dtsi           |  92 +++
 arch/arm64/boot/dts/qcom/msm8916.dtsi         |   6 +-
 arch/arm64/boot/dts/qcom/msm8996.dtsi         |   4 +
 arch/arm64/boot/dts/qcom/msm8998.dtsi         |   6 +-
 arch/arm64/boot/dts/qcom/qcs404.dtsi          |   2 +
 arch/arm64/boot/dts/qcom/sdm845.dtsi          |   4 +
 drivers/thermal/qcom/tsens-8960.c             |   4 +-
 drivers/thermal/qcom/tsens-common.c           | 529 ++++++++++++++++--
 drivers/thermal/qcom/tsens-v0_1.c             |  11 +
 drivers/thermal/qcom/tsens-v1.c               |  29 +
 drivers/thermal/qcom/tsens-v2.c               |  13 +
 drivers/thermal/qcom/tsens.c                  |  59 +-
 drivers/thermal/qcom/tsens.h                  | 286 ++++++++--
 16 files changed, 1102 insertions(+), 167 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/thermal/qcom-tsens.txt
 create mode 100644 Documentation/devicetree/bindings/thermal/qcom-tsens.yaml

-- 
2.17.1

[PATCH v7 01/15] drivers: thermal: tsens: Get rid of id field in tsens_sensor

[Amit Kucheria]

There are two fields - id and hw_id - to track what sensor an action was
to performed on. This was because the sensors connected to a TSENS IP
might not be contiguous i.e. 1, 2, 4, 5 with 3 being skipped.

This causes confusion in the code which uses hw_id sometimes and id
other times (tsens_get_temp, tsens_get_trend).

Switch to only using the hw_id field to track the physical ID of the
sensor. When we iterate through all the sensors connected to an IP
block, we use an index i to loop through the list of sensors, and then
return the actual hw_id that is registered on that index.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/thermal/qcom/tsens-8960.c   |  4 ++--
 drivers/thermal/qcom/tsens-common.c | 16 +++++++++-------
 drivers/thermal/qcom/tsens.c        | 11 +++++------
 drivers/thermal/qcom/tsens.h        | 10 ++++------
 4 files changed, 20 insertions(+), 21 deletions(-)

diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c
index e46a4e3f25c4..fb77acb8d13b 100644
--- a/drivers/thermal/qcom/tsens-8960.c
+++ b/drivers/thermal/qcom/tsens-8960.c
@@ -245,11 +245,11 @@ static inline int code_to_mdegC(u32 adc_code, const struct tsens_sensor *s)
 	return adc_code * slope + offset;
 }
 
-static int get_temp_8960(struct tsens_priv *priv, int id, int *temp)
+static int get_temp_8960(struct tsens_sensor *s, int *temp)
 {
 	int ret;
 	u32 code, trdy;
-	const struct tsens_sensor *s = &priv->sensor[id];
+	struct tsens_priv *priv = s->priv;
 	unsigned long timeout;
 
 	timeout = jiffies + usecs_to_jiffies(TIMEOUT_US);
diff --git a/drivers/thermal/qcom/tsens-common.c b/drivers/thermal/qcom/tsens-common.c
index 528df8801254..c037bdf92c66 100644
--- a/drivers/thermal/qcom/tsens-common.c
+++ b/drivers/thermal/qcom/tsens-common.c
@@ -83,11 +83,12 @@ static inline int code_to_degc(u32 adc_code, const struct tsens_sensor *s)
 	return degc;
 }
 
-int get_temp_tsens_valid(struct tsens_priv *priv, int i, int *temp)
+int get_temp_tsens_valid(struct tsens_sensor *s, int *temp)
 {
-	struct tsens_sensor *s = &priv->sensor[i];
-	u32 temp_idx = LAST_TEMP_0 + s->hw_id;
-	u32 valid_idx = VALID_0 + s->hw_id;
+	struct tsens_priv *priv = s->priv;
+	int hw_id = s->hw_id;
+	u32 temp_idx = LAST_TEMP_0 + hw_id;
+	u32 valid_idx = VALID_0 + hw_id;
 	u32 last_temp = 0, valid, mask;
 	int ret;
 
@@ -123,12 +124,13 @@ int get_temp_tsens_valid(struct tsens_priv *priv, int i, int *temp)
 	return 0;
 }
 
-int get_temp_common(struct tsens_priv *priv, int i, int *temp)
+int get_temp_common(struct tsens_sensor *s, int *temp)
 {
-	struct tsens_sensor *s = &priv->sensor[i];
+	struct tsens_priv *priv = s->priv;
+	int hw_id = s->hw_id;
 	int last_temp = 0, ret;
 
-	ret = regmap_field_read(priv->rf[LAST_TEMP_0 + s->hw_id], &last_temp);
+	ret = regmap_field_read(priv->rf[LAST_TEMP_0 + hw_id], &last_temp);
 	if (ret)
 		return ret;
 
diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index 0627d8615c30..6ed687a6e53c 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -14,19 +14,19 @@
 
 static int tsens_get_temp(void *data, int *temp)
 {
-	const struct tsens_sensor *s = data;
+	struct tsens_sensor *s = data;
 	struct tsens_priv *priv = s->priv;
 
-	return priv->ops->get_temp(priv, s->id, temp);
+	return priv->ops->get_temp(s, temp);
 }
 
 static int tsens_get_trend(void *data, int trip, enum thermal_trend *trend)
 {
-	const struct tsens_sensor *s = data;
+	struct tsens_sensor *s = data;
 	struct tsens_priv *priv = s->priv;
 
 	if (priv->ops->get_trend)
-		return priv->ops->get_trend(priv, s->id, trend);
+		return priv->ops->get_trend(s, trend);
 
 	return -ENOTSUPP;
 }
@@ -86,8 +86,7 @@ static int tsens_register(struct tsens_priv *priv)
 
 	for (i = 0;  i < priv->num_sensors; i++) {
 		priv->sensor[i].priv = priv;
-		priv->sensor[i].id = i;
-		tzd = devm_thermal_zone_of_sensor_register(priv->dev, i,
+		tzd = devm_thermal_zone_of_sensor_register(priv->dev, priv->sensor[i].hw_id,
 							   &priv->sensor[i],
 							   &tsens_of_ops);
 		if (IS_ERR(tzd))
diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
index b89083b61c38..84e5447c5686 100644
--- a/drivers/thermal/qcom/tsens.h
+++ b/drivers/thermal/qcom/tsens.h
@@ -32,7 +32,6 @@ enum tsens_ver {
  * @priv: tsens device instance that this sensor is connected to
  * @tzd: pointer to the thermal zone that this sensor is in
  * @offset: offset of temperature adjustment curve
- * @id: Sensor ID
  * @hw_id: HW ID can be used in case of platform-specific IDs
  * @slope: slope of temperature adjustment curve
  * @status: 8960-specific variable to track 8960 and 8660 status register offset
@@ -41,7 +40,6 @@ struct tsens_sensor {
 	struct tsens_priv		*priv;
 	struct thermal_zone_device	*tzd;
 	int				offset;
-	unsigned int			id;
 	unsigned int			hw_id;
 	int				slope;
 	u32				status;
@@ -62,13 +60,13 @@ struct tsens_ops {
 	/* mandatory callbacks */
 	int (*init)(struct tsens_priv *priv);
 	int (*calibrate)(struct tsens_priv *priv);
-	int (*get_temp)(struct tsens_priv *priv, int i, int *temp);
+	int (*get_temp)(struct tsens_sensor *s, int *temp);
 	/* optional callbacks */
 	int (*enable)(struct tsens_priv *priv, int i);
 	void (*disable)(struct tsens_priv *priv);
 	int (*suspend)(struct tsens_priv *priv);
 	int (*resume)(struct tsens_priv *priv);
-	int (*get_trend)(struct tsens_priv *priv, int i, enum thermal_trend *trend);
+	int (*get_trend)(struct tsens_sensor *s, enum thermal_trend *trend);
 };
 
 #define REG_FIELD_FOR_EACH_SENSOR11(_name, _offset, _startbit, _stopbit) \
@@ -314,8 +312,8 @@ struct tsens_priv {
 char *qfprom_read(struct device *dev, const char *cname);
 void compute_intercept_slope(struct tsens_priv *priv, u32 *pt1, u32 *pt2, u32 mode);
 int init_common(struct tsens_priv *priv);
-int get_temp_tsens_valid(struct tsens_priv *priv, int i, int *temp);
-int get_temp_common(struct tsens_priv *priv, int i, int *temp);
+int get_temp_tsens_valid(struct tsens_sensor *s, int *temp);
+int get_temp_common(struct tsens_sensor *s, int *temp);
 
 /* TSENS target */
 extern const struct tsens_plat_data data_8960;
-- 
2.17.1

[PATCH v7 02/15] drivers: thermal: tsens: Simplify code flow in tsens_probe

[Amit Kucheria]

Move platform_set_drvdata up to avoid an extra 'if (ret)' check after
the call to tsens_register.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/thermal/qcom/tsens.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index 6ed687a6e53c..542a7f8c3d96 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -149,6 +149,8 @@ static int tsens_probe(struct platform_device *pdev)
 	priv->feat = data->feat;
 	priv->fields = data->fields;
 
+	platform_set_drvdata(pdev, priv);
+
 	if (!priv->ops || !priv->ops->init || !priv->ops->get_temp)
 		return -EINVAL;
 
@@ -167,11 +169,7 @@ static int tsens_probe(struct platform_device *pdev)
 		}
 	}
 
-	ret = tsens_register(priv);
-
-	platform_set_drvdata(pdev, priv);
-
-	return ret;
+	return tsens_register(priv);
 }
 
 static int tsens_remove(struct platform_device *pdev)
-- 
2.17.1

[PATCH v7 03/15] drivers: thermal: tsens: Add __func__ identifier to debug statements

[Amit Kucheria]

Printing the function name when enabling debugging makes logs easier to
read.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/thermal/qcom/tsens-common.c | 8 ++++----
 drivers/thermal/qcom/tsens.c        | 6 +++---
 2 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/thermal/qcom/tsens-common.c b/drivers/thermal/qcom/tsens-common.c
index c037bdf92c66..7437bfe196e5 100644
--- a/drivers/thermal/qcom/tsens-common.c
+++ b/drivers/thermal/qcom/tsens-common.c
@@ -42,8 +42,8 @@ void compute_intercept_slope(struct tsens_priv *priv, u32 *p1,
 
 	for (i = 0; i < priv->num_sensors; i++) {
 		dev_dbg(priv->dev,
-			"sensor%d - data_point1:%#x data_point2:%#x\n",
-			i, p1[i], p2[i]);
+			"%s: sensor%d - data_point1:%#x data_point2:%#x\n",
+			__func__, i, p1[i], p2[i]);
 
 		priv->sensor[i].slope = SLOPE_DEFAULT;
 		if (mode == TWO_PT_CALIB) {
@@ -60,7 +60,7 @@ void compute_intercept_slope(struct tsens_priv *priv, u32 *p1,
 		priv->sensor[i].offset = (p1[i] * SLOPE_FACTOR) -
 				(CAL_DEGC_PT1 *
 				priv->sensor[i].slope);
-		dev_dbg(priv->dev, "offset:%d\n", priv->sensor[i].offset);
+		dev_dbg(priv->dev, "%s: offset:%d\n", __func__, priv->sensor[i].offset);
 	}
 }
 
@@ -209,7 +209,7 @@ int __init init_common(struct tsens_priv *priv)
 	if (ret)
 		goto err_put_device;
 	if (!enabled) {
-		dev_err(dev, "tsens device is not enabled\n");
+		dev_err(dev, "%s: device not enabled\n", __func__);
 		ret = -ENODEV;
 		goto err_put_device;
 	}
diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index 542a7f8c3d96..06c6bbd69a1a 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -127,7 +127,7 @@ static int tsens_probe(struct platform_device *pdev)
 		of_property_read_u32(np, "#qcom,sensors", &num_sensors);
 
 	if (num_sensors <= 0) {
-		dev_err(dev, "invalid number of sensors\n");
+		dev_err(dev, "%s: invalid number of sensors\n", __func__);
 		return -EINVAL;
 	}
 
@@ -156,7 +156,7 @@ static int tsens_probe(struct platform_device *pdev)
 
 	ret = priv->ops->init(priv);
 	if (ret < 0) {
-		dev_err(dev, "tsens init failed\n");
+		dev_err(dev, "%s: init failed\n", __func__);
 		return ret;
 	}
 
@@ -164,7 +164,7 @@ static int tsens_probe(struct platform_device *pdev)
 		ret = priv->ops->calibrate(priv);
 		if (ret < 0) {
 			if (ret != -EPROBE_DEFER)
-				dev_err(dev, "tsens calibration failed\n");
+				dev_err(dev, "%s: calibration failed\n", __func__);
 			return ret;
 		}
 	}
-- 
2.17.1

[PATCH v7 04/15] drivers: thermal: tsens: Add debugfs support

[Amit Kucheria]

Dump some basic version info and sensor details into debugfs. Example
from qcs404 below:

--(/sys/kernel/debug) $ ls tsens/
4a9000.thermal-sensor  version
--(/sys/kernel/debug) $ cat tsens/version
1.4.0
--(/sys/kernel/debug) $ cat tsens/4a9000.thermal-sensor/sensors
max: 11
num: 10

      id    slope   offset
------------------------
       0     3200   404000
       1     3200   404000
       2     3200   404000
       3     3200   404000
       4     3200   404000
       5     3200   404000
       6     3200   404000
       7     3200   404000
       8     3200   404000
       9     3200   404000

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---
 drivers/thermal/qcom/tsens-common.c | 83 +++++++++++++++++++++++++++++
 drivers/thermal/qcom/tsens.c        |  2 +
 drivers/thermal/qcom/tsens.h        |  6 +++
 3 files changed, 91 insertions(+)

diff --git a/drivers/thermal/qcom/tsens-common.c b/drivers/thermal/qcom/tsens-common.c
index 7437bfe196e5..ea2c46cc6a66 100644
--- a/drivers/thermal/qcom/tsens-common.c
+++ b/drivers/thermal/qcom/tsens-common.c
@@ -3,6 +3,7 @@
  * Copyright (c) 2015, The Linux Foundation. All rights reserved.
  */
 
+#include <linux/debugfs.h>
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/nvmem-consumer.h>
@@ -139,6 +140,77 @@ int get_temp_common(struct tsens_sensor *s, int *temp)
 	return 0;
 }
 
+#ifdef CONFIG_DEBUG_FS
+static int dbg_sensors_show(struct seq_file *s, void *data)
+{
+	struct platform_device *pdev = s->private;
+	struct tsens_priv *priv = platform_get_drvdata(pdev);
+	int i;
+
+	seq_printf(s, "max: %2d\nnum: %2d\n\n",
+		   priv->feat->max_sensors, priv->num_sensors);
+
+	seq_puts(s, "      id    slope   offset\n--------------------------\n");
+	for (i = 0;  i < priv->num_sensors; i++) {
+		seq_printf(s, "%8d %8d %8d\n", priv->sensor[i].hw_id,
+			   priv->sensor[i].slope, priv->sensor[i].offset);
+	}
+
+	return 0;
+}
+
+static int dbg_version_show(struct seq_file *s, void *data)
+{
+	struct platform_device *pdev = s->private;
+	struct tsens_priv *priv = platform_get_drvdata(pdev);
+	u32 maj_ver, min_ver, step_ver;
+	int ret;
+
+	if (tsens_ver(priv) > VER_0_1) {
+		ret = regmap_field_read(priv->rf[VER_MAJOR], &maj_ver);
+		if (ret)
+			return ret;
+		ret = regmap_field_read(priv->rf[VER_MINOR], &min_ver);
+		if (ret)
+			return ret;
+		ret = regmap_field_read(priv->rf[VER_STEP], &step_ver);
+		if (ret)
+			return ret;
+		seq_printf(s, "%d.%d.%d\n", maj_ver, min_ver, step_ver);
+	} else {
+		seq_puts(s, "0.1.0\n");
+	}
+
+	return 0;
+}
+
+DEFINE_SHOW_ATTRIBUTE(dbg_version);
+DEFINE_SHOW_ATTRIBUTE(dbg_sensors);
+
+static void tsens_debug_init(struct platform_device *pdev)
+{
+	struct tsens_priv *priv = platform_get_drvdata(pdev);
+	struct dentry *root, *file;
+
+	root = debugfs_lookup("tsens", NULL);
+	if (!root)
+		priv->debug_root = debugfs_create_dir("tsens", NULL);
+	else
+		priv->debug_root = root;
+
+	file = debugfs_lookup("version", priv->debug_root);
+	if (!file)
+		debugfs_create_file("version", 0444, priv->debug_root,
+				    pdev, &dbg_version_fops);
+
+	/* A directory for each instance of the TSENS IP */
+	priv->debug = debugfs_create_dir(dev_name(&pdev->dev), priv->debug_root);
+	debugfs_create_file("sensors", 0444, priv->debug, pdev, &dbg_sensors_fops);
+}
+#else
+static inline void tsens_debug_init(struct platform_device *pdev) {}
+#endif
+
 static const struct regmap_config tsens_config = {
 	.name		= "tm",
 	.reg_bits	= 32,
@@ -199,6 +271,15 @@ int __init init_common(struct tsens_priv *priv)
 		goto err_put_device;
 	}
 
+	if (tsens_ver(priv) > VER_0_1) {
+		for (i = VER_MAJOR; i <= VER_STEP; i++) {
+			priv->rf[i] = devm_regmap_field_alloc(dev, priv->srot_map,
+							      priv->fields[i]);
+			if (IS_ERR(priv->rf[i]))
+				return PTR_ERR(priv->rf[i]);
+		}
+	}
+
 	priv->rf[TSENS_EN] = devm_regmap_field_alloc(dev, priv->srot_map,
 						     priv->fields[TSENS_EN]);
 	if (IS_ERR(priv->rf[TSENS_EN])) {
@@ -238,6 +319,8 @@ int __init init_common(struct tsens_priv *priv)
 		}
 	}
 
+	tsens_debug_init(op);
+
 	return 0;
 
 err_put_device:
diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index 06c6bbd69a1a..772aa76b50e1 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -3,6 +3,7 @@
  * Copyright (c) 2015, The Linux Foundation. All rights reserved.
  */
 
+#include <linux/debugfs.h>
 #include <linux/err.h>
 #include <linux/module.h>
 #include <linux/of.h>
@@ -176,6 +177,7 @@ static int tsens_remove(struct platform_device *pdev)
 {
 	struct tsens_priv *priv = platform_get_drvdata(pdev);
 
+	debugfs_remove_recursive(priv->debug_root);
 	if (priv->ops->disable)
 		priv->ops->disable(priv);
 
diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
index 84e5447c5686..00899c17e848 100644
--- a/drivers/thermal/qcom/tsens.h
+++ b/drivers/thermal/qcom/tsens.h
@@ -293,6 +293,8 @@ struct tsens_context {
  * @feat: features of the IP
  * @fields: bitfield locations
  * @ops: pointer to list of callbacks supported by this device
+ * @debug_root: pointer to debugfs dentry for all tsens
+ * @debug: pointer to debugfs dentry for tsens controller
  * @sensor: list of sensors attached to this device
  */
 struct tsens_priv {
@@ -306,6 +308,10 @@ struct tsens_priv {
 	const struct tsens_features	*feat;
 	const struct reg_field		*fields;
 	const struct tsens_ops		*ops;
+
+	struct dentry			*debug_root;
+	struct dentry			*debug;
+
 	struct tsens_sensor		sensor[0];
 };
 
-- 
2.17.1

[PATCH v7 05/15] arm: dts: msm8974: thermal: Add thermal zones for each sensor

[Amit Kucheria]

msm8974 has 11 sensors connected to a single TSENS IP. Define a thermal
zone for each of those sensors to expose the temperature of each zone.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Tested-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---
 arch/arm/boot/dts/qcom-msm8974.dtsi | 90 +++++++++++++++++++++++++++++
 1 file changed, 90 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 369e58f64145..33c534370fd5 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -217,6 +217,96 @@
 				};
 			};
 		};
+
+		q6-dsp-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 1>;
+
+			trips {
+				q6_dsp_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		modemtx-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 2>;
+
+			trips {
+				modemtx_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		video-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 3>;
+
+			trips {
+				video_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		wlan-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 4>;
+
+			trips {
+				wlan_alert0: trip-point0 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		gpu-thermal-top {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 9>;
+
+			trips {
+				gpu1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		gpu-thermal-bottom {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 10>;
+
+			trips {
+				gpu2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
 	};
 
 	cpu-pmu {
-- 
2.17.1

[PATCH v7 06/15] arm64: dts: msm8916: thermal: Fixup HW ids for cpu sensors

[Amit Kucheria]

msm8916 uses sensors 0, 1, 2, 4 and 5. Sensor 3 is NOT used. Fixup the
device tree so that the correct sensor ID is used and as a result we can
actually check the temperature for the cpu2_3 sensor.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---
 arch/arm64/boot/dts/qcom/msm8916.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 5ea9fb8f2f87..8686e101905c 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -179,7 +179,7 @@
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
-			thermal-sensors = <&tsens 4>;
+			thermal-sensors = <&tsens 5>;
 
 			trips {
 				cpu0_1_alert0: trip-point@0 {
@@ -209,7 +209,7 @@
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
-			thermal-sensors = <&tsens 3>;
+			thermal-sensors = <&tsens 4>;
 
 			trips {
 				cpu2_3_alert0: trip-point@0 {
-- 
2.17.1

[PATCH v7 07/15] dt-bindings: thermal: tsens: Convert over to a yaml schema

[Amit Kucheria]

Older IP only supports the 'uplow' interrupt, but newer IP supports
'uplow' and 'critical' interrupts. Document interrupt support in the
tsens driver by converting over to a YAML schema.

Suggested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../bindings/thermal/qcom-tsens.txt           |  55 ------
 .../bindings/thermal/qcom-tsens.yaml          | 168 ++++++++++++++++++
 MAINTAINERS                                   |   1 +
 3 files changed, 169 insertions(+), 55 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/thermal/qcom-tsens.txt
 create mode 100644 Documentation/devicetree/bindings/thermal/qcom-tsens.yaml

diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
deleted file mode 100644
index 673cc1831ee9..000000000000
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
+++ /dev/null
@@ -1,55 +0,0 @@
-* QCOM SoC Temperature Sensor (TSENS)
-
-Required properties:
-- compatible:
-  Must be one of the following:
-    - "qcom,msm8916-tsens" (MSM8916)
-    - "qcom,msm8974-tsens" (MSM8974)
-    - "qcom,msm8996-tsens" (MSM8996)
-    - "qcom,qcs404-tsens", "qcom,tsens-v1" (QCS404)
-    - "qcom,msm8998-tsens", "qcom,tsens-v2" (MSM8998)
-    - "qcom,sdm845-tsens", "qcom,tsens-v2" (SDM845)
-  The generic "qcom,tsens-v2" property must be used as a fallback for any SoC
-  with version 2 of the TSENS IP. MSM8996 is the only exception because the
-  generic property did not exist when support was added.
-  Similarly, the generic "qcom,tsens-v1" property must be used as a fallback for
-  any SoC with version 1 of the TSENS IP.
-
-- reg: Address range of the thermal registers.
-  New platforms containing v2.x.y of the TSENS IP must specify the SROT and TM
-  register spaces separately, with order being TM before SROT.
-  See Example 2, below.
-
-- #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description.
-- #qcom,sensors: Number of sensors in tsens block
-- Refer to Documentation/devicetree/bindings/nvmem/nvmem.txt to know how to specify
-nvmem cells
-
-Example 1 (legacy support before a fallback tsens-v2 property was introduced):
-tsens: thermal-sensor@900000 {
-		compatible = "qcom,msm8916-tsens";
-		reg = <0x4a8000 0x2000>;
-		nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
-		nvmem-cell-names = "caldata", "calsel";
-		#thermal-sensor-cells = <1>;
-	};
-
-Example 2 (for any platform containing v2 of the TSENS IP):
-tsens0: thermal-sensor@c263000 {
-		compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
-		reg = <0xc263000 0x1ff>, /* TM */
-			<0xc222000 0x1ff>; /* SROT */
-		#qcom,sensors = <13>;
-		#thermal-sensor-cells = <1>;
-	};
-
-Example 3 (for any platform containing v1 of the TSENS IP):
-tsens: thermal-sensor@4a9000 {
-		compatible = "qcom,qcs404-tsens", "qcom,tsens-v1";
-		reg = <0x004a9000 0x1000>, /* TM */
-		      <0x004a8000 0x1000>; /* SROT */
-		nvmem-cells = <&tsens_caldata>;
-		nvmem-cell-names = "calib";
-		#qcom,sensors = <10>;
-		#thermal-sensor-cells = <1>;
-	};
diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
new file mode 100644
index 000000000000..23afc7bf5a44
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -0,0 +1,168 @@
+# SPDX-License-Identifier: (GPL-2.0 OR MIT)
+# Copyright 2019 Linaro Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/qcom-tsens.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: QCOM SoC Temperature Sensor (TSENS)
+
+maintainers:
+  - Amit Kucheria <amit.kucheria@linaro.org>
+
+description: |
+  QCOM SoCs have TSENS IP to allow temperature measurement. There are currently
+  three distinct major versions of the IP that is supported by a single driver.
+  The IP versions are named v0.1, v1 and v2 in the driver, where v0.1 captures
+  everything before v1 when there was no versioning information.
+
+properties:
+  compatible:
+    oneOf:
+      - description: v0.1 of TSENS
+        items:
+          - enum:
+              - qcom,msm8916-tsens
+              - qcom,msm8974-tsens
+          - const: qcom,tsens-v0_1
+
+      - description: v1 of TSENS
+        items:
+          - enum:
+              - qcom,qcs404-tsens
+          - const: qcom,tsens-v1
+
+      - description: v2 of TSENS
+        items:
+          - enum:
+              - qcom,msm8996-tsens
+              - qcom,msm8998-tsens
+              - qcom,sdm845-tsens
+          - const: qcom,tsens-v2
+
+  reg:
+    maxItems: 2
+    items:
+      - description: TM registers
+      - description: SROT registers
+
+  nvmem-cells:
+    minItems: 1
+    maxItems: 2
+    description:
+      Reference to an nvmem node for the calibration data
+
+  nvmem-cells-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      - enum:
+        - caldata
+        - calsel
+
+  "#qcom,sensors":
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - minimum: 1
+      - maximum: 16
+    description:
+      Number of sensors enabled on this platform
+
+  "#thermal-sensor-cells":
+    const: 1
+    description:
+      Number of cells required to uniquely identify the thermal sensors. Since
+      we have multiple sensors this is set to 1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8916-tsens
+              - qcom,msm8974-tsens
+              - qcom,qcs404-tsens
+              - qcom,tsens-v0_1
+              - qcom,tsens-v1
+    then:
+      properties:
+        interrupts:
+          items:
+            - description: Combined interrupt if upper or lower threshold crossed
+        interrupt-names:
+          items:
+            - const: uplow
+
+    else:
+      properties:
+        interrupts:
+          items:
+            - description: Combined interrupt if upper or lower threshold crossed
+            - description: Interrupt if critical threshold crossed
+        interrupt-names:
+          items:
+            - const: uplow
+            - const: critical
+
+required:
+  - compatible
+  - reg
+  - "#qcom,sensors"
+  - interrupts
+  - interrupt-names
+  - "#thermal-sensor-cells"
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    // Example 1 (legacy: for pre v1 IP):
+    tsens1: thermal-sensor@900000 {
+           compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1";
+           reg = <0x4a9000 0x1000>, /* TM */
+                 <0x4a8000 0x1000>; /* SROT */
+
+           nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
+           nvmem-cell-names = "caldata", "calsel";
+
+           interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+           interrupt-names = "uplow";
+
+           #qcom,sensors = <5>;
+           #thermal-sensor-cells = <1>;
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    // Example 2 (for any platform containing v1 of the TSENS IP):
+    tsens2: thermal-sensor@4a9000 {
+          compatible = "qcom,qcs404-tsens", "qcom,tsens-v1";
+          reg = <0x004a9000 0x1000>, /* TM */
+                <0x004a8000 0x1000>; /* SROT */
+
+          nvmem-cells = <&tsens_caldata>;
+          nvmem-cell-names = "calib";
+
+          interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>;
+          interrupt-names = "uplow";
+
+          #qcom,sensors = <10>;
+          #thermal-sensor-cells = <1>;
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    // Example 3 (for any platform containing v2 of the TSENS IP):
+    tsens3: thermal-sensor@c263000 {
+           compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
+           reg = <0xc263000 0x1ff>,
+                 <0xc222000 0x1ff>;
+
+           interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+                        <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+           interrupt-names = "uplow", "critical";
+
+           #qcom,sensors = <13>;
+           #thermal-sensor-cells = <1>;
+    };
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index a69e6db80c79..c4df814b87b0 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13513,6 +13513,7 @@ L:	linux-pm@vger.kernel.org
 L:	linux-arm-msm@vger.kernel.org
 S:	Maintained
 F:	drivers/thermal/qcom/
+F:	Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
 
 QUALCOMM VENUS VIDEO ACCELERATOR DRIVER
 M:	Stanimir Varbanov <stanimir.varbanov@linaro.org>
-- 
2.17.1

[PATCH v7 08/15] arm64: dts: sdm845: thermal: Add interrupt support

[Amit Kucheria]

Register upper-lower interrupts for each of the two tsens controllers.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index f406a4340b05..0990d5761860 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -2950,6 +2950,8 @@
 			reg = <0 0x0c263000 0 0x1ff>, /* TM */
 			      <0 0x0c222000 0 0x1ff>; /* SROT */
 			#qcom,sensors = <13>;
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
 			#thermal-sensor-cells = <1>;
 		};
 
@@ -2958,6 +2960,8 @@
 			reg = <0 0x0c265000 0 0x1ff>, /* TM */
 			      <0 0x0c223000 0 0x1ff>; /* SROT */
 			#qcom,sensors = <8>;
+			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
 			#thermal-sensor-cells = <1>;
 		};
 
-- 
2.17.1

[PATCH v7 09/15] arm64: dts: msm8996: thermal: Add interrupt support

[Amit Kucheria]

Register upper-lower interrupts for each of the two tsens controllers.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 87f4d9c1b0d4..4ca2e7b44559 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -591,6 +591,8 @@
 			reg = <0x4a9000 0x1000>, /* TM */
 			      <0x4a8000 0x1000>; /* SROT */
 			#qcom,sensors = <13>;
+			interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
 			#thermal-sensor-cells = <1>;
 		};
 
@@ -599,6 +601,8 @@
 			reg = <0x4ad000 0x1000>, /* TM */
 			      <0x4ac000 0x1000>; /* SROT */
 			#qcom,sensors = <8>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
 			#thermal-sensor-cells = <1>;
 		};
 
-- 
2.17.1

[PATCH v7 10/15] arm64: dts: msm8998: thermal: Add interrupt support

[Amit Kucheria]

Register upper-lower interrupts for each of the two tsens controllers.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
---
 arch/arm64/boot/dts/qcom/msm8998.dtsi | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index c6f81431983e..489d631a9610 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -816,8 +816,9 @@
 			compatible = "qcom,msm8998-tsens", "qcom,tsens-v2";
 			reg = <0x010ab000 0x1000>, /* TM */
 			      <0x010aa000 0x1000>; /* SROT */
-
 			#qcom,sensors = <14>;
+			interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
 			#thermal-sensor-cells = <1>;
 		};
 
@@ -825,8 +826,9 @@
 			compatible = "qcom,msm8998-tsens", "qcom,tsens-v2";
 			reg = <0x010ae000 0x1000>, /* TM */
 			      <0x010ad000 0x1000>; /* SROT */
-
 			#qcom,sensors = <8>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
 			#thermal-sensor-cells = <1>;
 		};
 
-- 
2.17.1

[PATCH v7 11/15] arm64: dts: qcs404: thermal: Add interrupt support

[Amit Kucheria]

Register upper-lower interrupt for the tsens controller.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
---
 arch/arm64/boot/dts/qcom/qcs404.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index a97eeb4569c0..b6a4e6073936 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -290,6 +290,8 @@
 			nvmem-cells = <&tsens_caldata>;
 			nvmem-cell-names = "calib";
 			#qcom,sensors = <10>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
 			#thermal-sensor-cells = <1>;
 		};
 
-- 
2.17.1

[PATCH v7 12/15] arm: dts: msm8974: thermal: Add interrupt support

[Amit Kucheria]

Register upper-lower interrupt for the tsens controller.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Tested-by: Brian Masney <masneyb@onstation.org>
---
 arch/arm/boot/dts/qcom-msm8974.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 33c534370fd5..c1a3a7d7161c 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -531,6 +531,8 @@
 			nvmem-cells = <&tsens_calib>, <&tsens_backup>;
 			nvmem-cell-names = "calib", "calib_backup";
 			#qcom,sensors = <11>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
 			#thermal-sensor-cells = <1>;
 		};
 
-- 
2.17.1

[PATCH v7 13/15] arm64: dts: msm8916: thermal: Add interrupt support

[Amit Kucheria]

Register upper-lower interrupt for the tsens controller.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
---
 arch/arm64/boot/dts/qcom/msm8916.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 8686e101905c..807f86a4535e 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -816,6 +816,8 @@
 			nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
 			nvmem-cell-names = "calib", "calib_sel";
 			#qcom,sensors = <5>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
 			#thermal-sensor-cells = <1>;
 		};
 
-- 
2.17.1

[PATCH v7 14/15] drivers: thermal: tsens: Create function to return sign-extended temperature

[Amit Kucheria]

Hide the details of how to convert values read from TSENS HW to mCelsius
behind a function. All versions of the IP can be supported as a result.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---
 drivers/thermal/qcom/tsens-common.c | 49 ++++++++++++++++++++---------
 1 file changed, 35 insertions(+), 14 deletions(-)

diff --git a/drivers/thermal/qcom/tsens-common.c b/drivers/thermal/qcom/tsens-common.c
index ea2c46cc6a66..c34a1a26ce29 100644
--- a/drivers/thermal/qcom/tsens-common.c
+++ b/drivers/thermal/qcom/tsens-common.c
@@ -84,13 +84,46 @@ static inline int code_to_degc(u32 adc_code, const struct tsens_sensor *s)
 	return degc;
 }
 
+/**
+ * tsens_hw_to_mC - Return sign-extended temperature in mCelsius.
+ * @s:     Pointer to sensor struct
+ * @field: Index into regmap_field array pointing to temperature data
+ *
+ * This function handles temperature returned in ADC code or deciCelsius
+ * depending on IP version.
+ *
+ * Return: Temperature in milliCelsius on success, a negative errno will
+ * be returned in error cases
+ */
+static int tsens_hw_to_mC(struct tsens_sensor *s, int field)
+{
+	struct tsens_priv *priv = s->priv;
+	u32 resolution;
+	u32 temp = 0;
+	int ret;
+
+	resolution = priv->fields[LAST_TEMP_0].msb -
+		priv->fields[LAST_TEMP_0].lsb;
+
+	ret = regmap_field_read(priv->rf[field], &temp);
+	if (ret)
+		return ret;
+
+	/* Convert temperature from ADC code to milliCelsius */
+	if (priv->feat->adc)
+		return code_to_degc(temp, s) * 1000;
+
+	/* deciCelsius -> milliCelsius along with sign extension */
+	return sign_extend32(temp, resolution) * 100;
+}
+
 int get_temp_tsens_valid(struct tsens_sensor *s, int *temp)
 {
 	struct tsens_priv *priv = s->priv;
 	int hw_id = s->hw_id;
 	u32 temp_idx = LAST_TEMP_0 + hw_id;
 	u32 valid_idx = VALID_0 + hw_id;
-	u32 last_temp = 0, valid, mask;
+	u32 valid;
 	int ret;
 
 	ret = regmap_field_read(priv->rf[valid_idx], &valid);
@@ -108,19 +141,7 @@ int get_temp_tsens_valid(struct tsens_sensor *s, int *temp)
 	}
 
 	/* Valid bit is set, OK to read the temperature */
-	ret = regmap_field_read(priv->rf[temp_idx], &last_temp);
-	if (ret)
-		return ret;
-
-	if (priv->feat->adc) {
-		/* Convert temperature from ADC code to milliCelsius */
-		*temp = code_to_degc(last_temp, s) * 1000;
-	} else {
-		mask = GENMASK(priv->fields[LAST_TEMP_0].msb,
-			       priv->fields[LAST_TEMP_0].lsb);
-		/* Convert temperature from deciCelsius to milliCelsius */
-		*temp = sign_extend32(last_temp, fls(mask) - 1) * 100;
-	}
+	*temp = tsens_hw_to_mC(s, temp_idx);
 
 	return 0;
 }
-- 
2.17.1

[PATCH v7 15/15] drivers: thermal: tsens: Add interrupt support

[Amit Kucheria]

Depending on the IP version, TSENS supports upper, lower and critical
threshold interrupts. We only add support for upper and lower threshold
interrupts for now.

TSENSv2 has an irq [status|clear|mask] bit tuple for each sensor while
earlier versions only have a single bit per sensor to denote status and
clear. These differences are handled transparently by the interrupt
handler. At each interrupt, we reprogram the new upper and lower threshold
in the .set_trip callback.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---
 drivers/thermal/qcom/tsens-common.c | 377 ++++++++++++++++++++++++++--
 drivers/thermal/qcom/tsens-v0_1.c   |  11 +
 drivers/thermal/qcom/tsens-v1.c     |  29 +++
 drivers/thermal/qcom/tsens-v2.c     |  13 +
 drivers/thermal/qcom/tsens.c        |  32 ++-
 drivers/thermal/qcom/tsens.h        | 270 ++++++++++++++++----
 6 files changed, 669 insertions(+), 63 deletions(-)

diff --git a/drivers/thermal/qcom/tsens-common.c b/drivers/thermal/qcom/tsens-common.c
index c34a1a26ce29..4359a4247ac3 100644
--- a/drivers/thermal/qcom/tsens-common.c
+++ b/drivers/thermal/qcom/tsens-common.c
@@ -13,6 +13,31 @@
 #include <linux/regmap.h>
 #include "tsens.h"
 
+/**
+ * struct tsens_irq_data - IRQ status and temperature violations
+ * @up_viol:        upper threshold violated
+ * @up_thresh:      upper threshold temperature value
+ * @up_irq_mask:    mask register for upper threshold irqs
+ * @up_irq_clear:   clear register for uppper threshold irqs
+ * @low_viol:       lower threshold violated
+ * @low_thresh:     lower threshold temperature value
+ * @low_irq_mask:   mask register for lower threshold irqs
+ * @low_irq_clear:  clear register for lower threshold irqs
+ *
+ * Structure containing data about temperature threshold settings and
+ * irq status if they were violated.
+ */
+struct tsens_irq_data {
+	u32 up_viol;
+	int up_thresh;
+	u32 up_irq_mask;
+	u32 up_irq_clear;
+	u32 low_viol;
+	int low_thresh;
+	u32 low_irq_mask;
+	u32 low_irq_clear;
+};
+
 char *qfprom_read(struct device *dev, const char *cname)
 {
 	struct nvmem_cell *cell;
@@ -65,6 +90,14 @@ void compute_intercept_slope(struct tsens_priv *priv, u32 *p1,
 	}
 }
 
+static inline u32 degc_to_code(int degc, const struct tsens_sensor *s)
+{
+	u64 code = (degc * s->slope + s->offset) / SLOPE_FACTOR;
+
+	pr_debug("%s: raw_code: 0x%llx, degc:%d\n", __func__, code, degc);
+	return clamp_val(code, THRESHOLD_MIN_ADC_CODE, THRESHOLD_MAX_ADC_CODE);
+}
+
 static inline int code_to_degc(u32 adc_code, const struct tsens_sensor *s)
 {
 	int degc, num, den;
@@ -117,6 +150,313 @@ static int tsens_hw_to_mC(struct tsens_sensor *s, int field)
 	return sign_extend32(temp, resolution) * 100;
 }
 
+/**
+ * tsens_mC_to_hw - Convert temperature to hardware register value
+ * @s: Pointer to sensor struct
+ * @temp: temperature in milliCelsius to be programmed to hardware
+ *
+ * This function outputs the value to be written to hardware in ADC code
+ * or deciCelsius depending on IP version.
+ *
+ * Return: ADC code or temperature in deciCelsius.
+ */
+static int tsens_mC_to_hw(struct tsens_sensor *s, int temp)
+{
+	struct tsens_priv *priv = s->priv;
+
+	/* milliC to adc code */
+	if (priv->feat->adc)
+		return degc_to_code(temp / 1000, s);
+
+	/* milliC to deciC */
+	return temp / 100;
+}
+
+static inline enum tsens_ver tsens_version(struct tsens_priv *priv)
+{
+	return priv->feat->ver_major;
+}
+
+static void tsens_set_interrupt_v1(struct tsens_priv *priv, u32 hw_id,
+				   enum tsens_irq_type irq_type, bool enable)
+{
+	u32 index = 0;
+
+	switch (irq_type) {
+	case UPPER:
+		index = UP_INT_CLEAR_0 + hw_id;
+		break;
+	case LOWER:
+		index = LOW_INT_CLEAR_0 + hw_id;
+		break;
+	}
+	regmap_field_write(priv->rf[index], enable ? 0 : 1);
+}
+
+static void tsens_set_interrupt_v2(struct tsens_priv *priv, u32 hw_id,
+				   enum tsens_irq_type irq_type, bool enable)
+{
+	u32 index_mask = 0, index_clear = 0;
+
+	/*
+	 * To enable the interrupt flag for a sensor:
+	 *    - clear the mask bit
+	 * To disable the interrupt flag for a sensor:
+	 *    - Mask further interrupts for this sensor
+	 *    - Write 1 followed by 0 to clear the interrupt
+	 */
+	switch (irq_type) {
+	case UPPER:
+		index_mask  = UP_INT_MASK_0 + hw_id;
+		index_clear = UP_INT_CLEAR_0 + hw_id;
+		break;
+	case LOWER:
+		index_mask  = LOW_INT_MASK_0 + hw_id;
+		index_clear = LOW_INT_CLEAR_0 + hw_id;
+		break;
+	}
+
+	if (enable) {
+		regmap_field_write(priv->rf[index_mask], 0);
+	} else {
+		regmap_field_write(priv->rf[index_mask],  1);
+		regmap_field_write(priv->rf[index_clear], 1);
+		regmap_field_write(priv->rf[index_clear], 0);
+	}
+}
+
+/**
+ * tsens_set_interrupt - Set state of an interrupt
+ * @priv: Pointer to tsens controller private data
+ * @hw_id: Hardware ID aka. sensor number
+ * @irq_type: irq_type from enum tsens_irq_type
+ * @enable: false = disable, true = enable
+ *
+ * Call IP-specific function to set state of an interrupt
+ *
+ * Return: void
+ */
+static void tsens_set_interrupt(struct tsens_priv *priv, u32 hw_id,
+				enum tsens_irq_type irq_type, bool enable)
+{
+	dev_dbg(priv->dev, "[%u] %s: %s -> %s\n", hw_id, __func__,
+		irq_type ? ((irq_type == 1) ? "UP" : "CRITICAL") : "LOW",
+		enable ? "en" : "dis");
+	if (tsens_version(priv) > VER_1_X)
+		tsens_set_interrupt_v2(priv, hw_id, irq_type, enable);
+	else
+		tsens_set_interrupt_v1(priv, hw_id, irq_type, enable);
+}
+
+/**
+ * tsens_threshold_violated - Check if a sensor temperature violated a preset threshold
+ * @priv: Pointer to tsens controller private data
+ * @hw_id: Hardware ID aka. sensor number
+ * @d: Pointer to irq state data
+ *
+ * Return: 0 if threshold was not violated, 1 if it was violated and negative
+ * errno in case of errors
+ */
+static int tsens_threshold_violated(struct tsens_priv *priv, u32 hw_id,
+				    struct tsens_irq_data *d)
+{
+	int ret;
+
+	ret = regmap_field_read(priv->rf[UPPER_STATUS_0 + hw_id], &d->up_viol);
+	if (ret)
+		return ret;
+	ret = regmap_field_read(priv->rf[LOWER_STATUS_0 + hw_id], &d->low_viol);
+	if (ret)
+		return ret;
+	if (d->up_viol || d->low_viol)
+		return 1;
+
+	return 0;
+}
+
+static int tsens_read_irq_state(struct tsens_priv *priv, u32 hw_id,
+				struct tsens_sensor *s, struct tsens_irq_data *d)
+{
+	int ret;
+
+	ret = regmap_field_read(priv->rf[UP_INT_CLEAR_0 + hw_id], &d->up_irq_clear);
+	if (ret)
+		return ret;
+	ret = regmap_field_read(priv->rf[LOW_INT_CLEAR_0 + hw_id], &d->low_irq_clear);
+	if (ret)
+		return ret;
+	if (tsens_version(priv) > VER_1_X) {
+		ret = regmap_field_read(priv->rf[UP_INT_MASK_0 + hw_id], &d->up_irq_mask);
+		if (ret)
+			return ret;
+		ret = regmap_field_read(priv->rf[LOW_INT_MASK_0 + hw_id], &d->low_irq_mask);
+		if (ret)
+			return ret;
+	} else {
+		/* No mask register on older TSENS */
+		d->up_irq_mask = 0;
+		d->low_irq_mask = 0;
+	}
+
+	d->up_thresh  = tsens_hw_to_mC(s, UP_THRESH_0 + hw_id);
+	d->low_thresh = tsens_hw_to_mC(s, LOW_THRESH_0 + hw_id);
+
+	dev_dbg(priv->dev, "[%u] %s%s: status(%u|%u) | clr(%u|%u) | mask(%u|%u)\n",
+		hw_id, __func__, (d->up_viol || d->low_viol) ? "(V)" : "",
+		d->low_viol, d->up_viol, d->low_irq_clear, d->up_irq_clear,
+		d->low_irq_mask, d->up_irq_mask);
+	dev_dbg(priv->dev, "[%u] %s%s: thresh: (%d:%d)\n", hw_id, __func__,
+		(d->up_viol || d->low_viol) ? "(violation)" : "",
+		d->low_thresh, d->up_thresh);
+
+	return 0;
+}
+
+static inline u32 masked_irq(u32 hw_id, u32 mask, enum tsens_ver ver)
+{
+	if (ver > VER_1_X)
+		return mask & (1 << hw_id);
+
+	/* v1, v0.1 don't have a irq mask register */
+	return 0;
+}
+
+/**
+ * tsens_irq_thread - Threaded interrupt handler for uplow interrupts
+ * @irq: irq number
+ * @data: tsens controller private data
+ *
+ * Check all sensors to find ones that violated their threshold limits. If the
+ * temperature is still outside the limits, call thermal_zone_device_update() to
+ * update the thresholds, else re-enable the interrupts.
+ *
+ * The level-triggered interrupt might deassert if the temperature returned to
+ * within the threshold limits by the time the handler got scheduled. We
+ * consider the irq to have been handled in that case.
+ *
+ * Return: IRQ_HANDLED
+ */
+irqreturn_t tsens_irq_thread(int irq, void *data)
+{
+	struct tsens_priv *priv = data;
+	struct tsens_irq_data d;
+	bool enable = true, disable = false;
+	unsigned long flags;
+	int temp, ret, i;
+
+	for (i = 0; i < priv->num_sensors; i++) {
+		bool trigger = false;
+		struct tsens_sensor *s = &priv->sensor[i];
+		u32 hw_id = s->hw_id;
+
+		if (IS_ERR(priv->sensor[i].tzd))
+			continue;
+		if (!tsens_threshold_violated(priv, hw_id, &d))
+			continue;
+		ret = get_temp_tsens_valid(s, &temp);
+		if (ret) {
+			dev_err(priv->dev, "[%u] %s: error reading sensor\n", hw_id, __func__);
+			continue;
+		}
+
+		spin_lock_irqsave(&priv->ul_lock, flags);
+
+		tsens_read_irq_state(priv, hw_id, s, &d);
+
+		if (d.up_viol &&
+		    !masked_irq(hw_id, d.up_irq_mask, tsens_version(priv))) {
+			tsens_set_interrupt(priv, hw_id, UPPER, disable);
+			if (d.up_thresh > temp) {
+				dev_dbg(priv->dev, "[%u] %s: re-arm upper\n",
+					priv->sensor[i].hw_id, __func__);
+				tsens_set_interrupt(priv, hw_id, UPPER, enable);
+			} else {
+				trigger = true;
+				/* Keep irq masked */
+			}
+		} else if (d.low_viol &&
+			   !masked_irq(hw_id, d.low_irq_mask, tsens_version(priv))) {
+			tsens_set_interrupt(priv, hw_id, LOWER, disable);
+			if (d.low_thresh < temp) {
+				dev_dbg(priv->dev, "[%u] %s: re-arm low\n",
+					priv->sensor[i].hw_id, __func__);
+				tsens_set_interrupt(priv, hw_id, LOWER, enable);
+			} else {
+				trigger = true;
+				/* Keep irq masked */
+			}
+		}
+
+		spin_unlock_irqrestore(&priv->ul_lock, flags);
+
+		if (trigger) {
+			dev_dbg(priv->dev, "[%u] %s: TZ update trigger (%d mC)\n",
+				hw_id, __func__, temp);
+			thermal_zone_device_update(priv->sensor[i].tzd,
+						   THERMAL_EVENT_UNSPECIFIED);
+		} else {
+			dev_dbg(priv->dev, "[%u] %s: no violation:  %d\n",
+				hw_id, __func__, temp);
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+int tsens_set_trips(void *_sensor, int low, int high)
+{
+	struct tsens_sensor *s = _sensor;
+	struct tsens_priv *priv = s->priv;
+	struct device *dev = priv->dev;
+	struct tsens_irq_data d;
+	unsigned long flags;
+	int high_val, low_val, cl_high, cl_low;
+	u32 hw_id = s->hw_id;
+
+	dev_dbg(dev, "[%u] %s: proposed thresholds: (%d:%d)\n",
+		hw_id, __func__, low, high);
+
+	cl_high = clamp_val(high, -40000, 120000);
+	cl_low  = clamp_val(low, -40000, 120000);
+
+	high_val = tsens_mC_to_hw(s, cl_high);
+	low_val  = tsens_mC_to_hw(s, cl_low);
+
+	spin_lock_irqsave(&priv->ul_lock, flags);
+
+	tsens_read_irq_state(priv, hw_id, s, &d);
+
+	/* Write the new thresholds and clear the status */
+	regmap_field_write(priv->rf[LOW_THRESH_0 + hw_id], low_val);
+	regmap_field_write(priv->rf[UP_THRESH_0 + hw_id], high_val);
+	tsens_set_interrupt(priv, hw_id, LOWER, true);
+	tsens_set_interrupt(priv, hw_id, UPPER, true);
+
+	spin_unlock_irqrestore(&priv->ul_lock, flags);
+
+	dev_dbg(dev, "[%u] %s: (%d:%d)->(%d:%d)\n",
+		s->hw_id, __func__, d.low_thresh, d.up_thresh, cl_low, cl_high);
+
+	return 0;
+}
+
+int tsens_enable_irq(struct tsens_priv *priv)
+{
+	int ret;
+	int val = tsens_version(priv) > VER_1_X ? 7 : 1;
+
+	ret = regmap_field_write(priv->rf[INT_EN], val);
+	if (ret < 0)
+		dev_err(priv->dev, "%s: failed to enable interrupts\n", __func__);
+
+	return ret;
+}
+
+void tsens_disable_irq(struct tsens_priv *priv)
+{
+	regmap_field_write(priv->rf[INT_EN], 0);
+}
+
 int get_temp_tsens_valid(struct tsens_sensor *s, int *temp)
 {
 	struct tsens_priv *priv = s->priv;
@@ -187,7 +527,7 @@ static int dbg_version_show(struct seq_file *s, void *data)
 	u32 maj_ver, min_ver, step_ver;
 	int ret;
 
-	if (tsens_ver(priv) > VER_0_1) {
+	if (tsens_version(priv) > VER_0_1) {
 		ret = regmap_field_read(priv->rf[VER_MAJOR], &maj_ver);
 		if (ret)
 			return ret;
@@ -292,7 +632,7 @@ int __init init_common(struct tsens_priv *priv)
 		goto err_put_device;
 	}
 
-	if (tsens_ver(priv) > VER_0_1) {
+	if (tsens_version(priv) > VER_0_1) {
 		for (i = VER_MAJOR; i <= VER_STEP; i++) {
 			priv->rf[i] = devm_regmap_field_alloc(dev, priv->srot_map,
 							      priv->fields[i]);
@@ -322,24 +662,29 @@ int __init init_common(struct tsens_priv *priv)
 		ret = PTR_ERR(priv->rf[SENSOR_EN]);
 		goto err_put_device;
 	}
-	/* now alloc regmap_fields in tm_map */
-	for (i = 0, j = LAST_TEMP_0; i < priv->feat->max_sensors; i++, j++) {
-		priv->rf[j] = devm_regmap_field_alloc(dev, priv->tm_map,
-						      priv->fields[j]);
-		if (IS_ERR(priv->rf[j])) {
-			ret = PTR_ERR(priv->rf[j]);
-			goto err_put_device;
-		}
+	priv->rf[INT_EN] = devm_regmap_field_alloc(dev, priv->tm_map,
+						   priv->fields[INT_EN]);
+	if (IS_ERR(priv->rf[INT_EN])) {
+		ret = PTR_ERR(priv->rf[INT_EN]);
+		goto err_put_device;
 	}
-	for (i = 0, j = VALID_0; i < priv->feat->max_sensors; i++, j++) {
-		priv->rf[j] = devm_regmap_field_alloc(dev, priv->tm_map,
-						      priv->fields[j]);
-		if (IS_ERR(priv->rf[j])) {
-			ret = PTR_ERR(priv->rf[j]);
-			goto err_put_device;
+
+	/* This loop might need changes if enum regfield_ids is reordered */
+	for (j = LAST_TEMP_0; j <= UP_THRESH_15; j += 16) {
+		for (i = 0; i < priv->feat->max_sensors; i++) {
+			int idx = j + i;
+
+			priv->rf[idx] = devm_regmap_field_alloc(dev, priv->tm_map,
+								priv->fields[idx]);
+			if (IS_ERR(priv->rf[idx])) {
+				ret = PTR_ERR(priv->rf[idx]);
+				goto err_put_device;
+			}
 		}
 	}
 
+	spin_lock_init(&priv->ul_lock);
+	tsens_enable_irq(priv);
 	tsens_debug_init(op);
 
 	return 0;
diff --git a/drivers/thermal/qcom/tsens-v0_1.c b/drivers/thermal/qcom/tsens-v0_1.c
index 055647bcee67..4b8dd6de02ce 100644
--- a/drivers/thermal/qcom/tsens-v0_1.c
+++ b/drivers/thermal/qcom/tsens-v0_1.c
@@ -347,9 +347,20 @@ static const struct reg_field tsens_v0_1_regfields[MAX_REGFIELDS] = {
 	/* INTERRUPT ENABLE */
 	[INT_EN] = REG_FIELD(TM_INT_EN_OFF, 0, 0),
 
+	/* UPPER/LOWER TEMPERATURE THRESHOLDS */
+	REG_FIELD_FOR_EACH_SENSOR11(LOW_THRESH,    TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF,  0,  9),
+	REG_FIELD_FOR_EACH_SENSOR11(UP_THRESH,     TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 10, 19),
+
+	/* UPPER/LOWER INTERRUPTS [CLEAR/STATUS] */
+	REG_FIELD_FOR_EACH_SENSOR11(LOW_INT_CLEAR, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 20, 20),
+	REG_FIELD_FOR_EACH_SENSOR11(UP_INT_CLEAR,  TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 21, 21),
+
+	/* NO CRITICAL INTERRUPT SUPPORT on v0.1 */
+
 	/* Sn_STATUS */
 	REG_FIELD_FOR_EACH_SENSOR11(LAST_TEMP,    TM_Sn_STATUS_OFF,  0,  9),
 	/* No VALID field on v0.1 */
+	/* xxx_STATUS bits: 1 == threshold violated */
 	REG_FIELD_FOR_EACH_SENSOR11(MIN_STATUS,   TM_Sn_STATUS_OFF, 10, 10),
 	REG_FIELD_FOR_EACH_SENSOR11(LOWER_STATUS, TM_Sn_STATUS_OFF, 11, 11),
 	REG_FIELD_FOR_EACH_SENSOR11(UPPER_STATUS, TM_Sn_STATUS_OFF, 12, 12),
diff --git a/drivers/thermal/qcom/tsens-v1.c b/drivers/thermal/qcom/tsens-v1.c
index 870f502f2cb6..7d33a0c8cd3e 100644
--- a/drivers/thermal/qcom/tsens-v1.c
+++ b/drivers/thermal/qcom/tsens-v1.c
@@ -17,6 +17,8 @@
 #define TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF	0x0004
 #define TM_Sn_STATUS_OFF			0x0044
 #define TM_TRDY_OFF				0x0084
+#define TM_HIGH_LOW_INT_STATUS_OFF		0x0088
+#define TM_HIGH_LOW_Sn_INT_THRESHOLD_OFF	0x0090
 
 /* eeprom layout data for qcs404/405 (v1) */
 #define BASE0_MASK	0x000007f8
@@ -168,9 +170,36 @@ static const struct reg_field tsens_v1_regfields[MAX_REGFIELDS] = {
 	/* INTERRUPT ENABLE */
 	[INT_EN]     = REG_FIELD(TM_INT_EN_OFF, 0, 0),
 
+	/* UPPER/LOWER TEMPERATURE THRESHOLDS */
+	REG_FIELD_FOR_EACH_SENSOR11(LOW_THRESH,    TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF,  0,  9),
+	REG_FIELD_FOR_EACH_SENSOR11(UP_THRESH,     TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 10, 19),
+
+	/* UPPER/LOWER INTERRUPTS [CLEAR/STATUS] */
+	REG_FIELD_FOR_EACH_SENSOR11(LOW_INT_CLEAR, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 20, 20),
+	REG_FIELD_FOR_EACH_SENSOR11(UP_INT_CLEAR,  TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 21, 21),
+	[LOW_INT_STATUS_0] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF,  0,  0),
+	[LOW_INT_STATUS_1] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF,  1,  1),
+	[LOW_INT_STATUS_2] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF,  2,  2),
+	[LOW_INT_STATUS_3] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF,  3,  3),
+	[LOW_INT_STATUS_4] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF,  4,  4),
+	[LOW_INT_STATUS_5] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF,  5,  5),
+	[LOW_INT_STATUS_6] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF,  6,  6),
+	[LOW_INT_STATUS_7] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF,  7,  7),
+	[UP_INT_STATUS_0]  = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF,  8,  8),
+	[UP_INT_STATUS_1]  = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF,  9,  9),
+	[UP_INT_STATUS_2]  = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 10, 10),
+	[UP_INT_STATUS_3]  = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 11, 11),
+	[UP_INT_STATUS_4]  = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 12, 12),
+	[UP_INT_STATUS_5]  = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 13, 13),
+	[UP_INT_STATUS_6]  = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 14, 14),
+	[UP_INT_STATUS_7]  = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 15, 15),
+
+	/* NO CRITICAL INTERRUPT SUPPORT on v1 */
+
 	/* Sn_STATUS */
 	REG_FIELD_FOR_EACH_SENSOR11(LAST_TEMP,    TM_Sn_STATUS_OFF,  0,  9),
 	REG_FIELD_FOR_EACH_SENSOR11(VALID,        TM_Sn_STATUS_OFF, 14, 14),
+	/* xxx_STATUS bits: 1 == threshold violated */
 	REG_FIELD_FOR_EACH_SENSOR11(MIN_STATUS,   TM_Sn_STATUS_OFF, 10, 10),
 	REG_FIELD_FOR_EACH_SENSOR11(LOWER_STATUS, TM_Sn_STATUS_OFF, 11, 11),
 	REG_FIELD_FOR_EACH_SENSOR11(UPPER_STATUS, TM_Sn_STATUS_OFF, 12, 12),
diff --git a/drivers/thermal/qcom/tsens-v2.c b/drivers/thermal/qcom/tsens-v2.c
index 0a4f2b8fcab6..a4d15e1abfdd 100644
--- a/drivers/thermal/qcom/tsens-v2.c
+++ b/drivers/thermal/qcom/tsens-v2.c
@@ -50,9 +50,22 @@ static const struct reg_field tsens_v2_regfields[MAX_REGFIELDS] = {
 	/* v2 has separate enables for UPPER/LOWER/CRITICAL interrupts */
 	[INT_EN]  = REG_FIELD(TM_INT_EN_OFF, 0, 2),
 
+	/* TEMPERATURE THRESHOLDS */
+	REG_FIELD_FOR_EACH_SENSOR16(LOW_THRESH, TM_Sn_UPPER_LOWER_THRESHOLD_OFF,  0,  11),
+	REG_FIELD_FOR_EACH_SENSOR16(UP_THRESH,  TM_Sn_UPPER_LOWER_THRESHOLD_OFF, 12,  23),
+
+	/* INTERRUPTS [CLEAR/STATUS/MASK] */
+	REG_FIELD_SPLIT_BITS_0_15(LOW_INT_STATUS,  TM_UPPER_LOWER_INT_STATUS_OFF),
+	REG_FIELD_SPLIT_BITS_0_15(LOW_INT_CLEAR,   TM_UPPER_LOWER_INT_CLEAR_OFF),
+	REG_FIELD_SPLIT_BITS_0_15(LOW_INT_MASK,    TM_UPPER_LOWER_INT_MASK_OFF),
+	REG_FIELD_SPLIT_BITS_16_31(UP_INT_STATUS,  TM_UPPER_LOWER_INT_STATUS_OFF),
+	REG_FIELD_SPLIT_BITS_16_31(UP_INT_CLEAR,   TM_UPPER_LOWER_INT_CLEAR_OFF),
+	REG_FIELD_SPLIT_BITS_16_31(UP_INT_MASK,    TM_UPPER_LOWER_INT_MASK_OFF),
+
 	/* Sn_STATUS */
 	REG_FIELD_FOR_EACH_SENSOR16(LAST_TEMP,       TM_Sn_STATUS_OFF,  0,  11),
 	REG_FIELD_FOR_EACH_SENSOR16(VALID,           TM_Sn_STATUS_OFF, 21,  21),
+	/* xxx_STATUS bits: 1 == threshold violated */
 	REG_FIELD_FOR_EACH_SENSOR16(MIN_STATUS,      TM_Sn_STATUS_OFF, 16,  16),
 	REG_FIELD_FOR_EACH_SENSOR16(LOWER_STATUS,    TM_Sn_STATUS_OFF, 17,  17),
 	REG_FIELD_FOR_EACH_SENSOR16(UPPER_STATUS,    TM_Sn_STATUS_OFF, 18,  18),
diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index 772aa76b50e1..7d317660211e 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -7,6 +7,7 @@
 #include <linux/err.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/pm.h>
 #include <linux/slab.h>
@@ -78,12 +79,14 @@ MODULE_DEVICE_TABLE(of, tsens_table);
 static const struct thermal_zone_of_device_ops tsens_of_ops = {
 	.get_temp = tsens_get_temp,
 	.get_trend = tsens_get_trend,
+	.set_trips = tsens_set_trips,
 };
 
 static int tsens_register(struct tsens_priv *priv)
 {
-	int i;
+	int i, ret, irq;
 	struct thermal_zone_device *tzd;
+	struct platform_device *pdev;
 
 	for (i = 0;  i < priv->num_sensors; i++) {
 		priv->sensor[i].priv = priv;
@@ -96,7 +99,31 @@ static int tsens_register(struct tsens_priv *priv)
 		if (priv->ops->enable)
 			priv->ops->enable(priv, i);
 	}
-	return 0;
+
+	pdev = of_find_device_by_node(priv->dev->of_node);
+	if (!pdev)
+		return -ENODEV;
+
+	irq = platform_get_irq_byname(pdev, "uplow");
+	if (irq < 0) {
+		ret = irq;
+		goto err_put_device;
+	}
+
+	ret = devm_request_threaded_irq(&pdev->dev, irq,
+					NULL, tsens_irq_thread,
+					IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+					dev_name(&pdev->dev), priv);
+	if (ret) {
+		dev_err(&pdev->dev, "%s: failed to get irq\n", __func__);
+		goto err_put_device;
+	}
+
+	enable_irq_wake(irq);
+
+err_put_device:
+	put_device(&pdev->dev);
+	return ret;
 }
 
 static int tsens_probe(struct platform_device *pdev)
@@ -178,6 +205,7 @@ static int tsens_remove(struct platform_device *pdev)
 	struct tsens_priv *priv = platform_get_drvdata(pdev);
 
 	debugfs_remove_recursive(priv->debug_root);
+	tsens_disable_irq(priv);
 	if (priv->ops->disable)
 		priv->ops->disable(priv);
 
diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
index 00899c17e848..8b20f28c5c51 100644
--- a/drivers/thermal/qcom/tsens.h
+++ b/drivers/thermal/qcom/tsens.h
@@ -13,8 +13,10 @@
 #define CAL_DEGC_PT2		120
 #define SLOPE_FACTOR		1000
 #define SLOPE_DEFAULT		3200
+#define THRESHOLD_MAX_ADC_CODE	0x3ff
+#define THRESHOLD_MIN_ADC_CODE	0x0
 
-
+#include <linux/interrupt.h>
 #include <linux/thermal.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
@@ -27,6 +29,11 @@ enum tsens_ver {
 	VER_2_X,
 };
 
+enum tsens_irq_type {
+	LOWER,
+	UPPER,
+};
+
 /**
  * struct tsens_sensor - data for each sensor connected to the tsens device
  * @priv: tsens device instance that this sensor is connected to
@@ -100,22 +107,66 @@ struct tsens_ops {
 	[_name##_##14] = REG_FIELD(_offset + 56, _startbit, _stopbit), \
 	[_name##_##15] = REG_FIELD(_offset + 60, _startbit, _stopbit)
 
-/* reg_field IDs to use as an index into an array */
+#define REG_FIELD_SPLIT_BITS_0_15(_name, _offset)		\
+	[_name##_##0]  = REG_FIELD(_offset,  0,  0),		\
+	[_name##_##1]  = REG_FIELD(_offset,  1,  1),	\
+	[_name##_##2]  = REG_FIELD(_offset,  2,  2),	\
+	[_name##_##3]  = REG_FIELD(_offset,  3,  3),	\
+	[_name##_##4]  = REG_FIELD(_offset,  4,  4),	\
+	[_name##_##5]  = REG_FIELD(_offset,  5,  5),	\
+	[_name##_##6]  = REG_FIELD(_offset,  6,  6),	\
+	[_name##_##7]  = REG_FIELD(_offset,  7,  7),	\
+	[_name##_##8]  = REG_FIELD(_offset,  8,  8),	\
+	[_name##_##9]  = REG_FIELD(_offset,  9,  9),	\
+	[_name##_##10] = REG_FIELD(_offset, 10, 10),	\
+	[_name##_##11] = REG_FIELD(_offset, 11, 11),	\
+	[_name##_##12] = REG_FIELD(_offset, 12, 12),	\
+	[_name##_##13] = REG_FIELD(_offset, 13, 13),	\
+	[_name##_##14] = REG_FIELD(_offset, 14, 14),	\
+	[_name##_##15] = REG_FIELD(_offset, 15, 15)
+
+#define REG_FIELD_SPLIT_BITS_16_31(_name, _offset)		\
+	[_name##_##0]  = REG_FIELD(_offset, 16, 16),		\
+	[_name##_##1]  = REG_FIELD(_offset, 17, 17),	\
+	[_name##_##2]  = REG_FIELD(_offset, 18, 18),	\
+	[_name##_##3]  = REG_FIELD(_offset, 19, 19),	\
+	[_name##_##4]  = REG_FIELD(_offset, 20, 20),	\
+	[_name##_##5]  = REG_FIELD(_offset, 21, 21),	\
+	[_name##_##6]  = REG_FIELD(_offset, 22, 22),	\
+	[_name##_##7]  = REG_FIELD(_offset, 23, 23),	\
+	[_name##_##8]  = REG_FIELD(_offset, 24, 24),	\
+	[_name##_##9]  = REG_FIELD(_offset, 25, 25),	\
+	[_name##_##10] = REG_FIELD(_offset, 26, 26),	\
+	[_name##_##11] = REG_FIELD(_offset, 27, 27),	\
+	[_name##_##12] = REG_FIELD(_offset, 28, 28),	\
+	[_name##_##13] = REG_FIELD(_offset, 29, 29),	\
+	[_name##_##14] = REG_FIELD(_offset, 30, 30),	\
+	[_name##_##15] = REG_FIELD(_offset, 31, 31)
+
+/*
+ * reg_field IDs to use as an index into an array
+ * If you change the order of the entries, check the devm_regmap_field_alloc()
+ * calls in init_common()
+ */
 enum regfield_ids {
 	/* ----- SROT ------ */
 	/* HW_VER */
-	VER_MAJOR = 0,
+	VER_MAJOR,
 	VER_MINOR,
 	VER_STEP,
 	/* CTRL_OFFSET */
-	TSENS_EN =  3,
+	TSENS_EN,
 	TSENS_SW_RST,
 	SENSOR_EN,
 	CODE_OR_TEMP,
 
 	/* ----- TM ------ */
+	/* TRDY */
+	TRDY,
+	/* INTERRUPT ENABLE */
+	INT_EN,	/* v2+ has separate enables for crit, upper and lower irq */
 	/* STATUS */
-	LAST_TEMP_0 = 7,	/* Last temperature reading */
+	LAST_TEMP_0,	/* Last temperature reading */
 	LAST_TEMP_1,
 	LAST_TEMP_2,
 	LAST_TEMP_3,
@@ -131,7 +182,7 @@ enum regfield_ids {
 	LAST_TEMP_13,
 	LAST_TEMP_14,
 	LAST_TEMP_15,
-	VALID_0 = 23,		/* VALID reading or not */
+	VALID_0,		/* VALID reading or not */
 	VALID_1,
 	VALID_2,
 	VALID_3,
@@ -147,38 +198,6 @@ enum regfield_ids {
 	VALID_13,
 	VALID_14,
 	VALID_15,
-	MIN_STATUS_0,		/* MIN threshold violated */
-	MIN_STATUS_1,
-	MIN_STATUS_2,
-	MIN_STATUS_3,
-	MIN_STATUS_4,
-	MIN_STATUS_5,
-	MIN_STATUS_6,
-	MIN_STATUS_7,
-	MIN_STATUS_8,
-	MIN_STATUS_9,
-	MIN_STATUS_10,
-	MIN_STATUS_11,
-	MIN_STATUS_12,
-	MIN_STATUS_13,
-	MIN_STATUS_14,
-	MIN_STATUS_15,
-	MAX_STATUS_0,		/* MAX threshold violated */
-	MAX_STATUS_1,
-	MAX_STATUS_2,
-	MAX_STATUS_3,
-	MAX_STATUS_4,
-	MAX_STATUS_5,
-	MAX_STATUS_6,
-	MAX_STATUS_7,
-	MAX_STATUS_8,
-	MAX_STATUS_9,
-	MAX_STATUS_10,
-	MAX_STATUS_11,
-	MAX_STATUS_12,
-	MAX_STATUS_13,
-	MAX_STATUS_14,
-	MAX_STATUS_15,
 	LOWER_STATUS_0,	/* LOWER threshold violated */
 	LOWER_STATUS_1,
 	LOWER_STATUS_2,
@@ -195,6 +214,70 @@ enum regfield_ids {
 	LOWER_STATUS_13,
 	LOWER_STATUS_14,
 	LOWER_STATUS_15,
+	LOW_INT_STATUS_0,	/* LOWER interrupt status */
+	LOW_INT_STATUS_1,
+	LOW_INT_STATUS_2,
+	LOW_INT_STATUS_3,
+	LOW_INT_STATUS_4,
+	LOW_INT_STATUS_5,
+	LOW_INT_STATUS_6,
+	LOW_INT_STATUS_7,
+	LOW_INT_STATUS_8,
+	LOW_INT_STATUS_9,
+	LOW_INT_STATUS_10,
+	LOW_INT_STATUS_11,
+	LOW_INT_STATUS_12,
+	LOW_INT_STATUS_13,
+	LOW_INT_STATUS_14,
+	LOW_INT_STATUS_15,
+	LOW_INT_CLEAR_0,	/* LOWER interrupt clear */
+	LOW_INT_CLEAR_1,
+	LOW_INT_CLEAR_2,
+	LOW_INT_CLEAR_3,
+	LOW_INT_CLEAR_4,
+	LOW_INT_CLEAR_5,
+	LOW_INT_CLEAR_6,
+	LOW_INT_CLEAR_7,
+	LOW_INT_CLEAR_8,
+	LOW_INT_CLEAR_9,
+	LOW_INT_CLEAR_10,
+	LOW_INT_CLEAR_11,
+	LOW_INT_CLEAR_12,
+	LOW_INT_CLEAR_13,
+	LOW_INT_CLEAR_14,
+	LOW_INT_CLEAR_15,
+	LOW_INT_MASK_0,	/* LOWER interrupt mask */
+	LOW_INT_MASK_1,
+	LOW_INT_MASK_2,
+	LOW_INT_MASK_3,
+	LOW_INT_MASK_4,
+	LOW_INT_MASK_5,
+	LOW_INT_MASK_6,
+	LOW_INT_MASK_7,
+	LOW_INT_MASK_8,
+	LOW_INT_MASK_9,
+	LOW_INT_MASK_10,
+	LOW_INT_MASK_11,
+	LOW_INT_MASK_12,
+	LOW_INT_MASK_13,
+	LOW_INT_MASK_14,
+	LOW_INT_MASK_15,
+	LOW_THRESH_0,		/* LOWER threshold values */
+	LOW_THRESH_1,
+	LOW_THRESH_2,
+	LOW_THRESH_3,
+	LOW_THRESH_4,
+	LOW_THRESH_5,
+	LOW_THRESH_6,
+	LOW_THRESH_7,
+	LOW_THRESH_8,
+	LOW_THRESH_9,
+	LOW_THRESH_10,
+	LOW_THRESH_11,
+	LOW_THRESH_12,
+	LOW_THRESH_13,
+	LOW_THRESH_14,
+	LOW_THRESH_15,
 	UPPER_STATUS_0,	/* UPPER threshold violated */
 	UPPER_STATUS_1,
 	UPPER_STATUS_2,
@@ -211,6 +294,70 @@ enum regfield_ids {
 	UPPER_STATUS_13,
 	UPPER_STATUS_14,
 	UPPER_STATUS_15,
+	UP_INT_STATUS_0,	/* UPPER interrupt status */
+	UP_INT_STATUS_1,
+	UP_INT_STATUS_2,
+	UP_INT_STATUS_3,
+	UP_INT_STATUS_4,
+	UP_INT_STATUS_5,
+	UP_INT_STATUS_6,
+	UP_INT_STATUS_7,
+	UP_INT_STATUS_8,
+	UP_INT_STATUS_9,
+	UP_INT_STATUS_10,
+	UP_INT_STATUS_11,
+	UP_INT_STATUS_12,
+	UP_INT_STATUS_13,
+	UP_INT_STATUS_14,
+	UP_INT_STATUS_15,
+	UP_INT_CLEAR_0,	/* UPPER interrupt clear */
+	UP_INT_CLEAR_1,
+	UP_INT_CLEAR_2,
+	UP_INT_CLEAR_3,
+	UP_INT_CLEAR_4,
+	UP_INT_CLEAR_5,
+	UP_INT_CLEAR_6,
+	UP_INT_CLEAR_7,
+	UP_INT_CLEAR_8,
+	UP_INT_CLEAR_9,
+	UP_INT_CLEAR_10,
+	UP_INT_CLEAR_11,
+	UP_INT_CLEAR_12,
+	UP_INT_CLEAR_13,
+	UP_INT_CLEAR_14,
+	UP_INT_CLEAR_15,
+	UP_INT_MASK_0,		/* UPPER interrupt mask */
+	UP_INT_MASK_1,
+	UP_INT_MASK_2,
+	UP_INT_MASK_3,
+	UP_INT_MASK_4,
+	UP_INT_MASK_5,
+	UP_INT_MASK_6,
+	UP_INT_MASK_7,
+	UP_INT_MASK_8,
+	UP_INT_MASK_9,
+	UP_INT_MASK_10,
+	UP_INT_MASK_11,
+	UP_INT_MASK_12,
+	UP_INT_MASK_13,
+	UP_INT_MASK_14,
+	UP_INT_MASK_15,
+	UP_THRESH_0,		/* UPPER threshold values */
+	UP_THRESH_1,
+	UP_THRESH_2,
+	UP_THRESH_3,
+	UP_THRESH_4,
+	UP_THRESH_5,
+	UP_THRESH_6,
+	UP_THRESH_7,
+	UP_THRESH_8,
+	UP_THRESH_9,
+	UP_THRESH_10,
+	UP_THRESH_11,
+	UP_THRESH_12,
+	UP_THRESH_13,
+	UP_THRESH_14,
+	UP_THRESH_15,
 	CRITICAL_STATUS_0,	/* CRITICAL threshold violated */
 	CRITICAL_STATUS_1,
 	CRITICAL_STATUS_2,
@@ -227,13 +374,38 @@ enum regfield_ids {
 	CRITICAL_STATUS_13,
 	CRITICAL_STATUS_14,
 	CRITICAL_STATUS_15,
-	/* TRDY */
-	TRDY,
-	/* INTERRUPT ENABLE */
-	INT_EN,	/* Pre-V1, V1.x */
-	LOW_INT_EN,	/* V2.x */
-	UP_INT_EN,	/* V2.x */
-	CRIT_INT_EN,	/* V2.x */
+	MIN_STATUS_0,		/* MIN threshold violated */
+	MIN_STATUS_1,
+	MIN_STATUS_2,
+	MIN_STATUS_3,
+	MIN_STATUS_4,
+	MIN_STATUS_5,
+	MIN_STATUS_6,
+	MIN_STATUS_7,
+	MIN_STATUS_8,
+	MIN_STATUS_9,
+	MIN_STATUS_10,
+	MIN_STATUS_11,
+	MIN_STATUS_12,
+	MIN_STATUS_13,
+	MIN_STATUS_14,
+	MIN_STATUS_15,
+	MAX_STATUS_0,		/* MAX threshold violated */
+	MAX_STATUS_1,
+	MAX_STATUS_2,
+	MAX_STATUS_3,
+	MAX_STATUS_4,
+	MAX_STATUS_5,
+	MAX_STATUS_6,
+	MAX_STATUS_7,
+	MAX_STATUS_8,
+	MAX_STATUS_9,
+	MAX_STATUS_10,
+	MAX_STATUS_11,
+	MAX_STATUS_12,
+	MAX_STATUS_13,
+	MAX_STATUS_14,
+	MAX_STATUS_15,
 
 	/* Keep last */
 	MAX_REGFIELDS
@@ -303,6 +475,10 @@ struct tsens_priv {
 	struct regmap			*tm_map;
 	struct regmap			*srot_map;
 	u32				tm_offset;
+
+	/* lock for upper/lower threshold interrupts */
+	spinlock_t			ul_lock;
+
 	struct regmap_field		*rf[MAX_REGFIELDS];
 	struct tsens_context		ctx;
 	const struct tsens_features	*feat;
@@ -320,6 +496,10 @@ void compute_intercept_slope(struct tsens_priv *priv, u32 *pt1, u32 *pt2, u32 mo
 int init_common(struct tsens_priv *priv);
 int get_temp_tsens_valid(struct tsens_sensor *s, int *temp);
 int get_temp_common(struct tsens_sensor *s, int *temp);
+int tsens_enable_irq(struct tsens_priv *priv);
+void tsens_disable_irq(struct tsens_priv *priv);
+int tsens_set_trips(void *_sensor, int low, int high);
+irqreturn_t tsens_irq_thread(int irq, void *data);
 
 /* TSENS target */
 extern const struct tsens_plat_data data_8960;
-- 
2.17.1

Re: [PATCH v7 03/15] drivers: thermal: tsens: Add __func__ identifier to debug statements

[Doug Anderson]

Hi,

On Thu, Oct 31, 2019 at 11:38 AM Amit Kucheria <amit.kucheria@linaro.org> wrote:
>
> Printing the function name when enabling debugging makes logs easier to
> read.
>
> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
> Reviewed-by: Stephen Boyd <swboyd@chromium.org>
> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
> ---
>  drivers/thermal/qcom/tsens-common.c | 8 ++++----
>  drivers/thermal/qcom/tsens.c        | 6 +++---
>  2 files changed, 7 insertions(+), 7 deletions(-)

Obviously my opinion doesn't trump maintainers ones, but I have always
heard that this is the wrong thing to do for "dev_xxx" debug
statements.  Specifically:

* For "dev_xxx" statements, the device name is already printed which
is pretty good for getting you to the right driver.

* Once you're in the right driver, error messages should be unique
enough to find the right function.

If having __func__ in all messages was beneficial then the "dev_xxx"
macros would include it by default.  They don't and such things just
uglify the logs and chew up log space.  I suppose you could try
including a CONFIG option to add it to all "dev_xxx" functions and see
if it would be accepted?  Then you can turn it on locally.

Using __func__ in cases where you don't happen to have a "struct
device" (and can't get one easily) makes some sense, but otherwise I
believe it should be kept out.

-Doug