From: Oliver Neukum <oneukum@suse.de>
To: Kurachkin Michail <Michail.Kurachkin@promwad.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
Kuten Ivan <Ivan.Kuten@promwad.com>,
"benavi@marvell.com" <benavi@marvell.com>,
Palstsiuk Viktar <Viktar.Palstsiuk@promwad.com>
Subject: Re: TDM bus support in Linux Kernel [PATCH]
Date: Wed, 30 Jan 2013 14:03:50 +0100 [thread overview]
Message-ID: <3071962.fRDCyxVGjS@linux-5eaq.site> (raw)
In-Reply-To: <F7F628C32E67B04DAECC5CA53521253E5FAB15CE@sv-exmb01-lo1.promwad.corp>
On Wednesday 30 January 2013 12:37:25 Kurachkin Michail wrote:
> Hi Greg,
>
> I followed your recommendations and created a diff using Linux 3.8-rc5 sources. Please review it and give your comments.
Part #2
+/**
+ * slic controls over ioctl
+ * @param slic - slic descriptor
+ * @param cmd - command
+ * @param arg - argument
+ * @return 0 - ok
+ */
+int slic_control(struct si3226x_slic *slic, unsigned int cmd, unsigned long arg)
+{
+ int rc;
+ struct si3226x_line *line = slic->lines;
+ int i;
+
+ switch(cmd) {
+ case SI3226X_SET_COMPANDING_MODE:
+ if( arg != SI_ALAW && arg != SI_MLAW)
+ return -EINVAL;
+
+ for (i = 0; i < SI3226X_MAX_CHANNELS; i++, line++) {
+ if (line->state == SI_LINE_DISABLE)
+ continue;
+
+ line->companding_mode = arg;
+
+ rc = slic_setup_audio(line);
+ if (rc)
+ return rc;
This interface is not well thought out. If you get an error, the command
has been partially executed, but you have no idea how far.
+ }
+ break;
+
+ case SI3226X_SET_CALLERID_MODE:
+ if( arg != SI_FSK_BELLCORE && arg != SI_FSK_ETSI
+ && arg != SI_CALLERID_DTMF)
+ return -EINVAL;
+
+ for (i = 0; i < SI3226X_MAX_CHANNELS; i++, line++) {
+ if (line->state == SI_LINE_DISABLE)
+ continue;
+
+ line->callerid_mode = arg;
+ }
+ break;
+ }
+
+ return 0;
+}
+/**
+ * slic line controls over ioctl
+ * @param line - line descriptor
+ * @param cmd - command
+ * @param arg - argument
+ * @return 0 - ok
+ */
+int line_control(struct si3226x_line *line, unsigned int cmd, unsigned long arg)
+{
+ int rc = 0;
+ u8 data;
+ struct si3226x_caller_id caller_id;
+ u8 callerid_buffer[CALLERID_BUF_SIZE];
+
+ switch(cmd) {
+ case SI3226X_SET_CALLERID_MODE:
+ if( arg != SI_FSK_BELLCORE && arg != SI_FSK_ETSI
+ && arg != SI_CALLERID_DTMF && arg != SI_CALLERID_NONE)
+ return -EINVAL;
+
+ line->callerid_mode = arg;
+ break;
+
+ case SI3226X_SET_ECHO_CANCELATION:
+ if(arg)
+ rc = slic_enable_echo(line);
+ else
+ rc = slic_disable_echo(line);
+ break;
+
+ case SI3226X_SET_LINE_STATE:
+ rc = slic_set_line_state(line, arg);
+ break;
+
+ case SI3226X_CALL:
+ copy_from_user(&caller_id, (__u8 __user *)arg, sizeof caller_id);
must handle errors
+
+ if(caller_id.size > CALLERID_BUF_SIZE)
+ caller_id.size = CALLERID_BUF_SIZE;
+
+ copy_from_user(callerid_buffer, (__u8 __user *)caller_id.data, caller_id.size);
must handle errors
+ rc = slic_line_call(line, callerid_buffer, caller_id.size);
+ break;
+
+ case SI3226X_SEND_DTMF:
+ rc = slic_send_dtmf_digit(line, arg);
+ break;
+
+ case SI3226X_GET_HOOK_STATE:
+ __put_user(line->hook_state, (__u8 __user *)arg);
must handle errors
+ break;
+
+ case SI3226X_GET_DTMF_DIGIT:
+ rc = fifo_pop(&line->dtmf, &data);
+ if (rc)
+ return -ENODATA;
+
+ __put_user(data, (__u8 __user *)arg);
must handle errors
+ break;
+
+ case SI3226X_GET_AUDIO_BLOCK_SIZE:
+ __put_user(line->audio_buffer_size, (__u8 __user *)arg);
must handle errors
+ break;
+
+ case SI3226X_SET_COMPANDING_MODE:
+ if( arg != SI_ALAW && arg != SI_MLAW)
+ return -EINVAL;
+
+ line->companding_mode = arg;
+
+ rc = slic_setup_audio(line);
+ if (rc)
+ return rc;
a bit pointless
+
+ break;
+
+ case SI3226X_ENABLE_AUDIO:
+ if (line->tdm_dev == NULL)
+ return -ENODEV;
+
+ /* TODO: workaround to fix sound distortion after asterisk restart */
+ if (!line->audio_start_flag) {
+ rc = tdm_run_audio(line->tdm_dev);
+ if (!rc)
+ line->audio_start_flag = 1;
+ }
+
+ break;
+
+ case SI3226X_DISABLE_AUDIO:
+ if (line->tdm_dev == NULL)
+ return -ENODEV;
+
+ rc = tdm_stop_audio(line->tdm_dev);
+ break;
+ }
+
+ return rc;
+}
next prev parent reply other threads:[~2013-01-30 13:03 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-30 12:37 TDM bus support in Linux Kernel [PATCH] Kurachkin Michail
2013-01-30 12:59 ` Oliver Neukum
2013-02-04 13:08 ` Re[2]: " Michail Kurachkin
2013-02-05 15:34 ` Oliver Neukum
2013-02-13 17:08 ` Re[2]: " Michail Kurachkin
2013-02-14 12:46 ` Ivan Kuten
2013-01-30 13:03 ` Oliver Neukum [this message]
2013-01-30 13:28 ` Oliver Neukum
2013-01-30 13:35 ` Oliver Neukum
2013-01-30 13:43 ` Oliver Neukum
2013-01-30 15:57 ` Greg Kroah-Hartman
[not found] ` <511044C9.9090809@gmail.com>
2013-02-04 23:49 ` Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3071962.fRDCyxVGjS@linux-5eaq.site \
--to=oneukum@suse.de \
--cc=Ivan.Kuten@promwad.com \
--cc=Michail.Kurachkin@promwad.com \
--cc=Viktar.Palstsiuk@promwad.com \
--cc=benavi@marvell.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).