LKML Archive on lore.kernel.org
 help / color / Atom feed
From: Viresh Kumar <viresh.kumar@linaro.org>
To: stable@vger.kernel.org, Viresh Kumar <vireshk@kernel.org>,
	Nishanth Menon <nm@ti.com>, Stephen Boyd <sboyd@kernel.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>,
	Rajendra Nayak <rnayak@codeaurora.org>,
	Sajida Bhanu <sbhanu@codeaurora.org>,
	Sibi Sankar <sibis@codeaurora.org>,
	Matthias Kaehlcke <mka@chromium.org>,
	linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH - stable v5.4 and v5.7] opp: Enable resources again if they were disabled earlier
Date: Mon, 24 Aug 2020 14:52:23 +0530
Message-ID: <31f315cf2b0c4afd60b07b7121058dcaa6e4afa1.1598260882.git.viresh.kumar@linaro.org> (raw)

From: Rajendra Nayak <rnayak@codeaurora.org>

commit a4501bac0e553bed117b7e1b166d49731caf7260 upstream.

dev_pm_opp_set_rate() can now be called with freq = 0 in order
to either drop performance or bandwidth votes or to disable
regulators on platforms which support them.

In such cases, a subsequent call to dev_pm_opp_set_rate() with
the same frequency ends up returning early because 'old_freq == freq'

Instead make it fall through and put back the dropped performance
and bandwidth votes and/or enable back the regulators.

Cc: v5.3+ <stable@vger.kernel.org> # v5.3+
Fixes: cd7ea582866f ("opp: Make dev_pm_opp_set_rate() handle freq = 0 to drop performance votes")
Reported-by: Sajida Bhanu <sbhanu@codeaurora.org>
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Reported-by: Matthias Kaehlcke <mka@chromium.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
[ Viresh: Don't skip clk_set_rate() and massaged changelog ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
[ Viresh: Updated the patch to apply to v5.4 ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/opp/core.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/opp/core.c b/drivers/opp/core.c
index 9ff0538ee83a..518442be638d 100644
--- a/drivers/opp/core.c
+++ b/drivers/opp/core.c
@@ -843,10 +843,12 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
 
 	/* Return early if nothing to do */
 	if (old_freq == freq) {
-		dev_dbg(dev, "%s: old/new frequencies (%lu Hz) are same, nothing to do\n",
-			__func__, freq);
-		ret = 0;
-		goto put_opp_table;
+		if (!opp_table->required_opp_tables) {
+			dev_dbg(dev, "%s: old/new frequencies (%lu Hz) are same, nothing to do\n",
+				__func__, freq);
+			ret = 0;
+			goto put_opp_table;
+		}
 	}
 
 	temp_freq = old_freq;
-- 
2.25.0.rc1.19.g042ed3e048af


             reply index

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-24  9:22 Viresh Kumar [this message]
2020-08-24 16:10 ` Greg KH
2020-08-25  4:25   ` Viresh Kumar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=31f315cf2b0c4afd60b07b7121058dcaa6e4afa1.1598260882.git.viresh.kumar@linaro.org \
    --to=viresh.kumar@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=mka@chromium.org \
    --cc=nm@ti.com \
    --cc=rnayak@codeaurora.org \
    --cc=sbhanu@codeaurora.org \
    --cc=sboyd@kernel.org \
    --cc=sibis@codeaurora.org \
    --cc=stable@vger.kernel.org \
    --cc=vireshk@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git
	git clone --mirror https://lore.kernel.org/lkml/9 lkml/git/9.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git