Re: [PATCH 1/3] arm64: dts: rockchip: enable otg/drd operation of usb_host0_xhci in rk356x

[Heiko Stuebner <heiko@sntech.de>]

Am Donnerstag, 28. April 2022, 15:24:09 CEST schrieb Michael Riesch:
> Hi Nicolas,
> 
> On 4/28/22 13:15, Nicolas Frattaroli wrote:
> > On Montag, 25. April 2022 15:35:00 CEST Michael Riesch wrote:
> >> This USB 3.0 controller is capable of OTG/DRD operation. Enable it in the
> >> device tree.
> >>
> >> Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
> >> ---
> >>  arch/arm64/boot/dts/rockchip/rk356x.dtsi | 2 +-
> >>  1 file changed, 1 insertion(+), 1 deletion(-)
> >>
> >> diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> >> index 55e6dcb948cc..f611aaf2d238 100644
> >> --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> >> +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> >> @@ -266,7 +266,7 @@ usb_host0_xhci: usb@fcc00000 {
> >>  			 <&cru ACLK_USB3OTG0>;
> >>  		clock-names = "ref_clk", "suspend_clk",
> >>  			      "bus_clk";
> >> -		dr_mode = "host";
> >> +		dr_mode = "otg";
> >>  		phy_type = "utmi_wide";
> >>  		power-domains = <&power RK3568_PD_PIPE>;
> >>  		resets = <&cru SRST_USB3OTG0>;
> >>
> > 
> > Hi Michael,
> > 
> > according to official specs[1], only the RK3568 is capable of using the
> > USB 3.0 controller in OTG mode. For the RK3566, OTG is USB 2.0, if I
> > understand this correctly.
> > 
> > So I think this should be an override in rk3568.dtsi.
> 
> Thanks for pointing that out -- will change in v2 (I'll wait a bit,
> though, as I hope that patches 2 and 3 will be applied as they are ;-)

that can be arranged ;-)

Heiko