[PATCH v2 2/6] selftests: move prctl tests from Documentation/prctl

[Shuah Khan <shuahkh@osg.samsung.com>]

Move prctl tests from Documentation/prctl to selftests/prctl.

Remove prctl from Makefile to move the test. Update prctl Makefile to work
under selftests. prctl will not be run as part of selftests suite and will
not be included in install targets. They can be built separately for now.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
---
 Documentation/Makefile                             |  2 +-
 Documentation/prctl/.gitignore                     |  3 -
 Documentation/prctl/Makefile                       | 10 ---
 .../prctl/disable-tsc-ctxt-sw-stress-test.c        | 97 ----------------------
 .../prctl/disable-tsc-on-off-stress-test.c         | 96 ---------------------
 Documentation/prctl/disable-tsc-test.c             | 95 ---------------------
 tools/testing/selftests/prctl/.gitignore           |  3 +
 tools/testing/selftests/prctl/Makefile             | 15 ++++
 .../prctl/disable-tsc-ctxt-sw-stress-test.c        | 97 ++++++++++++++++++++++
 .../prctl/disable-tsc-on-off-stress-test.c         | 96 +++++++++++++++++++++
 tools/testing/selftests/prctl/disable-tsc-test.c   | 95 +++++++++++++++++++++
 11 files changed, 307 insertions(+), 302 deletions(-)
 delete mode 100644 Documentation/prctl/.gitignore
 delete mode 100644 Documentation/prctl/Makefile
 delete mode 100644 Documentation/prctl/disable-tsc-ctxt-sw-stress-test.c
 delete mode 100644 Documentation/prctl/disable-tsc-on-off-stress-test.c
 delete mode 100644 Documentation/prctl/disable-tsc-test.c
 create mode 100644 tools/testing/selftests/prctl/.gitignore
 create mode 100644 tools/testing/selftests/prctl/Makefile
 create mode 100644 tools/testing/selftests/prctl/disable-tsc-ctxt-sw-stress-test.c
 create mode 100644 tools/testing/selftests/prctl/disable-tsc-on-off-stress-test.c
 create mode 100644 tools/testing/selftests/prctl/disable-tsc-test.c

diff --git a/Documentation/Makefile b/Documentation/Makefile
index 0473710..7a28f6c 100644
--- a/Documentation/Makefile
+++ b/Documentation/Makefile
@@ -1,3 +1,3 @@
 subdir-y := accounting auxdisplay blackfin \
 	ia64 laptops mic misc-devices \
-	networking pcmcia prctl ptp timers vDSO watchdog
+	networking pcmcia ptp timers vDSO watchdog
diff --git a/Documentation/prctl/.gitignore b/Documentation/prctl/.gitignore
deleted file mode 100644
index 0b5c274..0000000
--- a/Documentation/prctl/.gitignore
+++ /dev/null
@@ -1,3 +0,0 @@
-disable-tsc-ctxt-sw-stress-test
-disable-tsc-on-off-stress-test
-disable-tsc-test
diff --git a/Documentation/prctl/Makefile b/Documentation/prctl/Makefile
deleted file mode 100644
index 44de308..0000000
--- a/Documentation/prctl/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-ifndef CROSS_COMPILE
-# List of programs to build
-hostprogs-$(CONFIG_X86) := disable-tsc-ctxt-sw-stress-test disable-tsc-on-off-stress-test disable-tsc-test
-# Tell kbuild to always build the programs
-always := $(hostprogs-y)
-
-HOSTCFLAGS_disable-tsc-ctxt-sw-stress-test.o += -I$(objtree)/usr/include
-HOSTCFLAGS_disable-tsc-on-off-stress-test.o += -I$(objtree)/usr/include
-HOSTCFLAGS_disable-tsc-test.o += -I$(objtree)/usr/include
-endif
diff --git a/Documentation/prctl/disable-tsc-ctxt-sw-stress-test.c b/Documentation/prctl/disable-tsc-ctxt-sw-stress-test.c
deleted file mode 100644
index f7499d1..0000000
--- a/Documentation/prctl/disable-tsc-ctxt-sw-stress-test.c
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * Tests for prctl(PR_GET_TSC, ...) / prctl(PR_SET_TSC, ...)
- *
- * Tests if the control register is updated correctly
- * at context switches
- *
- * Warning: this test will cause a very high load for a few seconds
- *
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <signal.h>
-#include <inttypes.h>
-#include <wait.h>
-
-
-#include <sys/prctl.h>
-#include <linux/prctl.h>
-
-/* Get/set the process' ability to use the timestamp counter instruction */
-#ifndef PR_GET_TSC
-#define PR_GET_TSC 25
-#define PR_SET_TSC 26
-# define PR_TSC_ENABLE		1   /* allow the use of the timestamp counter */
-# define PR_TSC_SIGSEGV		2   /* throw a SIGSEGV instead of reading the TSC */
-#endif
-
-static uint64_t rdtsc(void)
-{
-uint32_t lo, hi;
-/* We cannot use "=A", since this would use %rax on x86_64 */
-__asm__ __volatile__ ("rdtsc" : "=a" (lo), "=d" (hi));
-return (uint64_t)hi << 32 | lo;
-}
-
-static void sigsegv_expect(int sig)
-{
-	/* */
-}
-
-static void segvtask(void)
-{
-	if (prctl(PR_SET_TSC, PR_TSC_SIGSEGV) < 0)
-	{
-		perror("prctl");
-		exit(0);
-	}
-	signal(SIGSEGV, sigsegv_expect);
-	alarm(10);
-	rdtsc();
-	fprintf(stderr, "FATAL ERROR, rdtsc() succeeded while disabled\n");
-	exit(0);
-}
-
-
-static void sigsegv_fail(int sig)
-{
-	fprintf(stderr, "FATAL ERROR, rdtsc() failed while enabled\n");
-	exit(0);
-}
-
-static void rdtsctask(void)
-{
-	if (prctl(PR_SET_TSC, PR_TSC_ENABLE) < 0)
-	{
-		perror("prctl");
-		exit(0);
-	}
-	signal(SIGSEGV, sigsegv_fail);
-	alarm(10);
-	for(;;) rdtsc();
-}
-
-
-int main(void)
-{
-	int n_tasks = 100, i;
-
-	fprintf(stderr, "[No further output means we're allright]\n");
-
-	for (i=0; i<n_tasks; i++)
-		if (fork() == 0)
-		{
-			if (i & 1)
-				segvtask();
-			else
-				rdtsctask();
-		}
-
-	for (i=0; i<n_tasks; i++)
-		wait(NULL);
-
-	exit(0);
-}
-
diff --git a/Documentation/prctl/disable-tsc-on-off-stress-test.c b/Documentation/prctl/disable-tsc-on-off-stress-test.c
deleted file mode 100644
index a06f027..0000000
--- a/Documentation/prctl/disable-tsc-on-off-stress-test.c
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * Tests for prctl(PR_GET_TSC, ...) / prctl(PR_SET_TSC, ...)
- *
- * Tests if the control register is updated correctly
- * when set with prctl()
- *
- * Warning: this test will cause a very high load for a few seconds
- *
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <signal.h>
-#include <inttypes.h>
-#include <wait.h>
-
-
-#include <sys/prctl.h>
-#include <linux/prctl.h>
-
-/* Get/set the process' ability to use the timestamp counter instruction */
-#ifndef PR_GET_TSC
-#define PR_GET_TSC 25
-#define PR_SET_TSC 26
-# define PR_TSC_ENABLE		1   /* allow the use of the timestamp counter */
-# define PR_TSC_SIGSEGV		2   /* throw a SIGSEGV instead of reading the TSC */
-#endif
-
-/* snippet from wikipedia :-) */
-
-static uint64_t rdtsc(void)
-{
-uint32_t lo, hi;
-/* We cannot use "=A", since this would use %rax on x86_64 */
-__asm__ __volatile__ ("rdtsc" : "=a" (lo), "=d" (hi));
-return (uint64_t)hi << 32 | lo;
-}
-
-int should_segv = 0;
-
-static void sigsegv_cb(int sig)
-{
-	if (!should_segv)
-	{
-		fprintf(stderr, "FATAL ERROR, rdtsc() failed while enabled\n");
-		exit(0);
-	}
-	if (prctl(PR_SET_TSC, PR_TSC_ENABLE) < 0)
-	{
-		perror("prctl");
-		exit(0);
-	}
-	should_segv = 0;
-
-	rdtsc();
-}
-
-static void task(void)
-{
-	signal(SIGSEGV, sigsegv_cb);
-	alarm(10);
-	for(;;)
-	{
-		rdtsc();
-		if (should_segv)
-		{
-			fprintf(stderr, "FATAL ERROR, rdtsc() succeeded while disabled\n");
-			exit(0);
-		}
-		if (prctl(PR_SET_TSC, PR_TSC_SIGSEGV) < 0)
-		{
-			perror("prctl");
-			exit(0);
-		}
-		should_segv = 1;
-	}
-}
-
-
-int main(void)
-{
-	int n_tasks = 100, i;
-
-	fprintf(stderr, "[No further output means we're allright]\n");
-
-	for (i=0; i<n_tasks; i++)
-		if (fork() == 0)
-			task();
-
-	for (i=0; i<n_tasks; i++)
-		wait(NULL);
-
-	exit(0);
-}
-
diff --git a/Documentation/prctl/disable-tsc-test.c b/Documentation/prctl/disable-tsc-test.c
deleted file mode 100644
index 8d494f7..0000000
--- a/Documentation/prctl/disable-tsc-test.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * Tests for prctl(PR_GET_TSC, ...) / prctl(PR_SET_TSC, ...)
- *
- * Basic test to test behaviour of PR_GET_TSC and PR_SET_TSC
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <signal.h>
-#include <inttypes.h>
-
-
-#include <sys/prctl.h>
-#include <linux/prctl.h>
-
-/* Get/set the process' ability to use the timestamp counter instruction */
-#ifndef PR_GET_TSC
-#define PR_GET_TSC 25
-#define PR_SET_TSC 26
-# define PR_TSC_ENABLE		1   /* allow the use of the timestamp counter */
-# define PR_TSC_SIGSEGV		2   /* throw a SIGSEGV instead of reading the TSC */
-#endif
-
-const char *tsc_names[] =
-{
-	[0] = "[not set]",
-	[PR_TSC_ENABLE] = "PR_TSC_ENABLE",
-	[PR_TSC_SIGSEGV] = "PR_TSC_SIGSEGV",
-};
-
-static uint64_t rdtsc(void)
-{
-uint32_t lo, hi;
-/* We cannot use "=A", since this would use %rax on x86_64 */
-__asm__ __volatile__ ("rdtsc" : "=a" (lo), "=d" (hi));
-return (uint64_t)hi << 32 | lo;
-}
-
-static void sigsegv_cb(int sig)
-{
-	int tsc_val = 0;
-
-	printf("[ SIG_SEGV ]\n");
-	printf("prctl(PR_GET_TSC, &tsc_val); ");
-	fflush(stdout);
-
-	if ( prctl(PR_GET_TSC, &tsc_val) == -1)
-		perror("prctl");
-
-	printf("tsc_val == %s\n", tsc_names[tsc_val]);
-	printf("prctl(PR_SET_TSC, PR_TSC_ENABLE)\n");
-	fflush(stdout);
-	if ( prctl(PR_SET_TSC, PR_TSC_ENABLE) == -1)
-		perror("prctl");
-
-	printf("rdtsc() == ");
-}
-
-int main(void)
-{
-	int tsc_val = 0;
-
-	signal(SIGSEGV, sigsegv_cb);
-
-	printf("rdtsc() == %llu\n", (unsigned long long)rdtsc());
-	printf("prctl(PR_GET_TSC, &tsc_val); ");
-	fflush(stdout);
-
-	if ( prctl(PR_GET_TSC, &tsc_val) == -1)
-		perror("prctl");
-
-	printf("tsc_val == %s\n", tsc_names[tsc_val]);
-	printf("rdtsc() == %llu\n", (unsigned long long)rdtsc());
-	printf("prctl(PR_SET_TSC, PR_TSC_ENABLE)\n");
-	fflush(stdout);
-
-	if ( prctl(PR_SET_TSC, PR_TSC_ENABLE) == -1)
-		perror("prctl");
-
-	printf("rdtsc() == %llu\n", (unsigned long long)rdtsc());
-	printf("prctl(PR_SET_TSC, PR_TSC_SIGSEGV)\n");
-	fflush(stdout);
-
-	if ( prctl(PR_SET_TSC, PR_TSC_SIGSEGV) == -1)
-		perror("prctl");
-
-	printf("rdtsc() == ");
-	fflush(stdout);
-	printf("%llu\n", (unsigned long long)rdtsc());
-	fflush(stdout);
-
-	exit(EXIT_SUCCESS);
-}
-
diff --git a/tools/testing/selftests/prctl/.gitignore b/tools/testing/selftests/prctl/.gitignore
new file mode 100644
index 0000000..0b5c274
--- /dev/null
+++ b/tools/testing/selftests/prctl/.gitignore
@@ -0,0 +1,3 @@
+disable-tsc-ctxt-sw-stress-test
+disable-tsc-on-off-stress-test
+disable-tsc-test
diff --git a/tools/testing/selftests/prctl/Makefile b/tools/testing/selftests/prctl/Makefile
new file mode 100644
index 0000000..35aa1c8
--- /dev/null
+++ b/tools/testing/selftests/prctl/Makefile
@@ -0,0 +1,15 @@
+ifndef CROSS_COMPILE
+uname_M := $(shell uname -m 2>/dev/null || echo not)
+ARCH ?= $(shell echo $(uname_M) | sed -e s/i.86/x86/ -e s/x86_64/x86/)
+
+ifeq ($(ARCH),x86)
+TEST_PROGS := disable-tsc-ctxt-sw-stress-test disable-tsc-on-off-stress-test \
+		disable-tsc-test
+all: $(TEST_PROGS)
+
+include ../lib.mk
+
+clean:
+	rm -fr $(TEST_PROGS)
+endif
+endif
diff --git a/tools/testing/selftests/prctl/disable-tsc-ctxt-sw-stress-test.c b/tools/testing/selftests/prctl/disable-tsc-ctxt-sw-stress-test.c
new file mode 100644
index 0000000..f7499d1
--- /dev/null
+++ b/tools/testing/selftests/prctl/disable-tsc-ctxt-sw-stress-test.c
@@ -0,0 +1,97 @@
+/*
+ * Tests for prctl(PR_GET_TSC, ...) / prctl(PR_SET_TSC, ...)
+ *
+ * Tests if the control register is updated correctly
+ * at context switches
+ *
+ * Warning: this test will cause a very high load for a few seconds
+ *
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <signal.h>
+#include <inttypes.h>
+#include <wait.h>
+
+
+#include <sys/prctl.h>
+#include <linux/prctl.h>
+
+/* Get/set the process' ability to use the timestamp counter instruction */
+#ifndef PR_GET_TSC
+#define PR_GET_TSC 25
+#define PR_SET_TSC 26
+# define PR_TSC_ENABLE		1   /* allow the use of the timestamp counter */
+# define PR_TSC_SIGSEGV		2   /* throw a SIGSEGV instead of reading the TSC */
+#endif
+
+static uint64_t rdtsc(void)
+{
+uint32_t lo, hi;
+/* We cannot use "=A", since this would use %rax on x86_64 */
+__asm__ __volatile__ ("rdtsc" : "=a" (lo), "=d" (hi));
+return (uint64_t)hi << 32 | lo;
+}
+
+static void sigsegv_expect(int sig)
+{
+	/* */
+}
+
+static void segvtask(void)
+{
+	if (prctl(PR_SET_TSC, PR_TSC_SIGSEGV) < 0)
+	{
+		perror("prctl");
+		exit(0);
+	}
+	signal(SIGSEGV, sigsegv_expect);
+	alarm(10);
+	rdtsc();
+	fprintf(stderr, "FATAL ERROR, rdtsc() succeeded while disabled\n");
+	exit(0);
+}
+
+
+static void sigsegv_fail(int sig)
+{
+	fprintf(stderr, "FATAL ERROR, rdtsc() failed while enabled\n");
+	exit(0);
+}
+
+static void rdtsctask(void)
+{
+	if (prctl(PR_SET_TSC, PR_TSC_ENABLE) < 0)
+	{
+		perror("prctl");
+		exit(0);
+	}
+	signal(SIGSEGV, sigsegv_fail);
+	alarm(10);
+	for(;;) rdtsc();
+}
+
+
+int main(void)
+{
+	int n_tasks = 100, i;
+
+	fprintf(stderr, "[No further output means we're allright]\n");
+
+	for (i=0; i<n_tasks; i++)
+		if (fork() == 0)
+		{
+			if (i & 1)
+				segvtask();
+			else
+				rdtsctask();
+		}
+
+	for (i=0; i<n_tasks; i++)
+		wait(NULL);
+
+	exit(0);
+}
+
diff --git a/tools/testing/selftests/prctl/disable-tsc-on-off-stress-test.c b/tools/testing/selftests/prctl/disable-tsc-on-off-stress-test.c
new file mode 100644
index 0000000..a06f027
--- /dev/null
+++ b/tools/testing/selftests/prctl/disable-tsc-on-off-stress-test.c
@@ -0,0 +1,96 @@
+/*
+ * Tests for prctl(PR_GET_TSC, ...) / prctl(PR_SET_TSC, ...)
+ *
+ * Tests if the control register is updated correctly
+ * when set with prctl()
+ *
+ * Warning: this test will cause a very high load for a few seconds
+ *
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <signal.h>
+#include <inttypes.h>
+#include <wait.h>
+
+
+#include <sys/prctl.h>
+#include <linux/prctl.h>
+
+/* Get/set the process' ability to use the timestamp counter instruction */
+#ifndef PR_GET_TSC
+#define PR_GET_TSC 25
+#define PR_SET_TSC 26
+# define PR_TSC_ENABLE		1   /* allow the use of the timestamp counter */
+# define PR_TSC_SIGSEGV		2   /* throw a SIGSEGV instead of reading the TSC */
+#endif
+
+/* snippet from wikipedia :-) */
+
+static uint64_t rdtsc(void)
+{
+uint32_t lo, hi;
+/* We cannot use "=A", since this would use %rax on x86_64 */
+__asm__ __volatile__ ("rdtsc" : "=a" (lo), "=d" (hi));
+return (uint64_t)hi << 32 | lo;
+}
+
+int should_segv = 0;
+
+static void sigsegv_cb(int sig)
+{
+	if (!should_segv)
+	{
+		fprintf(stderr, "FATAL ERROR, rdtsc() failed while enabled\n");
+		exit(0);
+	}
+	if (prctl(PR_SET_TSC, PR_TSC_ENABLE) < 0)
+	{
+		perror("prctl");
+		exit(0);
+	}
+	should_segv = 0;
+
+	rdtsc();
+}
+
+static void task(void)
+{
+	signal(SIGSEGV, sigsegv_cb);
+	alarm(10);
+	for(;;)
+	{
+		rdtsc();
+		if (should_segv)
+		{
+			fprintf(stderr, "FATAL ERROR, rdtsc() succeeded while disabled\n");
+			exit(0);
+		}
+		if (prctl(PR_SET_TSC, PR_TSC_SIGSEGV) < 0)
+		{
+			perror("prctl");
+			exit(0);
+		}
+		should_segv = 1;
+	}
+}
+
+
+int main(void)
+{
+	int n_tasks = 100, i;
+
+	fprintf(stderr, "[No further output means we're allright]\n");
+
+	for (i=0; i<n_tasks; i++)
+		if (fork() == 0)
+			task();
+
+	for (i=0; i<n_tasks; i++)
+		wait(NULL);
+
+	exit(0);
+}
+
diff --git a/tools/testing/selftests/prctl/disable-tsc-test.c b/tools/testing/selftests/prctl/disable-tsc-test.c
new file mode 100644
index 0000000..8d494f7
--- /dev/null
+++ b/tools/testing/selftests/prctl/disable-tsc-test.c
@@ -0,0 +1,95 @@
+/*
+ * Tests for prctl(PR_GET_TSC, ...) / prctl(PR_SET_TSC, ...)
+ *
+ * Basic test to test behaviour of PR_GET_TSC and PR_SET_TSC
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <signal.h>
+#include <inttypes.h>
+
+
+#include <sys/prctl.h>
+#include <linux/prctl.h>
+
+/* Get/set the process' ability to use the timestamp counter instruction */
+#ifndef PR_GET_TSC
+#define PR_GET_TSC 25
+#define PR_SET_TSC 26
+# define PR_TSC_ENABLE		1   /* allow the use of the timestamp counter */
+# define PR_TSC_SIGSEGV		2   /* throw a SIGSEGV instead of reading the TSC */
+#endif
+
+const char *tsc_names[] =
+{
+	[0] = "[not set]",
+	[PR_TSC_ENABLE] = "PR_TSC_ENABLE",
+	[PR_TSC_SIGSEGV] = "PR_TSC_SIGSEGV",
+};
+
+static uint64_t rdtsc(void)
+{
+uint32_t lo, hi;
+/* We cannot use "=A", since this would use %rax on x86_64 */
+__asm__ __volatile__ ("rdtsc" : "=a" (lo), "=d" (hi));
+return (uint64_t)hi << 32 | lo;
+}
+
+static void sigsegv_cb(int sig)
+{
+	int tsc_val = 0;
+
+	printf("[ SIG_SEGV ]\n");
+	printf("prctl(PR_GET_TSC, &tsc_val); ");
+	fflush(stdout);
+
+	if ( prctl(PR_GET_TSC, &tsc_val) == -1)
+		perror("prctl");
+
+	printf("tsc_val == %s\n", tsc_names[tsc_val]);
+	printf("prctl(PR_SET_TSC, PR_TSC_ENABLE)\n");
+	fflush(stdout);
+	if ( prctl(PR_SET_TSC, PR_TSC_ENABLE) == -1)
+		perror("prctl");
+
+	printf("rdtsc() == ");
+}
+
+int main(void)
+{
+	int tsc_val = 0;
+
+	signal(SIGSEGV, sigsegv_cb);
+
+	printf("rdtsc() == %llu\n", (unsigned long long)rdtsc());
+	printf("prctl(PR_GET_TSC, &tsc_val); ");
+	fflush(stdout);
+
+	if ( prctl(PR_GET_TSC, &tsc_val) == -1)
+		perror("prctl");
+
+	printf("tsc_val == %s\n", tsc_names[tsc_val]);
+	printf("rdtsc() == %llu\n", (unsigned long long)rdtsc());
+	printf("prctl(PR_SET_TSC, PR_TSC_ENABLE)\n");
+	fflush(stdout);
+
+	if ( prctl(PR_SET_TSC, PR_TSC_ENABLE) == -1)
+		perror("prctl");
+
+	printf("rdtsc() == %llu\n", (unsigned long long)rdtsc());
+	printf("prctl(PR_SET_TSC, PR_TSC_SIGSEGV)\n");
+	fflush(stdout);
+
+	if ( prctl(PR_SET_TSC, PR_TSC_SIGSEGV) == -1)
+		perror("prctl");
+
+	printf("rdtsc() == ");
+	fflush(stdout);
+	printf("%llu\n", (unsigned long long)rdtsc());
+	fflush(stdout);
+
+	exit(EXIT_SUCCESS);
+}
+
-- 
2.7.4