LKML Archive on lore.kernel.org
 help / color / Atom feed
From: Luca Weiss <luca@z3ntu.xyz>
To: Maxime Ripard <maxime@cerno.tech>
Cc: linux-arm-kernel@lists.infradead.org,
	~postmarketos/upstreaming@lists.sr.ht,
	Rob Herring <robh+dt@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] arm64: dts: sun50i-pinephone: add led flash
Date: Wed, 29 Jul 2020 18:23:30 +0200
Message-ID: <3310810.lkFDjMPtvk@g550jk> (raw)
In-Reply-To: <20200729123444.5t5cv47umhwu7jnd@gilmour.lan>

Hi Maxime,

On Mittwoch, 29. Juli 2020 14:34:44 CEST Maxime Ripard wrote:
> Hi!
> 
> On Sat, Jul 25, 2020 at 01:08:12PM +0200, Luca Weiss wrote:
> > All revisions of the PinePhone have an SGM3140 LED flash. The gpios were
> > swapped on v1.0 of the board but this was fixed in later revisions.
> > 
> > Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> > ---
> > 
> >  .../boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts   |  5 +++++
> >  .../boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts   |  5 +++++
> >  .../boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts   |  5 +++++
> >  .../boot/dts/allwinner/sun50i-a64-pinephone.dtsi      | 11 +++++++++++
> >  4 files changed, 26 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts
> > b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts index
> > 0c42272106afa..b579b03d4e026 100644
> > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts
> > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts
> > @@ -9,3 +9,8 @@ / {
> > 
> >  	model = "Pine64 PinePhone Developer Batch (1.0)";
> >  	compatible = "pine64,pinephone-1.0", "allwinner,sun50i-a64";
> >  
> >  };
> > 
> > +
> > +&sgm3140 {
> > +	flash-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
> > +	enable-gpios = <&pio 2 3 GPIO_ACTIVE_HIGH>; /* PC3 */
> > +};
> > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts
> > b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts index
> > 3e99a87e9ce52..8552587aac248 100644
> > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts
> > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts
> > @@ -28,3 +28,8 @@ &backlight {
> > 
> >  	num-interpolated-steps = <50>;
> >  	default-brightness-level = <400>;
> >  
> >  };
> > 
> > +
> > +&sgm3140 {
> > +	flash-gpios = <&pio 2 3 GPIO_ACTIVE_HIGH>; /* PC3 */
> > +	enable-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
> > +};
> > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts
> > b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts index
> > a9f5b670c9b82..ec77715ba4a2a 100644
> > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts
> > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts
> > @@ -38,3 +38,8 @@ &lis3mdl {
> > 
> >  	interrupt-parent = <&pio>;
> >  	interrupts = <1 1 IRQ_TYPE_EDGE_RISING>; /* PB1 */
> >  
> >  };
> > 
> > +
> > +&sgm3140 {
> > +	flash-gpios = <&pio 2 3 GPIO_ACTIVE_HIGH>; /* PC3 */
> > +	enable-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
> > +};
> > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
> > b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi index
> > 25150aba749dc..e0bc1bcc1c1f3 100644
> > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
> > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
> > @@ -60,6 +60,17 @@ vibrator {
> > 
> >  		enable-gpios = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */
> >  		vcc-supply = <&reg_dcdc1>;
> >  	
> >  	};
> > 
> > +
> > +	sgm3140: led-controller {
> 
> The nodes should be ordered by node-name here

Will update the patch, forgot about that.

> > +		compatible = "sgmicro,sgm3140";
> > +		vin-supply = <&reg_dcdc1>;
> > +
> > +		sgm3140_flash: led {
> 
> What do you need the label for?

The label will be used for connecting the flash to the rear camera (which 
hasn't been upstreamed yet) using:

    flash-leds = <&sgm3140_flash>;

Hope that clears it up.

> 
> Thanks!
> Maxime

Regards
Luca



      reply index

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-25 11:08 Luca Weiss
2020-07-29 12:34 ` Maxime Ripard
2020-07-29 16:23   ` Luca Weiss [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3310810.lkFDjMPtvk@g550jk \
    --to=luca@z3ntu.xyz \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maxime@cerno.tech \
    --cc=robh+dt@kernel.org \
    --cc=wens@csie.org \
    --cc=~postmarketos/upstreaming@lists.sr.ht \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git
	git clone --mirror https://lore.kernel.org/lkml/9 lkml/git/9.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git