linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Arnaud POULIQUEN <arnaud.pouliquen@foss.st.com>
To: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>,
	Ohad Ben-Cohen <ohad@wizery.com>,
	<linux-remoteproc@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>,
	<linux-stm32@st-md-mailman.stormreply.com>
Subject: Re: [PATCH v2 1/1] rpmsg: ctrl: Introduce new RPMSG_CREATE/RELEASE_DEV_IOCTL controls
Date: Tue, 22 Jun 2021 09:43:49 +0200	[thread overview]
Message-ID: <343c372e-0c0a-ad4e-356b-47eb975ce0e0@foss.st.com> (raw)
In-Reply-To: <20210621231633.GC980846@p14s>

Hi Mathieu

On 6/22/21 1:16 AM, Mathieu Poirier wrote:
> On Mon, Jun 21, 2021 at 02:58:00PM +0200, Arnaud Pouliquen wrote:
>> Allow the user space application to create and release an rpmsg device
>> by adding RPMSG_CREATE_DEV_IOCTL and RPMSG_RELEASE_DEV_IOCTL ioctrls to
>> the /dev/rpmsg_ctrl interface
>>
>> The RPMSG_CREATE_DEV_IOCTL Ioctl can be used to instantiate a local rpmsg
>> device.
>> Depending on the back-end implementation, the associated rpmsg driver is
>> probed and a NS announcement can be sent to the remote processor.
>>
>> The RPMSG_RELEASE_DEV_IOCTL allows the user application to release a
>> rpmsg device created either by the remote processor or with the
>> RPMSG_CREATE_DEV_IOCTL call.
>> Depending on the back-end implementation, the associated rpmsg driver is
>> removed and a NS destroy rpmsg can be sent to the remote processor.
>>
>> Suggested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
>> Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
>> ---
>>  drivers/rpmsg/rpmsg_ctrl.c | 37 +++++++++++++++++++++++++++++++++----
>>  include/uapi/linux/rpmsg.h | 10 ++++++++++
>>  2 files changed, 43 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/rpmsg/rpmsg_ctrl.c b/drivers/rpmsg/rpmsg_ctrl.c
>> index eeb1708548c1..cb19e32d05e1 100644
>> --- a/drivers/rpmsg/rpmsg_ctrl.c
>> +++ b/drivers/rpmsg/rpmsg_ctrl.c
>> @@ -23,6 +23,7 @@
>>  #include <uapi/linux/rpmsg.h>
>>  
>>  #include "rpmsg_char.h"
>> +#include "rpmsg_internal.h"
>>  
>>  static dev_t rpmsg_major;
>>  
>> @@ -37,11 +38,13 @@ static DEFINE_IDA(rpmsg_minor_ida);
>>   * @rpdev:	underlaying rpmsg device
>>   * @cdev:	cdev for the ctrl device
>>   * @dev:	device for the ctrl device
>> + * @ctrl_lock:	serialize the ioctrls.
>>   */
>>  struct rpmsg_ctrldev {
>>  	struct rpmsg_device *rpdev;
>>  	struct cdev cdev;
>>  	struct device dev;
>> +	struct mutex ctrl_lock;
>>  };
>>  
>>  static int rpmsg_ctrldev_open(struct inode *inode, struct file *filp)
>> @@ -70,9 +73,8 @@ static long rpmsg_ctrldev_ioctl(struct file *fp, unsigned int cmd,
>>  	void __user *argp = (void __user *)arg;
>>  	struct rpmsg_endpoint_info eptinfo;
>>  	struct rpmsg_channel_info chinfo;
>> -
>> -	if (cmd != RPMSG_CREATE_EPT_IOCTL)
>> -		return -EINVAL;
>> +	struct rpmsg_device *rpdev;
>> +	int ret = 0;
>>  
>>  	if (copy_from_user(&eptinfo, argp, sizeof(eptinfo)))
>>  		return -EFAULT;
>> @@ -82,7 +84,33 @@ static long rpmsg_ctrldev_ioctl(struct file *fp, unsigned int cmd,
>>  	chinfo.src = eptinfo.src;
>>  	chinfo.dst = eptinfo.dst;
>>  
>> -	return rpmsg_chrdev_eptdev_create(ctrldev->rpdev, &ctrldev->dev, chinfo);
>> +	mutex_lock(&ctrldev->ctrl_lock);
> 
> Have you been able to verify the VFS layer doesn't take care of serializing
> ioctl() and file accesses in general?  I did a quick search in the drivers/
> directory and the vast majority of implementations don't use a lock.

Please find my answer here https://lkml.org/lkml/2021/6/21/235
I tested by suppressing the lock and adding msleep to check a potential atomic.
in the rpmsg_ctrldev_ioctl function. Nothing seems prevent the re-entrance.

Regards,
Arnaud

> 
> Thanks,
> Mathieu
> 
>> +	switch (cmd) {
>> +	case RPMSG_CREATE_EPT_IOCTL:
>> +		ret = rpmsg_chrdev_eptdev_create(ctrldev->rpdev, &ctrldev->dev, chinfo);
>> +		break;
>> +
>> +	case RPMSG_CREATE_DEV_IOCTL:
>> +		rpdev = rpmsg_create_channel(ctrldev->rpdev, &chinfo);
>> +		if (!rpdev) {
>> +			dev_err(&ctrldev->dev, "failed to create %s channel\n", chinfo.name);
>> +			ret = -ENXIO;
>> +		}
>> +		break;
>> +
>> +	case RPMSG_RELEASE_DEV_IOCTL:
>> +		ret = rpmsg_release_channel(ctrldev->rpdev, &chinfo);
>> +		if (ret)
>> +			dev_err(&ctrldev->dev, "failed to release %s channel (%d)\n",
>> +				chinfo.name, ret);
>> +		break;
>> +
>> +	default:
>> +		ret = -EINVAL;
>> +	}
>> +	mutex_unlock(&ctrldev->ctrl_lock);
>> +
>> +	return ret;
>>  };
>>  
>>  static const struct file_operations rpmsg_ctrldev_fops = {
>> @@ -119,6 +147,7 @@ static int rpmsg_ctrldev_probe(struct rpmsg_device *rpdev)
>>  	device_initialize(dev);
>>  	dev->parent = &rpdev->dev;
>>  
>> +	mutex_init(&ctrldev->ctrl_lock);
>>  	cdev_init(&ctrldev->cdev, &rpmsg_ctrldev_fops);
>>  	ctrldev->cdev.owner = THIS_MODULE;
>>  
>> diff --git a/include/uapi/linux/rpmsg.h b/include/uapi/linux/rpmsg.h
>> index f5ca8740f3fb..1637e68177d9 100644
>> --- a/include/uapi/linux/rpmsg.h
>> +++ b/include/uapi/linux/rpmsg.h
>> @@ -33,4 +33,14 @@ struct rpmsg_endpoint_info {
>>   */
>>  #define RPMSG_DESTROY_EPT_IOCTL	_IO(0xb5, 0x2)
>>  
>> +/**
>> + * Instantiate a new local rpmsg service device.
>> + */
>> +#define RPMSG_CREATE_DEV_IOCTL	_IOW(0xb5, 0x3, struct rpmsg_endpoint_info)
>> +
>> +/**
>> + * Release a local rpmsg device.
>> + */
>> +#define RPMSG_RELEASE_DEV_IOCTL	_IOW(0xb5, 0x4, struct rpmsg_endpoint_info)
>> +
>>  #endif
>> -- 
>> 2.17.1
>>

  reply	other threads:[~2021-06-22  7:43 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-21 12:57 [PATCH v2 0/1] rpmsg: ctrl: Add ability to instantiate rpmsg device locally Arnaud Pouliquen
2021-06-21 12:58 ` [PATCH v2 1/1] rpmsg: ctrl: Introduce new RPMSG_CREATE/RELEASE_DEV_IOCTL controls Arnaud Pouliquen
2021-06-21 23:16   ` Mathieu Poirier
2021-06-22  7:43     ` Arnaud POULIQUEN [this message]
2021-06-22 19:56       ` Mathieu Poirier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=343c372e-0c0a-ad4e-356b-47eb975ce0e0@foss.st.com \
    --to=arnaud.pouliquen@foss.st.com \
    --cc=bjorn.andersson@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mathieu.poirier@linaro.org \
    --cc=ohad@wizery.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).