linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Rafael J. Wysocki" <rjw@rjwysocki.net>
To: Bjorn Helgaas <helgaas@kernel.org>
Cc: LKML <linux-kernel@vger.kernel.org>,
	Linux PCI <linux-pci@vger.kernel.org>,
	Linux PM <linux-pm@vger.kernel.org>,
	Mika Westerberg <mika.westerberg@linux.intel.com>
Subject: [PATCH 3/5] PCI: PM: Fold __pci_start_power_transition() into its caller
Date: Tue, 05 Nov 2019 11:29:16 +0100	[thread overview]
Message-ID: <3458080.lsoDbfkST9@kreacher> (raw)
In-Reply-To: <2771503.n70vfTtcVb@kreacher>

From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Because pci_power_up() has become the only caller of
__pci_start_power_transition(), there is no need for the latter to
be a separate function any more, so fold it into the former, drop a
redundant check and reduce the number of lines of code somewhat.

Code rearrangement, no intentional functional impact.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---
 drivers/pci/pci.c |   48 ++++++++++++++++++------------------------------
 1 file changed, 18 insertions(+), 30 deletions(-)

Index: linux-pm/drivers/pci/pci.c
===================================================================
--- linux-pm.orig/drivers/pci/pci.c
+++ linux-pm/drivers/pci/pci.c
@@ -1003,42 +1003,30 @@ void pci_wakeup_bus(struct pci_bus *bus)
 }
 
 /**
- * __pci_start_power_transition - Start power transition of a PCI device
- * @dev: PCI device to handle.
- * @state: State to put the device into.
+ * pci_power_up - Put the given device into D0
+ * @dev: PCI device to power up
  */
-static void __pci_start_power_transition(struct pci_dev *dev, pci_power_t state)
+int pci_power_up(struct pci_dev *dev)
 {
-	if (state == PCI_D0) {
-		pci_platform_power_transition(dev, PCI_D0);
+	pci_platform_power_transition(dev, PCI_D0);
+
+	/*
+	 * Mandatory power management transition delays, see PCI Express Base
+	 * Specification Revision 2.0 Section 6.6.1: Conventional Reset.  Do not
+	 * delay for devices powered on/off by corresponding bridge, because
+	 * have already delayed for the bridge.
+	 */
+	if (dev->runtime_d3cold) {
+		if (dev->d3cold_delay && !dev->imm_ready)
+			msleep(dev->d3cold_delay);
 		/*
-		 * Mandatory power management transition delays, see
-		 * PCI Express Base Specification Revision 2.0 Section
-		 * 6.6.1: Conventional Reset.  Do not delay for
-		 * devices powered on/off by corresponding bridge,
-		 * because have already delayed for the bridge.
+		 * When powering on a bridge from D3cold, the whole hierarchy
+		 * may be powered on into D0uninitialized state, resume them to
+		 * give them a chance to suspend again
 		 */
-		if (dev->runtime_d3cold) {
-			if (dev->d3cold_delay && !dev->imm_ready)
-				msleep(dev->d3cold_delay);
-			/*
-			 * When powering on a bridge from D3cold, the
-			 * whole hierarchy may be powered on into
-			 * D0uninitialized state, resume them to give
-			 * them a chance to suspend again
-			 */
-			pci_wakeup_bus(dev->subordinate);
-		}
+		pci_wakeup_bus(dev->subordinate);
 	}
-}
 
-/**
- * pci_power_up - Put the given device into D0
- * @dev: PCI device to power up
- */
-int pci_power_up(struct pci_dev *dev)
-{
-	__pci_start_power_transition(dev, PCI_D0);
 	return pci_raw_set_power_state(dev, PCI_D0);
 }
 




  parent reply	other threads:[~2019-11-05 10:32 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-05 10:11 [PATCH 0/5] PCI: PM: Cleanups related to power state changes Rafael J. Wysocki
2019-11-05 10:13 ` [PATCH 1/5] PCI: PM: Move power state update away from pci_power_up() Rafael J. Wysocki
2019-11-05 10:27 ` [PATCH 2/5] PCI: PM: Use pci_power_up() in pci_set_power_state() Rafael J. Wysocki
2019-11-05 10:29 ` Rafael J. Wysocki [this message]
2019-11-05 10:30 ` [PATCH 4/5] PCI: PM: Avoid exporting __pci_complete_power_transition() Rafael J. Wysocki
2019-11-05 10:32 ` [PATCH 5/5] PCI: PM: Fold __pci_complete_power_transition() into its caller Rafael J. Wysocki
2019-11-05 16:09   ` Christoph Hellwig
2019-11-05 16:15     ` Rafael J. Wysocki
2019-11-05 11:28 ` [PATCH 0/5] PCI: PM: Cleanups related to power state changes Rafael J. Wysocki
2019-11-05 22:35   ` Bjorn Helgaas
2019-11-05 22:48     ` Rafael J. Wysocki
2019-11-05 13:02 ` Mika Westerberg
2019-11-05 16:32 ` [PATCH update 5/5] PCI: PM: Fold __pci_complete_power_transition() into its caller Rafael J. Wysocki
2019-11-06 19:02 ` [PATCH 0/5] PCI: PM: Cleanups related to power state changes Bjorn Helgaas
2019-11-07 13:33   ` Rafael J. Wysocki
2019-11-08 11:49   ` Rafael J. Wysocki
2019-11-08 20:13     ` Bjorn Helgaas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3458080.lsoDbfkST9@kreacher \
    --to=rjw@rjwysocki.net \
    --cc=helgaas@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=mika.westerberg@linux.intel.com \
    --subject='Re: [PATCH 3/5] PCI: PM: Fold __pci_start_power_transition() into its caller' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).