From: Kirill Marinushkin <k.marinushkin@gmail.com>
To: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Stefan Wahren <stefan.wahren@i2se.com>,
devel@driverdev.osuosl.org,
Florian Fainelli <f.fainelli@gmail.com>,
Scott Branden <sbranden@broadcom.com>,
Ray Jui <rjui@broadcom.com>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Eric Anholt <eric@anholt.net>,
Michael Zoran <mzoran@crowfest.net>,
bcm-kernel-feedback-list <bcm-kernel-feedback-list@broadcom.com>,
linux-rpi-kernel@lists.infradead.org,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-arm Mailing List <linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH v3] staging: bcm2835-audio: Release resources on module_exit()
Date: Wed, 21 Mar 2018 20:51:09 +0100 [thread overview]
Message-ID: <3547aeb4-4866-1878-9c5d-ed9e1403cb56@gmail.com> (raw)
In-Reply-To: <CAHp75VcwFRVX7RTSWv2R_7Hr=gzrwK1aJA8Unypx6zQ49neGjA@mail.gmail.com>
On 03/21/18 20:24, Andy Shevchenko wrote:
> On Wed, Mar 21, 2018 at 8:48 PM, Kirill Marinushkin
> <k.marinushkin@gmail.com> wrote:
>> In the current implementation, `rmmod snd_bcm2835` does not release
>> resources properly. It causes an oops when trying to list sound devices.
>>
>> This commit fixes it.
>>
>> The details WRT allocation / free are described below.
>>
>> Device structure WRT allocation:
>>
>> pdev
>> \childdev[]
>> \card
>> \chip
>> \pcm
>> \ctl
>>
>> Allocation / register sequence:
>>
>> * childdev: devm_kzalloc - freed during driver detach
>> * childdev: device_initialize - freed during device_unregister
>> * pdev: devres_alloc - freed during driver detach
>> * childdev: device_add - removed during device_unregister
>> * pdev, childdev: devres_add - freed during driver detach
>> * card: snd_card_new - freed during snd_card_free
>> * chip: kzalloc - freed during kfree
>> * card, chip: snd_device_new - freed during snd_device_free
>> * chip: new_pcm - TODO: free pcm
>> * chip: new_ctl - TODO: free ctl
>> * card: snd_card_register - unregistered during snd_card_free
>>
>> Free / unregister sequence:
>>
>> * card: snd_card_free
>> * card, chip: snd_device_free
>> * childdev: device_unregister
>> * chip: kfree
>>
>> Steps to reproduce the issue before this commit:
>>
>> ~~~~
>> $ rmmod snd_bcm2835
>> $ aplay -L
>> [ 138.648130] Unable to handle kernel paging request at virtual address 7f1343c0
>> [ 138.660415] pgd = ad8f0000
>> [ 138.665567] [7f1343c0] *pgd=3864c811, *pte=00000000, *ppte=00000000
>> [ 138.674887] Internal error: Oops: 7 [#1] SMP ARM
>> [ 138.683571] Modules linked in: sha256_generic cfg80211 rfkill snd_pcm snd_timer
>> snd fixed uio_pdrv_genirq uio ip_tables x_tables ipv6 [last unloaded: snd_bcm2835
>> ]
>> [ 138.706594] CPU: 3 PID: 463 Comm: aplay Tainted: G WC 4.15.0-rc1-v
>> 7+ #6
>> [ 138.719833] Hardware name: BCM2835
>> [ 138.726016] task: b877ac00 task.stack: aebec000
>> [ 138.733408] PC is at try_module_get+0x38/0x24c
>> [ 138.740813] LR is at snd_ctl_open+0x58/0x194 [snd]
>> [ 138.748485] pc : [<801c4d5c>] lr : [<7f0e6b2c>] psr: 20000013
>> [ 138.757709] sp : aebedd60 ip : aebedd88 fp : aebedd84
>> [ 138.765884] r10: 00000000 r9 : 00000004 r8 : 7f0ed440
>> [ 138.774040] r7 : b7e469b0 r6 : 7f0e6b2c r5 : afd91900 r4 : 7f1343c0
>> [ 138.783571] r3 : aebec000 r2 : 00000001 r1 : b877ac00 r0 : 7f1343c0
>> [ 138.793084] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
>> [ 138.803300] Control: 10c5387d Table: 2d8f006a DAC: 00000055
>> [ 138.812064] Process aplay (pid: 463, stack limit = 0xaebec210)
>> [ 138.820868] Stack: (0xaebedd60 to 0xaebee000)
>> [ 138.828207] dd60: 00000000 b848d000 afd91900 00000000 b7e469b0 7f0ed440 aebedda4 aebedd88
>> [ 138.842371] dd80: 7f0e6b2c 801c4d30 afd91900 7f0ea4dc 00000000 b7e469b0 aebeddcc aebedda8
>> [ 138.856611] dda0: 7f0e250c 7f0e6ae0 7f0e2464 b8478ec0 b7e469b0 afd91900 7f0ea388 00000000
>> [ 138.870864] ddc0: aebeddf4 aebeddd0 802ce590 7f0e2470 8090ab64 afd91900 afd91900 b7e469b0
>> [ 138.885301] dde0: afd91908 802ce4e4 aebede1c aebeddf8 802c57b4 802ce4f0 afd91900 aebedea8
>> [ 138.900110] de00: b7fa4c00 00000000 00000000 00000004 aebede3c aebede20 802c6ba8 802c56b4
>> [ 138.915260] de20: aebedea8 00000000 aebedf5c 00000000 aebedea4 aebede40 802d9a68 802c6b58
>> [ 138.930661] de40: b874ddd0 00000000 00000000 00000001 00000041 00000000 afd91900 aebede70
>> [ 138.946402] de60: 00000000 00000000 00000002 b7e469b0 b8a87610 b8d6ab80 801852f8 00080000
>> [ 138.962314] de80: aebedf5c aebedea8 00000001 80108464 aebec000 00000000 aebedf4c aebedea8
>> [ 138.978414] dea0: 802dacd4 802d970c b8a87610 b8d6ab80 a7982bc6 00000009 af363019 b9231480
>> [ 138.994617] dec0: 00000000 b8c038a0 b7e469b0 00000101 00000002 00000238 00000000 00000000
>> [ 139.010823] dee0: 00000000 aebedee8 00080000 0000000f aebedf3c aebedf00 802ed7e4 80843f94
>> [ 139.027025] df00: 00000003 00080000 b9231490 b9231480 00000000 00080000 af363000 00000000
>> [ 139.043229] df20: 00000005 00000002 ffffff9c 00000000 00080000 ffffff9c af363000 00000003
>> [ 139.059430] df40: aebedf94 aebedf50 802c6f70 802dac70 aebec000 00000000 00000001 00000000
>> [ 139.075629] df60: 00020000 00000004 00000100 00000001 7ebe577c 0002e038 00000000 00000005
>> [ 139.091828] df80: 80108464 aebec000 aebedfa4 aebedf98 802c7060 802c6e6c 00000000 aebedfa8
>> [ 139.108025] dfa0: 801082c0 802c7040 7ebe577c 0002e038 7ebe577c 00080000 00000b98 e81c8400
>> [ 139.124222] dfc0: 7ebe577c 0002e038 00000000 00000005 7ebe57e4 00a20af8 7ebe57f0 76f87394
>> [ 139.140419] dfe0: 00000000 7ebe55c4 76ec88e8 76df1d9c 60000010 7ebe577c 00000000 00000000
>> [ 139.156715] [<801c4d5c>] (try_module_get) from [<7f0e6b2c>] (snd_ctl_open+0x58/0x194 [snd])
>> [ 139.173222] [<7f0e6b2c>] (snd_ctl_open [snd]) from [<7f0e250c>] (snd_open+0xa8/0x14c [snd])
>> [ 139.189683] [<7f0e250c>] (snd_open [snd]) from [<802ce590>] (chrdev_open+0xac/0x188)
>> [ 139.205465] [<802ce590>] (chrdev_open) from [<802c57b4>] (do_dentry_open+0x10c/0x314)
>> [ 139.221347] [<802c57b4>] (do_dentry_open) from [<802c6ba8>] (vfs_open+0x5c/0x88)
>> [ 139.236788] [<802c6ba8>] (vfs_open) from [<802d9a68>] (path_openat+0x368/0x944)
>> [ 139.248270] [<802d9a68>] (path_openat) from [<802dacd4>] (do_filp_open+0x70/0xc4)
>> [ 139.263731] [<802dacd4>] (do_filp_open) from [<802c6f70>] (do_sys_open+0x110/0x1d4)
>> [ 139.279378] [<802c6f70>] (do_sys_open) from [<802c7060>] (SyS_open+0x2c/0x30)
>> [ 139.290647] [<802c7060>] (SyS_open) from [<801082c0>] (ret_fast_syscall+0x0/0x28)
>> [ 139.306021] Code: e3c3303f e5932004 e2822001 e5832004 (e5943000)
>> [ 139.316265] ---[ end trace 7f3f7f6193b663ed ]---
>> [ 139.324956] note: aplay[463] exited with preempt_count 1
>> ~~~~
>>
> Sorry, just noticed that devm part doesn't make sense after your patch
> and misleading.
> So, after addressing it, FWIW,
> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
I will check about devm
>
> P.S. I didn't get why do you need an empty ->remove() stub. Doesn't
> work without it?
In the v1 of this patch, it didn't. But now, when the probing is improved since then, I will check this also
>
>> Signed-off-by: Kirill Marinushkin <k.marinushkin@gmail.com>
>> Cc: Eric Anholt <eric@anholt.net>
>> Cc: Stefan Wahren <stefan.wahren@i2se.com>
>> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>> Cc: Florian Fainelli <f.fainelli@gmail.com>
>> Cc: Ray Jui <rjui@broadcom.com>
>> Cc: Scott Branden <sbranden@broadcom.com>
>> Cc: bcm-kernel-feedback-list@broadcom.com
>> Cc: Michael Zoran <mzoran@crowfest.net>
>> Cc: linux-rpi-kernel@lists.infradead.org
>> Cc: linux-arm-kernel@lists.infradead.org
>> Cc: devel@driverdev.osuosl.org
>> Cc: linux-kernel@vger.kernel.org
>> ---
>> .../staging/vc04_services/bcm2835-audio/bcm2835.c | 57 ++++++++++++----------
>> 1 file changed, 30 insertions(+), 27 deletions(-)
>>
>> diff --git a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c
>> index 8f2d508183b2..125efc55ecb9 100644
>> --- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c
>> +++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c
>> @@ -36,6 +36,10 @@ MODULE_PARM_DESC(enable_compat_alsa,
>> static void snd_devm_unregister_child(struct device *dev, void *res)
>> {
>> struct device *childdev = *(struct device **)res;
>> + struct bcm2835_chip *chip = dev_get_drvdata(childdev);
>> + struct snd_card *card = chip->card;
>> +
>> + snd_card_free(card);
>>
>> device_unregister(childdev);
>> }
>> @@ -61,6 +65,13 @@ static int snd_devm_add_child(struct device *dev, struct device *child)
>> return 0;
>> }
>>
>> +static void snd_devm_release(struct device *dev)
>> +{
>> + struct bcm2835_chip *chip = dev_get_drvdata(dev);
>> +
>> + kfree(chip);
>> +}
>> +
>> static struct device *
>> snd_create_device(struct device *parent,
>> struct device_driver *driver,
>> @@ -76,6 +87,7 @@ snd_create_device(struct device *parent,
>> device_initialize(device);
>> device->parent = parent;
>> device->driver = driver;
>> + device->release = snd_devm_release;
>>
>> dev_set_name(device, "%s", name);
>>
>> @@ -86,18 +98,19 @@ snd_create_device(struct device *parent,
>> return device;
>> }
>>
>> -static int snd_bcm2835_free(struct bcm2835_chip *chip)
>> -{
>> - kfree(chip);
>> - return 0;
>> -}
>> -
>> /* component-destructor
>> * (see "Management of Cards and Components")
>> */
>> static int snd_bcm2835_dev_free(struct snd_device *device)
>> {
>> - return snd_bcm2835_free(device->device_data);
>> + struct bcm2835_chip *chip = device->device_data;
>> + struct snd_card *card = chip->card;
>> +
>> + /* TODO: free pcm, ctl */
>> +
>> + snd_device_free(card, chip);
>> +
>> + return 0;
>> }
>>
>> /* chip-specific constructor
>> @@ -122,7 +135,7 @@ static int snd_bcm2835_create(struct snd_card *card,
>>
>> err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
>> if (err) {
>> - snd_bcm2835_free(chip);
>> + kfree(chip);
>> return err;
>> }
>>
>> @@ -130,31 +143,14 @@ static int snd_bcm2835_create(struct snd_card *card,
>> return 0;
>> }
>>
>> -static void snd_devm_card_free(struct device *dev, void *res)
>> -{
>> - struct snd_card *snd_card = *(struct snd_card **)res;
>> -
>> - snd_card_free(snd_card);
>> -}
>> -
>> static struct snd_card *snd_devm_card_new(struct device *dev)
>> {
>> - struct snd_card **dr;
>> struct snd_card *card;
>> int ret;
>>
>> - dr = devres_alloc(snd_devm_card_free, sizeof(*dr), GFP_KERNEL);
>> - if (!dr)
>> - return ERR_PTR(-ENOMEM);
>> -
>> ret = snd_card_new(dev, -1, NULL, THIS_MODULE, 0, &card);
>> - if (ret) {
>> - devres_free(dr);
>> + if (ret)
>> return ERR_PTR(ret);
>> - }
>> -
>> - *dr = card;
>> - devres_add(dev, dr);
>>
>> return card;
>> }
>> @@ -313,7 +309,7 @@ static int snd_add_child_device(struct device *device,
>> return err;
>> }
>>
>> - dev_set_drvdata(child, card);
>> + dev_set_drvdata(child, chip);
>> dev_info(child, "card created with %d channels\n", numchans);
>>
>> return 0;
>> @@ -414,6 +410,12 @@ static int snd_bcm2835_alsa_probe_dt(struct platform_device *pdev)
>> return 0;
>> }
>>
>> +static int snd_bcm2835_alsa_remove(struct platform_device *pdev)
>> +{
>> + /* trigger snd_devm_unregister_child() */
>> + return 0;
>> +}
>> +
>> #ifdef CONFIG_PM
>>
>> static int snd_bcm2835_alsa_suspend(struct platform_device *pdev,
>> @@ -437,6 +439,7 @@ MODULE_DEVICE_TABLE(of, snd_bcm2835_of_match_table);
>>
>> static struct platform_driver bcm2835_alsa0_driver = {
>> .probe = snd_bcm2835_alsa_probe_dt,
>> + .remove = snd_bcm2835_alsa_remove,
>> #ifdef CONFIG_PM
>> .suspend = snd_bcm2835_alsa_suspend,
>> .resume = snd_bcm2835_alsa_resume,
>> --
>> 2.13.6
>>
>
>
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
next prev parent reply other threads:[~2018-03-21 19:51 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-05 5:52 [PATCH] staging: bcm2835-audio: Release resources on module_exit() Kirill Marinushkin
2018-03-06 12:14 ` Greg Kroah-Hartman
2018-03-06 17:42 ` Kirill Marinushkin
2018-03-13 19:34 ` [PATCH v2] " Kirill Marinushkin
2018-03-13 21:23 ` Andy Shevchenko
2018-03-15 5:57 ` Kirill Marinushkin
2018-03-21 15:03 ` Andy Shevchenko
2018-03-21 16:58 ` Kirill Marinushkin
2018-03-21 18:48 ` [PATCH v3] " Kirill Marinushkin
2018-03-21 19:24 ` Andy Shevchenko
2018-03-21 19:51 ` Kirill Marinushkin [this message]
2018-03-22 21:21 ` Kirill Marinushkin
2018-03-22 21:37 ` [PATCH v4] " Kirill Marinushkin
2018-03-23 16:23 ` Andy Shevchenko
2018-03-23 19:22 ` Kirill Marinushkin
2018-03-25 10:33 ` Andy Shevchenko
2018-03-25 10:44 ` Kirill Marinushkin
2018-03-25 13:03 ` Andy Shevchenko
2018-03-25 13:54 ` Kirill Marinushkin
2018-03-23 19:32 ` [PATCH v5] " Kirill Marinushkin
2018-03-25 10:33 ` Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3547aeb4-4866-1878-9c5d-ed9e1403cb56@gmail.com \
--to=k.marinushkin@gmail.com \
--cc=andy.shevchenko@gmail.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=devel@driverdev.osuosl.org \
--cc=eric@anholt.net \
--cc=f.fainelli@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rpi-kernel@lists.infradead.org \
--cc=mzoran@crowfest.net \
--cc=rjui@broadcom.com \
--cc=sbranden@broadcom.com \
--cc=stefan.wahren@i2se.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).