From: "Guido Günther" <agx@sigxcpu.org>
To: Heikki Krogerus <heikki.krogerus@linux.intel.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org
Subject: [PATCH v1 4/4] usb: typec: tps6598x: Add trace event for data status
Date: Thu, 11 Feb 2021 16:51:05 +0100 [thread overview]
Message-ID: <38b2be2f7bcfc025d6870391e19130dd488a8035.1613058605.git.agx@sigxcpu.org> (raw)
In-Reply-To: <cover.1613058605.git.agx@sigxcpu.org>
This is useful to debug DP negotiation and pin assignment even
when the firmware does all the work.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
---
drivers/usb/typec/tps6598x.c | 12 ++++++-
drivers/usb/typec/tps6598x.h | 36 ++++++++++++++++++++
drivers/usb/typec/tps6598x_trace.h | 54 ++++++++++++++++++++++++++++++
3 files changed, 101 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/typec/tps6598x.c b/drivers/usb/typec/tps6598x.c
index 3e6ad3ba7fc8..a4ec8e56c2b9 100644
--- a/drivers/usb/typec/tps6598x.c
+++ b/drivers/usb/typec/tps6598x.c
@@ -36,6 +36,7 @@
#define TPS_REG_CTRL_CONF 0x29
#define TPS_REG_POWER_STATUS 0x3f
#define TPS_REG_RX_IDENTITY_SOP 0x48
+#define TPS_REG_DATA_STATUS 0x5f
/* TPS_REG_SYSTEM_CONF bits */
#define TPS_SYSCONF_PORTINFO(c) ((c) & 7)
@@ -408,7 +409,7 @@ static irqreturn_t tps6598x_interrupt(int irq, void *data)
struct tps6598x *tps = data;
u64 event1;
u64 event2;
- u32 status;
+ u32 status, data_status;
u16 pwr_status;
int ret;
@@ -438,6 +439,15 @@ static irqreturn_t tps6598x_interrupt(int irq, void *data)
trace_tps6598x_power_status(pwr_status);
}
+ if ((event1 | event2) & TPS_REG_INT_DATA_STATUS_UPDATE) {
+ ret = tps6598x_read32(tps, TPS_REG_DATA_STATUS, &data_status);
+ if (ret < 0) {
+ dev_err(tps->dev, "failed to read data status: %d\n", ret);
+ goto err_clear_ints;
+ }
+ trace_tps6598x_data_status(data_status);
+ }
+
/* Handle plug insert or removal */
if ((event1 | event2) & TPS_REG_INT_PLUG_EVENT) {
if (status & TPS_STATUS_PLUG_PRESENT) {
diff --git a/drivers/usb/typec/tps6598x.h b/drivers/usb/typec/tps6598x.h
index a2b76ee26f53..3794d75ffada 100644
--- a/drivers/usb/typec/tps6598x.h
+++ b/drivers/usb/typec/tps6598x.h
@@ -143,4 +143,40 @@
#define TPS_POWER_STATUS_BC12_STATUS_CDP 2
#define TPS_POWER_STATUS_BC12_STATUS_DCP 3
+/* TPS_REG_DATA_STATUS bits */
+#define TPS_DATA_STATUS_DATA_CONNECTION BIT(0)
+#define TPS_DATA_STATUS_UPSIDE_DOWN BIT(1)
+#define TPS_DATA_STATUS_ACTIVE_CABLE BIT(2)
+#define TPS_DATA_STATUS_USB2_CONNECTION BIT(4)
+#define TPS_DATA_STATUS_USB3_CONNECTION BIT(5)
+#define TPS_DATA_STATUS_USB3_GEN2 BIT(6)
+#define TPS_DATA_STATUS_USB_DATA_ROLE BIT(7)
+#define TPS_DATA_STATUS_DP_CONNECTION BIT(8)
+#define TPS_DATA_STATUS_DP_SINK BIT(9)
+#define TPS_DATA_STATUS_TBT_CONNECTION BIT(16)
+#define TPS_DATA_STATUS_TBT_TYPE BIT(17)
+#define TPS_DATA_STATUS_OPTICAL_CABLE BIT(18)
+#define TPS_DATA_STATUS_ACTIVE_LINK_TRAIN BIT(20)
+#define TPS_DATA_STATUS_FORCE_LSX BIT(23)
+#define TPS_DATA_STATUS_POWER_MISMATCH BIT(24)
+
+#define TPS_DATA_STATUS_DP_PIN_ASSIGNMENT_MASK GENMASK(11, 10)
+#define TPS_DATA_STATUS_DP_PIN_ASSIGNMENT(x) \
+ FIELD_GET(TPS_DATA_STATUS_DP_PIN_ASSIGNMENT_MASK, (x))
+#define TPS_DATA_STATUS_TBT_CABLE_SPEED_MASK GENMASK(27, 25)
+#define TPS_DATA_STATUS_TBT_CABLE_SPEED FIELD_GET(TPS_DATA_STATUS_TBT_CABLE_SPEED_MASK, (x))
+#define TPS_DATA_STATUS_TBT_CABLE_GEN_MASK GENMASK(29, 28)
+#define TPS_DATA_STATUS_TBT_CABLE_GEN FIELD_GET(TPS_DATA_STATUS_TBT_CABLE_GEN_MASK, (x))
+
+/* Map data status to DP spec assignments */
+#define TPS_DATA_STATUS_DP_SPEC_PIN_ASSIGNMENT(x) \
+ ((TPS_DATA_STATUS_DP_PIN_ASSIGNMENT(x) << 1) | \
+ FIELD_GET(TPS_DATA_STATUS_USB3_CONNECTION, (x)))
+#define TPS_DATA_STATUS_DP_SPEC_PIN_ASSIGNMENT_E 0
+#define TPS_DATA_STATUS_DP_SPEC_PIN_ASSIGNMENT_F BIT(0)
+#define TPS_DATA_STATUS_DP_SPEC_PIN_ASSIGNMENT_C BIT(1)
+#define TPS_DATA_STATUS_DP_SPEC_PIN_ASSIGNMENT_D (BIT(1) | BIT(0))
+#define TPS_DATA_STATUS_DP_SPEC_PIN_ASSIGNMENT_A BIT(2)
+#define TPS_DATA_STATUS_DP_SPEC_PIN_ASSIGNMENT_B (BIT(2) | BIT(1))
+
#endif /* __TPS6598X_H__ */
diff --git a/drivers/usb/typec/tps6598x_trace.h b/drivers/usb/typec/tps6598x_trace.h
index c15327bb7bf1..0ec264bb2042 100644
--- a/drivers/usb/typec/tps6598x_trace.h
+++ b/drivers/usb/typec/tps6598x_trace.h
@@ -152,6 +152,41 @@
{ TPS_POWER_STATUS_BC12_STATUS_CDP, "cdp" }, \
{ TPS_POWER_STATUS_BC12_STATUS_SDP, "sdp" })
+#define TPS_DATA_STATUS_FLAGS_MASK (GENMASK(31, 0) ^ (TPS_DATA_STATUS_DP_PIN_ASSIGNMENT_MASK | \
+ TPS_DATA_STATUS_TBT_CABLE_SPEED_MASK | \
+ TPS_DATA_STATUS_TBT_CABLE_GEN_MASK))
+
+#define show_data_status_flags(data_status) \
+ __print_flags(data_status & TPS_DATA_STATUS_FLAGS_MASK, "|", \
+ { TPS_DATA_STATUS_DATA_CONNECTION, "DATA_CONNECTION" }, \
+ { TPS_DATA_STATUS_UPSIDE_DOWN, "DATA_UPSIDE_DOWN" }, \
+ { TPS_DATA_STATUS_ACTIVE_CABLE, "ACTIVE_CABLE" }, \
+ { TPS_DATA_STATUS_USB2_CONNECTION, "USB2_CONNECTION" }, \
+ { TPS_DATA_STATUS_USB3_CONNECTION, "USB3_CONNECTION" }, \
+ { TPS_DATA_STATUS_USB3_GEN2, "USB3_GEN2" }, \
+ { TPS_DATA_STATUS_USB_DATA_ROLE, "USB_DATA_ROLE" }, \
+ { TPS_DATA_STATUS_DP_CONNECTION, "DP_CONNECTION" }, \
+ { TPS_DATA_STATUS_DP_SINK, "DP_SINK" }, \
+ { TPS_DATA_STATUS_TBT_CONNECTION, "TBT_CONNECTION" }, \
+ { TPS_DATA_STATUS_TBT_TYPE, "TBT_TYPE" }, \
+ { TPS_DATA_STATUS_OPTICAL_CABLE, "OPTICAL_CABLE" }, \
+ { TPS_DATA_STATUS_ACTIVE_LINK_TRAIN, "ACTIVE_LINK_TRAIN" }, \
+ { TPS_DATA_STATUS_FORCE_LSX, "FORCE_LSX" }, \
+ { TPS_DATA_STATUS_POWER_MISMATCH, "POWER_MISMATCH" })
+
+#define show_data_status_dp_pin_assignment(data_status) \
+ __print_symbolic(TPS_DATA_STATUS_DP_SPEC_PIN_ASSIGNMENT(data_status), \
+ { TPS_DATA_STATUS_DP_SPEC_PIN_ASSIGNMENT_E, "E" }, \
+ { TPS_DATA_STATUS_DP_SPEC_PIN_ASSIGNMENT_F, "F" }, \
+ { TPS_DATA_STATUS_DP_SPEC_PIN_ASSIGNMENT_C, "C" }, \
+ { TPS_DATA_STATUS_DP_SPEC_PIN_ASSIGNMENT_D, "D" }, \
+ { TPS_DATA_STATUS_DP_SPEC_PIN_ASSIGNMENT_A, "A" }, \
+ { TPS_DATA_STATUS_DP_SPEC_PIN_ASSIGNMENT_B, "B" })
+
+#define maybe_show_data_status_dp_pin_assignment(data_status) \
+ (data_status & TPS_DATA_STATUS_DP_CONNECTION ? \
+ show_data_status_dp_pin_assignment(data_status) : "")
+
TRACE_EVENT(tps6598x_irq,
TP_PROTO(u64 event1,
u64 event2),
@@ -219,6 +254,25 @@ TRACE_EVENT(tps6598x_power_status,
)
);
+TRACE_EVENT(tps6598x_data_status,
+ TP_PROTO(u32 data_status),
+ TP_ARGS(data_status),
+
+ TP_STRUCT__entry(
+ __field(u32, data_status)
+ ),
+
+ TP_fast_assign(
+ __entry->data_status = data_status;
+ ),
+
+ TP_printk("%s%s%s",
+ show_data_status_flags(__entry->data_status),
+ __entry->data_status & TPS_DATA_STATUS_DP_CONNECTION ? ", DP pinout " : "",
+ maybe_show_data_status_dp_pin_assignment(__entry->data_status)
+ )
+);
+
#endif /* _TPS6598X_TRACE_H_ */
/* This part must be outside protection */
--
2.30.0
prev parent reply other threads:[~2021-02-11 17:03 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-11 15:51 [PATCH v1 0/4] usb: typec: tps6598x: Add IRQ flag and register tracing Guido Günther
2021-02-11 15:51 ` [PATCH v1 1/4] usb: typec: tps6598x: Add trace event for IRQ events Guido Günther
2021-02-11 21:21 ` kernel test robot
2021-02-11 15:51 ` [PATCH v1 2/4] usb: typec: tps6598x: Add trace event for status register Guido Günther
2021-02-11 18:04 ` kernel test robot
2021-02-11 22:02 ` kernel test robot
2021-02-11 15:51 ` [PATCH v1 3/4] usb: typec: tps6598x: Add trace event for power " Guido Günther
2021-02-11 22:59 ` kernel test robot
2021-02-11 15:51 ` Guido Günther [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=38b2be2f7bcfc025d6870391e19130dd488a8035.1613058605.git.agx@sigxcpu.org \
--to=agx@sigxcpu.org \
--cc=gregkh@linuxfoundation.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).