Re: [PATCH v2 0/2] clk: meson8b: add the video decoder clocks

[Jerome Brunet <jbrunet@baylibre.com>]

On Sun, 2019-03-24 at 16:14 +0100, Martin Blumenstingl wrote:
> This adds the video decoder clocks for Meson8, Meson8b and Meson8m2.
> 
> The clock tree on Meson8 differs from the one one Meson8b and Meson8m2.
> Details can be found in patch #2.
> 
> There are some checkpatch warnings in patch #2:
>   WARNING: please, no space before tabs
> I decided to still send the patch because we have the same inconsistency
> with all other clk_hw_onecell_data table entries. Please let me know if
> I should come up with a follow-up patch to clean them all up.

A cleanup patch is always appreciated :) Before or after your changes, I don't
really mind. Up to you.

Acked-by: Jerome Brunet <jbrunet@baylibre.com>

> 
> Testing:
> I have not tested this with Maxime's video decoder driver yet.
> However, I manually enabled and set various frequencies for the HCODEC
> clock and verified that clkmsr reports the correct rate.
> 
> Dependencies:
> This is meant to be applied on top of my other series from [0]:
>   clk: meson8b: add the VPU clock tree
> 
> Changes since v1 at [1]:
> - collected Neil's and Maxime's Reviewed-by (thank you!)
> 
> 
> [0] https://patchwork.kernel.org/cover/10860401/
> [1] https://patchwork.kernel.org/cover/10860513/
> 
> 
> Martin Blumenstingl (2):
>   dt-bindings: clock: meson8b: export the video decoder clocks
>   clk: meson: meson8b: add the video decoder clock trees
> 
>  drivers/clk/meson/meson8b.c              | 312 +++++++++++++++++++++++
>  drivers/clk/meson/meson8b.h              |  17 +-
>  include/dt-bindings/clock/meson8b-clkc.h |   4 +
>  3 files changed, 332 insertions(+), 1 deletion(-)
>